package v1

type HTTPIngressPathApplyConfiguration struct {
	// path is matched against the path of an incoming request. Currently it can
	// contain characters disallowed from the conventional "path" part of a URL
	// as defined by RFC 3986. Paths must begin with a '/' and must be present
	// when using PathType with value "Exact" or "Prefix".
	Path *string `json:"path,omitempty"`
	// pathType determines the interpretation of the path matching. PathType can
	// be one of the following values:
	// * Exact: Matches the URL path exactly.
	// * Prefix: Matches based on a URL path prefix split by '/'. Matching is
	// done on a path element by element basis. A path element refers is the
	// list of labels in the path split by the '/' separator. A request is a
	// match for path p if every p is an element-wise prefix of p of the
	// request path. Note that if the last element of the path is a substring
	// of the last element in request path, it is not a match (e.g. /foo/bar
	// matches /foo/bar/baz, but does not match /foo/barbaz).
	// * ImplementationSpecific: Interpretation of the Path matching is up to
	// the IngressClass. Implementations can treat this as a separate PathType
	// or treat it identically to Prefix or Exact path types.
	// Implementations are required to support all path types.
	PathType *networkingv1.PathType `json:"pathType,omitempty"`
	// backend defines the referenced service endpoint to which the traffic
	// will be forwarded to.
	Backend *IngressBackendApplyConfiguration `json:"backend,omitempty"`
}

HTTPIngressPathApplyConfiguration represents a declarative configuration of the HTTPIngressPath type for use with apply.

HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.

func HTTPIngressPath ¶

func HTTPIngressPath() *HTTPIngressPathApplyConfiguration

HTTPIngressPathApplyConfiguration constructs a declarative configuration of the HTTPIngressPath type for use with apply.

func (*HTTPIngressPathApplyConfiguration) WithBackend ¶

func (b *HTTPIngressPathApplyConfiguration) WithBackend(value *IngressBackendApplyConfiguration) *HTTPIngressPathApplyConfiguration

WithBackend sets the Backend field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Backend field is set to the value of the last call.

func (*HTTPIngressPathApplyConfiguration) WithPath ¶

func (b *HTTPIngressPathApplyConfiguration) WithPath(value string) *HTTPIngressPathApplyConfiguration

WithPath sets the Path field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Path field is set to the value of the last call.

func (*HTTPIngressPathApplyConfiguration) WithPathType ¶

func (b *HTTPIngressPathApplyConfiguration) WithPathType(value networkingv1.PathType) *HTTPIngressPathApplyConfiguration

WithPathType sets the PathType field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the PathType field is set to the value of the last call.

type HTTPIngressRuleValueApplyConfiguration ¶

type HTTPIngressRuleValueApplyConfiguration struct {
	// paths is a collection of paths that map requests to backends.
	Paths []HTTPIngressPathApplyConfiguration `json:"paths,omitempty"`
}

HTTPIngressRuleValueApplyConfiguration represents a declarative configuration of the HTTPIngressRuleValue type for use with apply.

HTTPIngressRuleValue is a list of http selectors pointing to backends. In the example: http://<host>/<path>?<searchpart> -> backend where where parts of the url correspond to RFC 3986, this resource will be used to match against everything after the last '/' and before the first '?' or '#'.

func HTTPIngressRuleValue ¶

func HTTPIngressRuleValue() *HTTPIngressRuleValueApplyConfiguration

HTTPIngressRuleValueApplyConfiguration constructs a declarative configuration of the HTTPIngressRuleValue type for use with apply.

func (*HTTPIngressRuleValueApplyConfiguration) WithPaths ¶

func (b *HTTPIngressRuleValueApplyConfiguration) WithPaths(values ...*HTTPIngressPathApplyConfiguration) *HTTPIngressRuleValueApplyConfiguration

WithPaths adds the given value to the Paths field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Paths field.

type IPAddressApplyConfiguration ¶

type IPAddressApplyConfiguration struct {
	metav1.TypeMetaApplyConfiguration `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	*metav1.ObjectMetaApplyConfiguration `json:"metadata,omitempty"`
	// spec is the desired state of the IPAddress.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	Spec *IPAddressSpecApplyConfiguration `json:"spec,omitempty"`
}

IPAddressApplyConfiguration represents a declarative configuration of the IPAddress type for use with apply.

IPAddress represents a single IP of a single IP Family. The object is designed to be used by APIs that operate on IP addresses. The object is used by the Service core API for allocation of IP addresses. An IP address can be represented in different formats, to guarantee the uniqueness of the IP, the name of the object is the IP address in canonical format, four decimal digits separated by dots suppressing leading zeros for IPv4 and the representation defined by RFC 5952 for IPv6. Valid: 192.168.1.5 or 2001:db8::1 or 2001:db8:aaaa:bbbb:cccc:dddd:eeee:1 Invalid: 10.01.2.3 or 2001:db8:0:0:0::1

func ExtractIPAddress ¶

func ExtractIPAddress(iPAddress *networkingv1.IPAddress, fieldManager string) (*IPAddressApplyConfiguration, error)

ExtractIPAddress extracts the applied configuration owned by fieldManager from iPAddress. If no managedFields are found in iPAddress for fieldManager, a IPAddressApplyConfiguration is returned with only the Name, Namespace (if applicable), APIVersion and Kind populated. It is possible that no managed fields were found for because other field managers have taken ownership of all the fields previously owned by fieldManager, or because the fieldManager never owned fields any fields. iPAddress must be a unmodified IPAddress API object that was retrieved from the Kubernetes API. ExtractIPAddress provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func ExtractIPAddressFrom ¶

func ExtractIPAddressFrom(iPAddress *networkingv1.IPAddress, fieldManager string, subresource string) (*IPAddressApplyConfiguration, error)

ExtractIPAddressFrom extracts the applied configuration owned by fieldManager from iPAddress for the specified subresource. Pass an empty string for subresource to extract the main resource. Common subresources include "status", "scale", etc. iPAddress must be a unmodified IPAddress API object that was retrieved from the Kubernetes API. ExtractIPAddressFrom provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func IPAddress ¶

func IPAddress(name string) *IPAddressApplyConfiguration

IPAddress constructs a declarative configuration of the IPAddress type for use with apply.

func (*IPAddressApplyConfiguration) GetAPIVersion ¶

func (b *IPAddressApplyConfiguration) GetAPIVersion() *string

GetAPIVersion retrieves the value of the APIVersion field in the declarative configuration.

func (*IPAddressApplyConfiguration) GetKind ¶

func (b *IPAddressApplyConfiguration) GetKind() *string

GetKind retrieves the value of the Kind field in the declarative configuration.

func (*IPAddressApplyConfiguration) GetName ¶

func (b *IPAddressApplyConfiguration) GetName() *string

GetName retrieves the value of the Name field in the declarative configuration.

func (*IPAddressApplyConfiguration) GetNamespace ¶

func (b *IPAddressApplyConfiguration) GetNamespace() *string

GetNamespace retrieves the value of the Namespace field in the declarative configuration.

func (IPAddressApplyConfiguration) IsApplyConfiguration ¶

func (b IPAddressApplyConfiguration) IsApplyConfiguration()

func (*IPAddressApplyConfiguration) WithAPIVersion ¶

func (b *IPAddressApplyConfiguration) WithAPIVersion(value string) *IPAddressApplyConfiguration

WithAPIVersion sets the APIVersion field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the APIVersion field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithAnnotations ¶

func (b *IPAddressApplyConfiguration) WithAnnotations(entries map[string]string) *IPAddressApplyConfiguration

WithAnnotations puts the entries into the Annotations field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, the entries provided by each call will be put on the Annotations field, overwriting an existing map entries in Annotations field with the same key.

func (*IPAddressApplyConfiguration) WithCreationTimestamp ¶

func (b *IPAddressApplyConfiguration) WithCreationTimestamp(value apismetav1.Time) *IPAddressApplyConfiguration

WithCreationTimestamp sets the CreationTimestamp field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the CreationTimestamp field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithDeletionGracePeriodSeconds ¶

func (b *IPAddressApplyConfiguration) WithDeletionGracePeriodSeconds(value int64) *IPAddressApplyConfiguration

WithDeletionGracePeriodSeconds sets the DeletionGracePeriodSeconds field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the DeletionGracePeriodSeconds field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithDeletionTimestamp ¶

func (b *IPAddressApplyConfiguration) WithDeletionTimestamp(value apismetav1.Time) *IPAddressApplyConfiguration

WithDeletionTimestamp sets the DeletionTimestamp field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the DeletionTimestamp field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithFinalizers ¶

func (b *IPAddressApplyConfiguration) WithFinalizers(values ...string) *IPAddressApplyConfiguration

WithFinalizers adds the given value to the Finalizers field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Finalizers field.

func (*IPAddressApplyConfiguration) WithGenerateName ¶

func (b *IPAddressApplyConfiguration) WithGenerateName(value string) *IPAddressApplyConfiguration

WithGenerateName sets the GenerateName field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the GenerateName field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithGeneration ¶

func (b *IPAddressApplyConfiguration) WithGeneration(value int64) *IPAddressApplyConfiguration

WithGeneration sets the Generation field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Generation field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithKind ¶

func (b *IPAddressApplyConfiguration) WithKind(value string) *IPAddressApplyConfiguration

WithKind sets the Kind field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Kind field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithLabels ¶

func (b *IPAddressApplyConfiguration) WithLabels(entries map[string]string) *IPAddressApplyConfiguration

WithLabels puts the entries into the Labels field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, the entries provided by each call will be put on the Labels field, overwriting an existing map entries in Labels field with the same key.

func (*IPAddressApplyConfiguration) WithName ¶

func (b *IPAddressApplyConfiguration) WithName(value string) *IPAddressApplyConfiguration

WithName sets the Name field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Name field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithNamespace ¶

func (b *IPAddressApplyConfiguration) WithNamespace(value string) *IPAddressApplyConfiguration

WithNamespace sets the Namespace field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Namespace field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithOwnerReferences ¶

func (b *IPAddressApplyConfiguration) WithOwnerReferences(values ...*metav1.OwnerReferenceApplyConfiguration) *IPAddressApplyConfiguration

WithOwnerReferences adds the given value to the OwnerReferences field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the OwnerReferences field.

func (*IPAddressApplyConfiguration) WithResourceVersion ¶

func (b *IPAddressApplyConfiguration) WithResourceVersion(value string) *IPAddressApplyConfiguration

WithResourceVersion sets the ResourceVersion field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the ResourceVersion field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithSpec ¶

func (b *IPAddressApplyConfiguration) WithSpec(value *IPAddressSpecApplyConfiguration) *IPAddressApplyConfiguration

WithSpec sets the Spec field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Spec field is set to the value of the last call.

func (*IPAddressApplyConfiguration) WithUID ¶

func (b *IPAddressApplyConfiguration) WithUID(value types.UID) *IPAddressApplyConfiguration

WithUID sets the UID field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the UID field is set to the value of the last call.

type IPAddressSpecApplyConfiguration ¶

type IPAddressSpecApplyConfiguration struct {
	// ParentRef references the resource that an IPAddress is attached to.
	// An IPAddress must reference a parent object.
	ParentRef *ParentReferenceApplyConfiguration `json:"parentRef,omitempty"`
}

IPAddressSpecApplyConfiguration represents a declarative configuration of the IPAddressSpec type for use with apply.

IPAddressSpec describe the attributes in an IP Address.

func IPAddressSpec ¶

func IPAddressSpec() *IPAddressSpecApplyConfiguration

IPAddressSpecApplyConfiguration constructs a declarative configuration of the IPAddressSpec type for use with apply.

func (*IPAddressSpecApplyConfiguration) WithParentRef ¶

func (b *IPAddressSpecApplyConfiguration) WithParentRef(value *ParentReferenceApplyConfiguration) *IPAddressSpecApplyConfiguration

WithParentRef sets the ParentRef field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the ParentRef field is set to the value of the last call.

type IPBlockApplyConfiguration ¶

type IPBlockApplyConfiguration struct {
	// cidr is a string representing the IPBlock
	// Valid examples are "192.168.1.0/24" or "2001:db8::/64"
	CIDR *string `json:"cidr,omitempty"`
	// except is a slice of CIDRs that should not be included within an IPBlock
	// Valid examples are "192.168.1.0/24" or "2001:db8::/64"
	// Except values will be rejected if they are outside the cidr range
	Except []string `json:"except,omitempty"`
}

IPBlockApplyConfiguration represents a declarative configuration of the IPBlock type for use with apply.

IPBlock describes a particular CIDR (Ex. "192.168.1.0/24","2001:db8::/64") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.

func IPBlock ¶

func IPBlock() *IPBlockApplyConfiguration

IPBlockApplyConfiguration constructs a declarative configuration of the IPBlock type for use with apply.

func (*IPBlockApplyConfiguration) WithCIDR ¶

func (b *IPBlockApplyConfiguration) WithCIDR(value string) *IPBlockApplyConfiguration

WithCIDR sets the CIDR field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the CIDR field is set to the value of the last call.

func (*IPBlockApplyConfiguration) WithExcept ¶

func (b *IPBlockApplyConfiguration) WithExcept(values ...string) *IPBlockApplyConfiguration

WithExcept adds the given value to the Except field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Except field.

type IngressApplyConfiguration ¶

type IngressApplyConfiguration struct {
	metav1.TypeMetaApplyConfiguration `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	*metav1.ObjectMetaApplyConfiguration `json:"metadata,omitempty"`
	// spec is the desired state of the Ingress.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	Spec *IngressSpecApplyConfiguration `json:"spec,omitempty"`
	// status is the current state of the Ingress.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	Status *IngressStatusApplyConfiguration `json:"status,omitempty"`
}

IngressApplyConfiguration represents a declarative configuration of the Ingress type for use with apply.

Ingress is a collection of rules that allow inbound connections to reach the endpoints defined by a backend. An Ingress can be configured to give services externally-reachable urls, load balance traffic, terminate SSL, offer name based virtual hosting etc.

func ExtractIngress ¶

func ExtractIngress(ingress *networkingv1.Ingress, fieldManager string) (*IngressApplyConfiguration, error)

ExtractIngress extracts the applied configuration owned by fieldManager from ingress. If no managedFields are found in ingress for fieldManager, a IngressApplyConfiguration is returned with only the Name, Namespace (if applicable), APIVersion and Kind populated. It is possible that no managed fields were found for because other field managers have taken ownership of all the fields previously owned by fieldManager, or because the fieldManager never owned fields any fields. ingress must be a unmodified Ingress API object that was retrieved from the Kubernetes API. ExtractIngress provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func ExtractIngressFrom ¶

func ExtractIngressFrom(ingress *networkingv1.Ingress, fieldManager string, subresource string) (*IngressApplyConfiguration, error)

ExtractIngressFrom extracts the applied configuration owned by fieldManager from ingress for the specified subresource. Pass an empty string for subresource to extract the main resource. Common subresources include "status", "scale", etc. ingress must be a unmodified Ingress API object that was retrieved from the Kubernetes API. ExtractIngressFrom provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func ExtractIngressStatus ¶

func ExtractIngressStatus(ingress *networkingv1.Ingress, fieldManager string) (*IngressApplyConfiguration, error)

ExtractIngressStatus extracts the applied configuration owned by fieldManager from ingress for the status subresource.

func Ingress ¶

func Ingress(name, namespace string) *IngressApplyConfiguration

Ingress constructs a declarative configuration of the Ingress type for use with apply.

func (*IngressApplyConfiguration) GetAPIVersion ¶

func (b *IngressApplyConfiguration) GetAPIVersion() *string

GetAPIVersion retrieves the value of the APIVersion field in the declarative configuration.

func (*IngressApplyConfiguration) GetKind ¶

func (b *IngressApplyConfiguration) GetKind() *string

GetKind retrieves the value of the Kind field in the declarative configuration.

func (*IngressApplyConfiguration) GetName ¶

func (b *IngressApplyConfiguration) GetName() *string

GetName retrieves the value of the Name field in the declarative configuration.

func (*IngressApplyConfiguration) GetNamespace ¶

func (b *IngressApplyConfiguration) GetNamespace() *string

GetNamespace retrieves the value of the Namespace field in the declarative configuration.

func (IngressApplyConfiguration) IsApplyConfiguration ¶

func (b IngressApplyConfiguration) IsApplyConfiguration()

func (*IngressApplyConfiguration) WithAPIVersion ¶

func (b *IngressApplyConfiguration) WithAPIVersion(value string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithAnnotations ¶

func (b *IngressApplyConfiguration) WithAnnotations(entries map[string]string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithCreationTimestamp ¶

func (b *IngressApplyConfiguration) WithCreationTimestamp(value apismetav1.Time) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithDeletionGracePeriodSeconds ¶

func (b *IngressApplyConfiguration) WithDeletionGracePeriodSeconds(value int64) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithDeletionTimestamp ¶

func (b *IngressApplyConfiguration) WithDeletionTimestamp(value apismetav1.Time) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithFinalizers ¶

func (b *IngressApplyConfiguration) WithFinalizers(values ...string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithGenerateName ¶

func (b *IngressApplyConfiguration) WithGenerateName(value string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithGeneration ¶

func (b *IngressApplyConfiguration) WithGeneration(value int64) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithKind ¶

func (b *IngressApplyConfiguration) WithKind(value string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithLabels ¶

func (b *IngressApplyConfiguration) WithLabels(entries map[string]string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithName ¶

func (b *IngressApplyConfiguration) WithName(value string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithNamespace ¶

func (b *IngressApplyConfiguration) WithNamespace(value string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithOwnerReferences ¶

func (b *IngressApplyConfiguration) WithOwnerReferences(values ...*metav1.OwnerReferenceApplyConfiguration) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithResourceVersion ¶

func (b *IngressApplyConfiguration) WithResourceVersion(value string) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithSpec ¶

func (b *IngressApplyConfiguration) WithSpec(value *IngressSpecApplyConfiguration) *IngressApplyConfiguration

func (*IngressApplyConfiguration) WithStatus ¶

func (b *IngressApplyConfiguration) WithStatus(value *IngressStatusApplyConfiguration) *IngressApplyConfiguration

WithStatus sets the Status field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Status field is set to the value of the last call.

func (*IngressApplyConfiguration) WithUID ¶

func (b *IngressApplyConfiguration) WithUID(value types.UID) *IngressApplyConfiguration

type IngressBackendApplyConfiguration ¶

type IngressBackendApplyConfiguration struct {
	// service references a service as a backend.
	// This is a mutually exclusive setting with "Resource".
	Service *IngressServiceBackendApplyConfiguration `json:"service,omitempty"`
	// resource is an ObjectRef to another Kubernetes resource in the namespace
	// of the Ingress object. If resource is specified, a service.Name and
	// service.Port must not be specified.
	// This is a mutually exclusive setting with "Service".
	Resource *corev1.TypedLocalObjectReferenceApplyConfiguration `json:"resource,omitempty"`
}

IngressBackendApplyConfiguration represents a declarative configuration of the IngressBackend type for use with apply.

IngressBackend describes all endpoints for a given service and port.

func IngressBackend ¶

func IngressBackend() *IngressBackendApplyConfiguration

IngressBackendApplyConfiguration constructs a declarative configuration of the IngressBackend type for use with apply.

func (*IngressBackendApplyConfiguration) WithResource ¶

func (b *IngressBackendApplyConfiguration) WithResource(value *corev1.TypedLocalObjectReferenceApplyConfiguration) *IngressBackendApplyConfiguration

WithResource sets the Resource field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Resource field is set to the value of the last call.

func (*IngressBackendApplyConfiguration) WithService ¶

func (b *IngressBackendApplyConfiguration) WithService(value *IngressServiceBackendApplyConfiguration) *IngressBackendApplyConfiguration

WithService sets the Service field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Service field is set to the value of the last call.

type IngressClassApplyConfiguration ¶

type IngressClassApplyConfiguration struct {
	metav1.TypeMetaApplyConfiguration `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	*metav1.ObjectMetaApplyConfiguration `json:"metadata,omitempty"`
	// spec is the desired state of the IngressClass.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	Spec *IngressClassSpecApplyConfiguration `json:"spec,omitempty"`
}

IngressClassApplyConfiguration represents a declarative configuration of the IngressClass type for use with apply.

IngressClass represents the class of the Ingress, referenced by the Ingress Spec. The `ingressclass.kubernetes.io/is-default-class` annotation can be used to indicate that an IngressClass should be considered default. When a single IngressClass resource has this annotation set to true, new Ingress resources without a class specified will be assigned this default class.

func ExtractIngressClass ¶

func ExtractIngressClass(ingressClass *networkingv1.IngressClass, fieldManager string) (*IngressClassApplyConfiguration, error)

ExtractIngressClass extracts the applied configuration owned by fieldManager from ingressClass. If no managedFields are found in ingressClass for fieldManager, a IngressClassApplyConfiguration is returned with only the Name, Namespace (if applicable), APIVersion and Kind populated. It is possible that no managed fields were found for because other field managers have taken ownership of all the fields previously owned by fieldManager, or because the fieldManager never owned fields any fields. ingressClass must be a unmodified IngressClass API object that was retrieved from the Kubernetes API. ExtractIngressClass provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func ExtractIngressClassFrom ¶

func ExtractIngressClassFrom(ingressClass *networkingv1.IngressClass, fieldManager string, subresource string) (*IngressClassApplyConfiguration, error)

ExtractIngressClassFrom extracts the applied configuration owned by fieldManager from ingressClass for the specified subresource. Pass an empty string for subresource to extract the main resource. Common subresources include "status", "scale", etc. ingressClass must be a unmodified IngressClass API object that was retrieved from the Kubernetes API. ExtractIngressClassFrom provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func IngressClass ¶

func IngressClass(name string) *IngressClassApplyConfiguration

IngressClass constructs a declarative configuration of the IngressClass type for use with apply.

func (*IngressClassApplyConfiguration) GetAPIVersion ¶

func (b *IngressClassApplyConfiguration) GetAPIVersion() *string

GetAPIVersion retrieves the value of the APIVersion field in the declarative configuration.

func (*IngressClassApplyConfiguration) GetKind ¶

func (b *IngressClassApplyConfiguration) GetKind() *string

GetKind retrieves the value of the Kind field in the declarative configuration.

func (*IngressClassApplyConfiguration) GetName ¶

func (b *IngressClassApplyConfiguration) GetName() *string

GetName retrieves the value of the Name field in the declarative configuration.

func (*IngressClassApplyConfiguration) GetNamespace ¶

func (b *IngressClassApplyConfiguration) GetNamespace() *string

GetNamespace retrieves the value of the Namespace field in the declarative configuration.

func (IngressClassApplyConfiguration) IsApplyConfiguration ¶

func (b IngressClassApplyConfiguration) IsApplyConfiguration()

func (*IngressClassApplyConfiguration) WithAPIVersion ¶

func (b *IngressClassApplyConfiguration) WithAPIVersion(value string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithAnnotations ¶

func (b *IngressClassApplyConfiguration) WithAnnotations(entries map[string]string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithCreationTimestamp ¶

func (b *IngressClassApplyConfiguration) WithCreationTimestamp(value apismetav1.Time) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithDeletionGracePeriodSeconds ¶

func (b *IngressClassApplyConfiguration) WithDeletionGracePeriodSeconds(value int64) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithDeletionTimestamp ¶

func (b *IngressClassApplyConfiguration) WithDeletionTimestamp(value apismetav1.Time) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithFinalizers ¶

func (b *IngressClassApplyConfiguration) WithFinalizers(values ...string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithGenerateName ¶

func (b *IngressClassApplyConfiguration) WithGenerateName(value string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithGeneration ¶

func (b *IngressClassApplyConfiguration) WithGeneration(value int64) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithKind ¶

func (b *IngressClassApplyConfiguration) WithKind(value string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithLabels ¶

func (b *IngressClassApplyConfiguration) WithLabels(entries map[string]string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithName ¶

func (b *IngressClassApplyConfiguration) WithName(value string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithNamespace ¶

func (b *IngressClassApplyConfiguration) WithNamespace(value string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithOwnerReferences ¶

func (b *IngressClassApplyConfiguration) WithOwnerReferences(values ...*metav1.OwnerReferenceApplyConfiguration) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithResourceVersion ¶

func (b *IngressClassApplyConfiguration) WithResourceVersion(value string) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithSpec ¶

func (b *IngressClassApplyConfiguration) WithSpec(value *IngressClassSpecApplyConfiguration) *IngressClassApplyConfiguration

func (*IngressClassApplyConfiguration) WithUID ¶

func (b *IngressClassApplyConfiguration) WithUID(value types.UID) *IngressClassApplyConfiguration

type IngressClassParametersReferenceApplyConfiguration ¶

type IngressClassParametersReferenceApplyConfiguration struct {
	// apiGroup is the group for the resource being referenced. If APIGroup is
	// not specified, the specified Kind must be in the core API group. For any
	// other third-party types, APIGroup is required.
	APIGroup *string `json:"apiGroup,omitempty"`
	// kind is the type of resource being referenced.
	Kind *string `json:"kind,omitempty"`
	// name is the name of resource being referenced.
	Name *string `json:"name,omitempty"`
	// scope represents if this refers to a cluster or namespace scoped resource.
	// This may be set to "Cluster" (default) or "Namespace".
	Scope *string `json:"scope,omitempty"`
	// namespace is the namespace of the resource being referenced. This field is
	// required when scope is set to "Namespace" and must be unset when scope is set to
	// "Cluster".
	Namespace *string `json:"namespace,omitempty"`
}

IngressClassParametersReferenceApplyConfiguration represents a declarative configuration of the IngressClassParametersReference type for use with apply.

IngressClassParametersReference identifies an API object. This can be used to specify a cluster or namespace-scoped resource.

func IngressClassParametersReference ¶

func IngressClassParametersReference() *IngressClassParametersReferenceApplyConfiguration

IngressClassParametersReferenceApplyConfiguration constructs a declarative configuration of the IngressClassParametersReference type for use with apply.

func (*IngressClassParametersReferenceApplyConfiguration) WithAPIGroup ¶

func (b *IngressClassParametersReferenceApplyConfiguration) WithAPIGroup(value string) *IngressClassParametersReferenceApplyConfiguration

WithAPIGroup sets the APIGroup field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the APIGroup field is set to the value of the last call.

func (*IngressClassParametersReferenceApplyConfiguration) WithKind ¶

func (b *IngressClassParametersReferenceApplyConfiguration) WithKind(value string) *IngressClassParametersReferenceApplyConfiguration

func (*IngressClassParametersReferenceApplyConfiguration) WithName ¶

func (b *IngressClassParametersReferenceApplyConfiguration) WithName(value string) *IngressClassParametersReferenceApplyConfiguration

func (*IngressClassParametersReferenceApplyConfiguration) WithNamespace ¶

func (b *IngressClassParametersReferenceApplyConfiguration) WithNamespace(value string) *IngressClassParametersReferenceApplyConfiguration

func (*IngressClassParametersReferenceApplyConfiguration) WithScope ¶

func (b *IngressClassParametersReferenceApplyConfiguration) WithScope(value string) *IngressClassParametersReferenceApplyConfiguration

WithScope sets the Scope field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Scope field is set to the value of the last call.

type IngressClassSpecApplyConfiguration ¶

type IngressClassSpecApplyConfiguration struct {
	// controller refers to the name of the controller that should handle this
	// class. This allows for different "flavors" that are controlled by the
	// same controller. For example, you may have different parameters for the
	// same implementing controller. This should be specified as a
	// domain-prefixed path no more than 250 characters in length, e.g.
	// "acme.io/ingress-controller". This field is immutable.
	Controller *string `json:"controller,omitempty"`
	// parameters is a link to a custom resource containing additional
	// configuration for the controller. This is optional if the controller does
	// not require extra parameters.
	Parameters *IngressClassParametersReferenceApplyConfiguration `json:"parameters,omitempty"`
}

IngressClassSpecApplyConfiguration represents a declarative configuration of the IngressClassSpec type for use with apply.

IngressClassSpec provides information about the class of an Ingress.

func IngressClassSpec ¶

func IngressClassSpec() *IngressClassSpecApplyConfiguration

IngressClassSpecApplyConfiguration constructs a declarative configuration of the IngressClassSpec type for use with apply.

func (*IngressClassSpecApplyConfiguration) WithController ¶

func (b *IngressClassSpecApplyConfiguration) WithController(value string) *IngressClassSpecApplyConfiguration

WithController sets the Controller field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Controller field is set to the value of the last call.

func (*IngressClassSpecApplyConfiguration) WithParameters ¶

func (b *IngressClassSpecApplyConfiguration) WithParameters(value *IngressClassParametersReferenceApplyConfiguration) *IngressClassSpecApplyConfiguration

WithParameters sets the Parameters field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Parameters field is set to the value of the last call.

type IngressLoadBalancerIngressApplyConfiguration ¶

type IngressLoadBalancerIngressApplyConfiguration struct {
	// ip is set for load-balancer ingress points that are IP based.
	IP *string `json:"ip,omitempty"`
	// hostname is set for load-balancer ingress points that are DNS based.
	Hostname *string `json:"hostname,omitempty"`
	// ports provides information about the ports exposed by this LoadBalancer.
	Ports []IngressPortStatusApplyConfiguration `json:"ports,omitempty"`
}

IngressLoadBalancerIngressApplyConfiguration represents a declarative configuration of the IngressLoadBalancerIngress type for use with apply.

IngressLoadBalancerIngress represents the status of a load-balancer ingress point.

func IngressLoadBalancerIngress ¶

func IngressLoadBalancerIngress() *IngressLoadBalancerIngressApplyConfiguration

IngressLoadBalancerIngressApplyConfiguration constructs a declarative configuration of the IngressLoadBalancerIngress type for use with apply.

func (*IngressLoadBalancerIngressApplyConfiguration) WithHostname ¶

func (b *IngressLoadBalancerIngressApplyConfiguration) WithHostname(value string) *IngressLoadBalancerIngressApplyConfiguration

WithHostname sets the Hostname field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Hostname field is set to the value of the last call.

func (*IngressLoadBalancerIngressApplyConfiguration) WithIP ¶

func (b *IngressLoadBalancerIngressApplyConfiguration) WithIP(value string) *IngressLoadBalancerIngressApplyConfiguration

WithIP sets the IP field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the IP field is set to the value of the last call.

func (*IngressLoadBalancerIngressApplyConfiguration) WithPorts ¶

func (b *IngressLoadBalancerIngressApplyConfiguration) WithPorts(values ...*IngressPortStatusApplyConfiguration) *IngressLoadBalancerIngressApplyConfiguration

WithPorts adds the given value to the Ports field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Ports field.

type IngressLoadBalancerStatusApplyConfiguration ¶

type IngressLoadBalancerStatusApplyConfiguration struct {
	// ingress is a list containing ingress points for the load-balancer.
	Ingress []IngressLoadBalancerIngressApplyConfiguration `json:"ingress,omitempty"`
}

IngressLoadBalancerStatusApplyConfiguration represents a declarative configuration of the IngressLoadBalancerStatus type for use with apply.

IngressLoadBalancerStatus represents the status of a load-balancer.

func IngressLoadBalancerStatus ¶

func IngressLoadBalancerStatus() *IngressLoadBalancerStatusApplyConfiguration

IngressLoadBalancerStatusApplyConfiguration constructs a declarative configuration of the IngressLoadBalancerStatus type for use with apply.

func (*IngressLoadBalancerStatusApplyConfiguration) WithIngress ¶

func (b *IngressLoadBalancerStatusApplyConfiguration) WithIngress(values ...*IngressLoadBalancerIngressApplyConfiguration) *IngressLoadBalancerStatusApplyConfiguration

WithIngress adds the given value to the Ingress field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Ingress field.

type IngressPortStatusApplyConfiguration ¶

type IngressPortStatusApplyConfiguration struct {
	// port is the port number of the ingress port.
	Port *int32 `json:"port,omitempty"`
	// protocol is the protocol of the ingress port.
	// The supported values are: "TCP", "UDP", "SCTP"
	Protocol *corev1.Protocol `json:"protocol,omitempty"`
	// error is to record the problem with the service port
	// The format of the error shall comply with the following rules:
	// - built-in error values shall be specified in this file and those shall use
	// CamelCase names
	// - cloud provider specific error values must have names that comply with the
	// format foo.example.com/CamelCase.
	// ---
	// The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt)
	Error *string `json:"error,omitempty"`
}

IngressPortStatusApplyConfiguration represents a declarative configuration of the IngressPortStatus type for use with apply.

IngressPortStatus represents the error condition of a service port

func IngressPortStatus ¶

func IngressPortStatus() *IngressPortStatusApplyConfiguration

IngressPortStatusApplyConfiguration constructs a declarative configuration of the IngressPortStatus type for use with apply.

func (*IngressPortStatusApplyConfiguration) WithError ¶

func (b *IngressPortStatusApplyConfiguration) WithError(value string) *IngressPortStatusApplyConfiguration

WithError sets the Error field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Error field is set to the value of the last call.

func (*IngressPortStatusApplyConfiguration) WithPort ¶

func (b *IngressPortStatusApplyConfiguration) WithPort(value int32) *IngressPortStatusApplyConfiguration

WithPort sets the Port field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Port field is set to the value of the last call.

func (*IngressPortStatusApplyConfiguration) WithProtocol ¶

func (b *IngressPortStatusApplyConfiguration) WithProtocol(value corev1.Protocol) *IngressPortStatusApplyConfiguration

WithProtocol sets the Protocol field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Protocol field is set to the value of the last call.

type IngressRuleApplyConfiguration ¶

type IngressRuleApplyConfiguration struct {
	// host is the fully qualified domain name of a network host, as defined by RFC 3986.
	// Note the following deviations from the "host" part of the
	// URI as defined in RFC 3986:
	// 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
	// the IP in the Spec of the parent Ingress.
	// 2. The `:` delimiter is not respected because ports are not allowed.
	// Currently the port of an Ingress is implicitly :80 for http and
	// :443 for https.
	// Both these may change in the future.
	// Incoming requests are matched against the host before the
	// IngressRuleValue. If the host is unspecified, the Ingress routes all
	// traffic based on the specified IngressRuleValue.
	//
	// host can be "precise" which is a domain name without the terminating dot of
	// a network host (e.g. "foo.bar.com") or "wildcard", which is a domain name
	// prefixed with a single wildcard label (e.g. "*.foo.com").
	// The wildcard character '*' must appear by itself as the first DNS label and
	// matches only a single label. You cannot have a wildcard label by itself (e.g. Host == "*").
	// Requests will be matched against the Host field in the following way:
	// 1. If host is precise, the request matches this rule if the http host header is equal to Host.
	// 2. If host is a wildcard, then the request matches this rule if the http host header
	// is to equal to the suffix (removing the first label) of the wildcard rule.
	Host *string `json:"host,omitempty"`
	// IngressRuleValue represents a rule to route requests for this IngressRule.
	// If unspecified, the rule defaults to a http catch-all. Whether that sends
	// just traffic matching the host to the default backend or all traffic to the
	// default backend, is left to the controller fulfilling the Ingress. Http is
	// currently the only supported IngressRuleValue.
	IngressRuleValueApplyConfiguration `json:",inline"`
}

IngressRuleApplyConfiguration represents a declarative configuration of the IngressRule type for use with apply.

IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.

func IngressRule ¶

func IngressRule() *IngressRuleApplyConfiguration

IngressRuleApplyConfiguration constructs a declarative configuration of the IngressRule type for use with apply.

func (*IngressRuleApplyConfiguration) WithHTTP ¶

func (b *IngressRuleApplyConfiguration) WithHTTP(value *HTTPIngressRuleValueApplyConfiguration) *IngressRuleApplyConfiguration

WithHTTP sets the HTTP field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the HTTP field is set to the value of the last call.

func (*IngressRuleApplyConfiguration) WithHost ¶

func (b *IngressRuleApplyConfiguration) WithHost(value string) *IngressRuleApplyConfiguration

WithHost sets the Host field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Host field is set to the value of the last call.

type IngressRuleValueApplyConfiguration ¶

type IngressRuleValueApplyConfiguration struct {
	HTTP *HTTPIngressRuleValueApplyConfiguration `json:"http,omitempty"`
}

IngressRuleValueApplyConfiguration represents a declarative configuration of the IngressRuleValue type for use with apply.

IngressRuleValue represents a rule to apply against incoming requests. If the rule is satisfied, the request is routed to the specified backend. Currently mixing different types of rules in a single Ingress is disallowed, so exactly one of the following must be set.

func IngressRuleValue ¶

func IngressRuleValue() *IngressRuleValueApplyConfiguration

IngressRuleValueApplyConfiguration constructs a declarative configuration of the IngressRuleValue type for use with apply.

func (*IngressRuleValueApplyConfiguration) WithHTTP ¶

func (b *IngressRuleValueApplyConfiguration) WithHTTP(value *HTTPIngressRuleValueApplyConfiguration) *IngressRuleValueApplyConfiguration

type IngressServiceBackendApplyConfiguration ¶

type IngressServiceBackendApplyConfiguration struct {
	// name is the referenced service. The service must exist in
	// the same namespace as the Ingress object.
	Name *string `json:"name,omitempty"`
	// port of the referenced service. A port name or port number
	// is required for a IngressServiceBackend.
	Port *ServiceBackendPortApplyConfiguration `json:"port,omitempty"`
}

IngressServiceBackendApplyConfiguration represents a declarative configuration of the IngressServiceBackend type for use with apply.

IngressServiceBackend references a Kubernetes Service as a Backend.

func IngressServiceBackend ¶

func IngressServiceBackend() *IngressServiceBackendApplyConfiguration

IngressServiceBackendApplyConfiguration constructs a declarative configuration of the IngressServiceBackend type for use with apply.

func (*IngressServiceBackendApplyConfiguration) WithName ¶

func (b *IngressServiceBackendApplyConfiguration) WithName(value string) *IngressServiceBackendApplyConfiguration

func (*IngressServiceBackendApplyConfiguration) WithPort ¶

func (b *IngressServiceBackendApplyConfiguration) WithPort(value *ServiceBackendPortApplyConfiguration) *IngressServiceBackendApplyConfiguration

type IngressSpecApplyConfiguration ¶

type IngressSpecApplyConfiguration struct {
	// ingressClassName is the name of an IngressClass cluster resource. Ingress
	// controller implementations use this field to know whether they should be
	// serving this Ingress resource, by a transitive connection
	// (controller -> IngressClass -> Ingress resource). Although the
	// `kubernetes.io/ingress.class` annotation (simple constant name) was never
	// formally defined, it was widely supported by Ingress controllers to create
	// a direct binding between Ingress controller and Ingress resources. Newly
	// created Ingress resources should prefer using the field. However, even
	// though the annotation is officially deprecated, for backwards compatibility
	// reasons, ingress controllers should still honor that annotation if present.
	IngressClassName *string `json:"ingressClassName,omitempty"`
	// defaultBackend is the backend that should handle requests that don't
	// match any rule. If Rules are not specified, DefaultBackend must be specified.
	// If DefaultBackend is not set, the handling of requests that do not match any
	// of the rules will be up to the Ingress controller.
	DefaultBackend *IngressBackendApplyConfiguration `json:"defaultBackend,omitempty"`
	// tls represents the TLS configuration. Currently the Ingress only supports a
	// single TLS port, 443. If multiple members of this list specify different hosts,
	// they will be multiplexed on the same port according to the hostname specified
	// through the SNI TLS extension, if the ingress controller fulfilling the
	// ingress supports SNI.
	TLS []IngressTLSApplyConfiguration `json:"tls,omitempty"`
	// rules is a list of host rules used to configure the Ingress. If unspecified,
	// or no rule matches, all traffic is sent to the default backend.
	Rules []IngressRuleApplyConfiguration `json:"rules,omitempty"`
}

IngressSpecApplyConfiguration represents a declarative configuration of the IngressSpec type for use with apply.

IngressSpec describes the Ingress the user wishes to exist.

func IngressSpec ¶

func IngressSpec() *IngressSpecApplyConfiguration

IngressSpecApplyConfiguration constructs a declarative configuration of the IngressSpec type for use with apply.

func (*IngressSpecApplyConfiguration) WithDefaultBackend ¶

func (b *IngressSpecApplyConfiguration) WithDefaultBackend(value *IngressBackendApplyConfiguration) *IngressSpecApplyConfiguration

WithDefaultBackend sets the DefaultBackend field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the DefaultBackend field is set to the value of the last call.

func (*IngressSpecApplyConfiguration) WithIngressClassName ¶

func (b *IngressSpecApplyConfiguration) WithIngressClassName(value string) *IngressSpecApplyConfiguration

WithIngressClassName sets the IngressClassName field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the IngressClassName field is set to the value of the last call.

func (*IngressSpecApplyConfiguration) WithRules ¶

func (b *IngressSpecApplyConfiguration) WithRules(values ...*IngressRuleApplyConfiguration) *IngressSpecApplyConfiguration

WithRules adds the given value to the Rules field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Rules field.

func (*IngressSpecApplyConfiguration) WithTLS ¶

func (b *IngressSpecApplyConfiguration) WithTLS(values ...*IngressTLSApplyConfiguration) *IngressSpecApplyConfiguration

WithTLS adds the given value to the TLS field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the TLS field.

type IngressStatusApplyConfiguration ¶

type IngressStatusApplyConfiguration struct {
	// loadBalancer contains the current status of the load-balancer.
	LoadBalancer *IngressLoadBalancerStatusApplyConfiguration `json:"loadBalancer,omitempty"`
}

IngressStatusApplyConfiguration represents a declarative configuration of the IngressStatus type for use with apply.

IngressStatus describe the current state of the Ingress.

func IngressStatus ¶

func IngressStatus() *IngressStatusApplyConfiguration

IngressStatusApplyConfiguration constructs a declarative configuration of the IngressStatus type for use with apply.

func (*IngressStatusApplyConfiguration) WithLoadBalancer ¶

func (b *IngressStatusApplyConfiguration) WithLoadBalancer(value *IngressLoadBalancerStatusApplyConfiguration) *IngressStatusApplyConfiguration

WithLoadBalancer sets the LoadBalancer field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the LoadBalancer field is set to the value of the last call.

type IngressTLSApplyConfiguration ¶

type IngressTLSApplyConfiguration struct {
	// hosts is a list of hosts included in the TLS certificate. The values in
	// this list must match the name/s used in the tlsSecret. Defaults to the
	// wildcard host setting for the loadbalancer controller fulfilling this
	// Ingress, if left unspecified.
	Hosts []string `json:"hosts,omitempty"`
	// secretName is the name of the secret used to terminate TLS traffic on
	// port 443. Field is left optional to allow TLS routing based on SNI
	// hostname alone. If the SNI host in a listener conflicts with the "Host"
	// header field used by an IngressRule, the SNI host is used for termination
	// and value of the "Host" header is used for routing.
	SecretName *string `json:"secretName,omitempty"`
}

IngressTLSApplyConfiguration represents a declarative configuration of the IngressTLS type for use with apply.

IngressTLS describes the transport layer security associated with an ingress.

func IngressTLS ¶

func IngressTLS() *IngressTLSApplyConfiguration

IngressTLSApplyConfiguration constructs a declarative configuration of the IngressTLS type for use with apply.

func (*IngressTLSApplyConfiguration) WithHosts ¶

func (b *IngressTLSApplyConfiguration) WithHosts(values ...string) *IngressTLSApplyConfiguration

WithHosts adds the given value to the Hosts field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Hosts field.

func (*IngressTLSApplyConfiguration) WithSecretName ¶

func (b *IngressTLSApplyConfiguration) WithSecretName(value string) *IngressTLSApplyConfiguration

WithSecretName sets the SecretName field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the SecretName field is set to the value of the last call.

type NetworkPolicyApplyConfiguration ¶

type NetworkPolicyApplyConfiguration struct {
	metav1.TypeMetaApplyConfiguration `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	*metav1.ObjectMetaApplyConfiguration `json:"metadata,omitempty"`
	// spec represents the specification of the desired behavior for this NetworkPolicy.
	Spec *NetworkPolicySpecApplyConfiguration `json:"spec,omitempty"`
}

NetworkPolicyApplyConfiguration represents a declarative configuration of the NetworkPolicy type for use with apply.

NetworkPolicy describes what network traffic is allowed for a set of Pods

func ExtractNetworkPolicy ¶

func ExtractNetworkPolicy(networkPolicy *networkingv1.NetworkPolicy, fieldManager string) (*NetworkPolicyApplyConfiguration, error)

ExtractNetworkPolicy extracts the applied configuration owned by fieldManager from networkPolicy. If no managedFields are found in networkPolicy for fieldManager, a NetworkPolicyApplyConfiguration is returned with only the Name, Namespace (if applicable), APIVersion and Kind populated. It is possible that no managed fields were found for because other field managers have taken ownership of all the fields previously owned by fieldManager, or because the fieldManager never owned fields any fields. networkPolicy must be a unmodified NetworkPolicy API object that was retrieved from the Kubernetes API. ExtractNetworkPolicy provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func ExtractNetworkPolicyFrom ¶

func ExtractNetworkPolicyFrom(networkPolicy *networkingv1.NetworkPolicy, fieldManager string, subresource string) (*NetworkPolicyApplyConfiguration, error)

ExtractNetworkPolicyFrom extracts the applied configuration owned by fieldManager from networkPolicy for the specified subresource. Pass an empty string for subresource to extract the main resource. Common subresources include "status", "scale", etc. networkPolicy must be a unmodified NetworkPolicy API object that was retrieved from the Kubernetes API. ExtractNetworkPolicyFrom provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func NetworkPolicy ¶

func NetworkPolicy(name, namespace string) *NetworkPolicyApplyConfiguration

NetworkPolicy constructs a declarative configuration of the NetworkPolicy type for use with apply.

func (*NetworkPolicyApplyConfiguration) GetAPIVersion ¶

func (b *NetworkPolicyApplyConfiguration) GetAPIVersion() *string

GetAPIVersion retrieves the value of the APIVersion field in the declarative configuration.

func (*NetworkPolicyApplyConfiguration) GetKind ¶

func (b *NetworkPolicyApplyConfiguration) GetKind() *string

GetKind retrieves the value of the Kind field in the declarative configuration.

func (*NetworkPolicyApplyConfiguration) GetName ¶

func (b *NetworkPolicyApplyConfiguration) GetName() *string

GetName retrieves the value of the Name field in the declarative configuration.

func (*NetworkPolicyApplyConfiguration) GetNamespace ¶

func (b *NetworkPolicyApplyConfiguration) GetNamespace() *string

GetNamespace retrieves the value of the Namespace field in the declarative configuration.

func (NetworkPolicyApplyConfiguration) IsApplyConfiguration ¶

func (b NetworkPolicyApplyConfiguration) IsApplyConfiguration()

func (*NetworkPolicyApplyConfiguration) WithAPIVersion ¶

func (b *NetworkPolicyApplyConfiguration) WithAPIVersion(value string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithAnnotations ¶

func (b *NetworkPolicyApplyConfiguration) WithAnnotations(entries map[string]string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithCreationTimestamp ¶

func (b *NetworkPolicyApplyConfiguration) WithCreationTimestamp(value apismetav1.Time) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithDeletionGracePeriodSeconds ¶

func (b *NetworkPolicyApplyConfiguration) WithDeletionGracePeriodSeconds(value int64) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithDeletionTimestamp ¶

func (b *NetworkPolicyApplyConfiguration) WithDeletionTimestamp(value apismetav1.Time) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithFinalizers ¶

func (b *NetworkPolicyApplyConfiguration) WithFinalizers(values ...string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithGenerateName ¶

func (b *NetworkPolicyApplyConfiguration) WithGenerateName(value string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithGeneration ¶

func (b *NetworkPolicyApplyConfiguration) WithGeneration(value int64) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithKind ¶

func (b *NetworkPolicyApplyConfiguration) WithKind(value string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithLabels ¶

func (b *NetworkPolicyApplyConfiguration) WithLabels(entries map[string]string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithName ¶

func (b *NetworkPolicyApplyConfiguration) WithName(value string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithNamespace ¶

func (b *NetworkPolicyApplyConfiguration) WithNamespace(value string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithOwnerReferences ¶

func (b *NetworkPolicyApplyConfiguration) WithOwnerReferences(values ...*metav1.OwnerReferenceApplyConfiguration) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithResourceVersion ¶

func (b *NetworkPolicyApplyConfiguration) WithResourceVersion(value string) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithSpec ¶

func (b *NetworkPolicyApplyConfiguration) WithSpec(value *NetworkPolicySpecApplyConfiguration) *NetworkPolicyApplyConfiguration

func (*NetworkPolicyApplyConfiguration) WithUID ¶

func (b *NetworkPolicyApplyConfiguration) WithUID(value types.UID) *NetworkPolicyApplyConfiguration

type NetworkPolicyEgressRuleApplyConfiguration ¶

type NetworkPolicyEgressRuleApplyConfiguration struct {
	// ports is a list of destination ports for outgoing traffic.
	// Each item in this list is combined using a logical OR. If this field is
	// empty or missing, this rule matches all ports (traffic not restricted by port).
	// If this field is present and contains at least one item, then this rule allows
	// traffic only if the traffic matches at least one port in the list.
	Ports []NetworkPolicyPortApplyConfiguration `json:"ports,omitempty"`
	// to is a list of destinations for outgoing traffic of pods selected for this rule.
	// Items in this list are combined using a logical OR operation. If this field is
	// empty or missing, this rule matches all destinations (traffic not restricted by
	// destination). If this field is present and contains at least one item, this rule
	// allows traffic only if the traffic matches at least one item in the to list.
	To []NetworkPolicyPeerApplyConfiguration `json:"to,omitempty"`
}

NetworkPolicyEgressRuleApplyConfiguration represents a declarative configuration of the NetworkPolicyEgressRule type for use with apply.

NetworkPolicyEgressRule describes a particular set of traffic that is allowed out of pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and to. This type is beta-level in 1.8

func NetworkPolicyEgressRule ¶

func NetworkPolicyEgressRule() *NetworkPolicyEgressRuleApplyConfiguration

NetworkPolicyEgressRuleApplyConfiguration constructs a declarative configuration of the NetworkPolicyEgressRule type for use with apply.

func (*NetworkPolicyEgressRuleApplyConfiguration) WithPorts ¶

func (b *NetworkPolicyEgressRuleApplyConfiguration) WithPorts(values ...*NetworkPolicyPortApplyConfiguration) *NetworkPolicyEgressRuleApplyConfiguration

func (*NetworkPolicyEgressRuleApplyConfiguration) WithTo ¶

func (b *NetworkPolicyEgressRuleApplyConfiguration) WithTo(values ...*NetworkPolicyPeerApplyConfiguration) *NetworkPolicyEgressRuleApplyConfiguration

WithTo adds the given value to the To field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the To field.

type NetworkPolicyIngressRuleApplyConfiguration ¶

type NetworkPolicyIngressRuleApplyConfiguration struct {
	// ports is a list of ports which should be made accessible on the pods selected for
	// this rule. Each item in this list is combined using a logical OR. If this field is
	// empty or missing, this rule matches all ports (traffic not restricted by port).
	// If this field is present and contains at least one item, then this rule allows
	// traffic only if the traffic matches at least one port in the list.
	Ports []NetworkPolicyPortApplyConfiguration `json:"ports,omitempty"`
	// from is a list of sources which should be able to access the pods selected for this rule.
	// Items in this list are combined using a logical OR operation. If this field is
	// empty or missing, this rule matches all sources (traffic not restricted by
	// source). If this field is present and contains at least one item, this rule
	// allows traffic only if the traffic matches at least one item in the from list.
	From []NetworkPolicyPeerApplyConfiguration `json:"from,omitempty"`
}

NetworkPolicyIngressRuleApplyConfiguration represents a declarative configuration of the NetworkPolicyIngressRule type for use with apply.

NetworkPolicyIngressRule describes a particular set of traffic that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and from.

func NetworkPolicyIngressRule ¶

func NetworkPolicyIngressRule() *NetworkPolicyIngressRuleApplyConfiguration

NetworkPolicyIngressRuleApplyConfiguration constructs a declarative configuration of the NetworkPolicyIngressRule type for use with apply.

func (*NetworkPolicyIngressRuleApplyConfiguration) WithFrom ¶

func (b *NetworkPolicyIngressRuleApplyConfiguration) WithFrom(values ...*NetworkPolicyPeerApplyConfiguration) *NetworkPolicyIngressRuleApplyConfiguration

WithFrom adds the given value to the From field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the From field.

func (*NetworkPolicyIngressRuleApplyConfiguration) WithPorts ¶

func (b *NetworkPolicyIngressRuleApplyConfiguration) WithPorts(values ...*NetworkPolicyPortApplyConfiguration) *NetworkPolicyIngressRuleApplyConfiguration

type NetworkPolicyPeerApplyConfiguration ¶

type NetworkPolicyPeerApplyConfiguration struct {
	// podSelector is a label selector which selects pods. This field follows standard label
	// selector semantics; if present but empty, it selects all pods.
	//
	// If namespaceSelector is also set, then the NetworkPolicyPeer as a whole selects
	// the pods matching podSelector in the Namespaces selected by NamespaceSelector.
	// Otherwise it selects the pods matching podSelector in the policy's own namespace.
	PodSelector *metav1.LabelSelectorApplyConfiguration `json:"podSelector,omitempty"`
	// namespaceSelector selects namespaces using cluster-scoped labels. This field follows
	// standard label selector semantics; if present but empty, it selects all namespaces.
	//
	// If podSelector is also set, then the NetworkPolicyPeer as a whole selects
	// the pods matching podSelector in the namespaces selected by namespaceSelector.
	// Otherwise it selects all pods in the namespaces selected by namespaceSelector.
	NamespaceSelector *metav1.LabelSelectorApplyConfiguration `json:"namespaceSelector,omitempty"`
	// ipBlock defines policy on a particular IPBlock. If this field is set then
	// neither of the other fields can be.
	IPBlock *IPBlockApplyConfiguration `json:"ipBlock,omitempty"`
}

NetworkPolicyPeerApplyConfiguration represents a declarative configuration of the NetworkPolicyPeer type for use with apply.

NetworkPolicyPeer describes a peer to allow traffic to/from. Only certain combinations of fields are allowed

func NetworkPolicyPeer ¶

func NetworkPolicyPeer() *NetworkPolicyPeerApplyConfiguration

NetworkPolicyPeerApplyConfiguration constructs a declarative configuration of the NetworkPolicyPeer type for use with apply.

func (*NetworkPolicyPeerApplyConfiguration) WithIPBlock ¶

func (b *NetworkPolicyPeerApplyConfiguration) WithIPBlock(value *IPBlockApplyConfiguration) *NetworkPolicyPeerApplyConfiguration

WithIPBlock sets the IPBlock field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the IPBlock field is set to the value of the last call.

func (*NetworkPolicyPeerApplyConfiguration) WithNamespaceSelector ¶

func (b *NetworkPolicyPeerApplyConfiguration) WithNamespaceSelector(value *metav1.LabelSelectorApplyConfiguration) *NetworkPolicyPeerApplyConfiguration

WithNamespaceSelector sets the NamespaceSelector field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the NamespaceSelector field is set to the value of the last call.

func (*NetworkPolicyPeerApplyConfiguration) WithPodSelector ¶

func (b *NetworkPolicyPeerApplyConfiguration) WithPodSelector(value *metav1.LabelSelectorApplyConfiguration) *NetworkPolicyPeerApplyConfiguration

WithPodSelector sets the PodSelector field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the PodSelector field is set to the value of the last call.

type NetworkPolicyPortApplyConfiguration ¶

type NetworkPolicyPortApplyConfiguration struct {
	// protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match.
	// If not specified, this field defaults to TCP.
	Protocol *corev1.Protocol `json:"protocol,omitempty"`
	// port represents the port on the given protocol. This can either be a numerical or named
	// port on a pod. If this field is not provided, this matches all port names and
	// numbers.
	// If present, only traffic on the specified protocol AND port will be matched.
	Port *intstr.IntOrString `json:"port,omitempty"`
	// endPort indicates that the range of ports from port to endPort if set, inclusive,
	// should be allowed by the policy. This field cannot be defined if the port field
	// is not defined or if the port field is defined as a named (string) port.
	// The endPort must be equal or greater than port.
	EndPort *int32 `json:"endPort,omitempty"`
}

NetworkPolicyPortApplyConfiguration represents a declarative configuration of the NetworkPolicyPort type for use with apply.

NetworkPolicyPort describes a port to allow traffic on

func NetworkPolicyPort ¶

func NetworkPolicyPort() *NetworkPolicyPortApplyConfiguration

NetworkPolicyPortApplyConfiguration constructs a declarative configuration of the NetworkPolicyPort type for use with apply.

func (*NetworkPolicyPortApplyConfiguration) WithEndPort ¶

func (b *NetworkPolicyPortApplyConfiguration) WithEndPort(value int32) *NetworkPolicyPortApplyConfiguration

WithEndPort sets the EndPort field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the EndPort field is set to the value of the last call.

func (*NetworkPolicyPortApplyConfiguration) WithPort ¶

func (b *NetworkPolicyPortApplyConfiguration) WithPort(value intstr.IntOrString) *NetworkPolicyPortApplyConfiguration

func (*NetworkPolicyPortApplyConfiguration) WithProtocol ¶

func (b *NetworkPolicyPortApplyConfiguration) WithProtocol(value corev1.Protocol) *NetworkPolicyPortApplyConfiguration

type NetworkPolicySpecApplyConfiguration ¶

type NetworkPolicySpecApplyConfiguration struct {
	// podSelector selects the pods to which this NetworkPolicy object applies.
	// The array of rules is applied to any pods selected by this field. An empty
	// selector matches all pods in the policy's namespace.
	// Multiple network policies can select the same set of pods. In this case,
	// the ingress rules for each are combined additively.
	// This field is optional. If it is not specified, it defaults to an empty selector.
	PodSelector *metav1.LabelSelectorApplyConfiguration `json:"podSelector,omitempty"`
	// ingress is a list of ingress rules to be applied to the selected pods.
	// Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod
	// (and cluster policy otherwise allows the traffic), OR if the traffic source is
	// the pod's local node, OR if the traffic matches at least one ingress rule
	// across all of the NetworkPolicy objects whose podSelector matches the pod. If
	// this field is empty then this NetworkPolicy does not allow any traffic (and serves
	// solely to ensure that the pods it selects are isolated by default)
	Ingress []NetworkPolicyIngressRuleApplyConfiguration `json:"ingress,omitempty"`
	// egress is a list of egress rules to be applied to the selected pods. Outgoing traffic
	// is allowed if there are no NetworkPolicies selecting the pod (and cluster policy
	// otherwise allows the traffic), OR if the traffic matches at least one egress rule
	// across all of the NetworkPolicy objects whose podSelector matches the pod. If
	// this field is empty then this NetworkPolicy limits all outgoing traffic (and serves
	// solely to ensure that the pods it selects are isolated by default).
	// This field is beta-level in 1.8
	Egress []NetworkPolicyEgressRuleApplyConfiguration `json:"egress,omitempty"`
	// policyTypes is a list of rule types that the NetworkPolicy relates to.
	// Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"].
	// If this field is not specified, it will default based on the existence of ingress or egress rules;
	// policies that contain an egress section are assumed to affect egress, and all policies
	// (whether or not they contain an ingress section) are assumed to affect ingress.
	// If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ].
	// Likewise, if you want to write a policy that specifies that no egress is allowed,
	// you must specify a policyTypes value that include "Egress" (since such a policy would not include
	// an egress section and would otherwise default to just [ "Ingress" ]).
	// This field is beta-level in 1.8
	PolicyTypes []networkingv1.PolicyType `json:"policyTypes,omitempty"`
}

NetworkPolicySpecApplyConfiguration represents a declarative configuration of the NetworkPolicySpec type for use with apply.

NetworkPolicySpec provides the specification of a NetworkPolicy

func NetworkPolicySpec ¶

func NetworkPolicySpec() *NetworkPolicySpecApplyConfiguration

NetworkPolicySpecApplyConfiguration constructs a declarative configuration of the NetworkPolicySpec type for use with apply.

func (*NetworkPolicySpecApplyConfiguration) WithEgress ¶

func (b *NetworkPolicySpecApplyConfiguration) WithEgress(values ...*NetworkPolicyEgressRuleApplyConfiguration) *NetworkPolicySpecApplyConfiguration

WithEgress adds the given value to the Egress field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Egress field.

func (*NetworkPolicySpecApplyConfiguration) WithIngress ¶

func (b *NetworkPolicySpecApplyConfiguration) WithIngress(values ...*NetworkPolicyIngressRuleApplyConfiguration) *NetworkPolicySpecApplyConfiguration

func (*NetworkPolicySpecApplyConfiguration) WithPodSelector ¶

func (b *NetworkPolicySpecApplyConfiguration) WithPodSelector(value *metav1.LabelSelectorApplyConfiguration) *NetworkPolicySpecApplyConfiguration

func (*NetworkPolicySpecApplyConfiguration) WithPolicyTypes ¶

func (b *NetworkPolicySpecApplyConfiguration) WithPolicyTypes(values ...networkingv1.PolicyType) *NetworkPolicySpecApplyConfiguration

WithPolicyTypes adds the given value to the PolicyTypes field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the PolicyTypes field.

type ParentReferenceApplyConfiguration ¶

type ParentReferenceApplyConfiguration struct {
	// Group is the group of the object being referenced.
	Group *string `json:"group,omitempty"`
	// Resource is the resource of the object being referenced.
	Resource *string `json:"resource,omitempty"`
	// Namespace is the namespace of the object being referenced.
	Namespace *string `json:"namespace,omitempty"`
	// Name is the name of the object being referenced.
	Name *string `json:"name,omitempty"`
}

ParentReferenceApplyConfiguration represents a declarative configuration of the ParentReference type for use with apply.

ParentReference describes a reference to a parent object.

func ParentReference ¶

func ParentReference() *ParentReferenceApplyConfiguration

ParentReferenceApplyConfiguration constructs a declarative configuration of the ParentReference type for use with apply.

func (*ParentReferenceApplyConfiguration) WithGroup ¶

func (b *ParentReferenceApplyConfiguration) WithGroup(value string) *ParentReferenceApplyConfiguration

WithGroup sets the Group field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Group field is set to the value of the last call.

func (*ParentReferenceApplyConfiguration) WithName ¶

func (b *ParentReferenceApplyConfiguration) WithName(value string) *ParentReferenceApplyConfiguration

func (*ParentReferenceApplyConfiguration) WithNamespace ¶

func (b *ParentReferenceApplyConfiguration) WithNamespace(value string) *ParentReferenceApplyConfiguration

func (*ParentReferenceApplyConfiguration) WithResource ¶

func (b *ParentReferenceApplyConfiguration) WithResource(value string) *ParentReferenceApplyConfiguration

type ServiceBackendPortApplyConfiguration ¶

type ServiceBackendPortApplyConfiguration struct {
	// name is the name of the port on the Service.
	// This is a mutually exclusive setting with "Number".
	Name *string `json:"name,omitempty"`
	// number is the numerical port number (e.g. 80) on the Service.
	// This is a mutually exclusive setting with "Name".
	Number *int32 `json:"number,omitempty"`
}

ServiceBackendPortApplyConfiguration represents a declarative configuration of the ServiceBackendPort type for use with apply.

ServiceBackendPort is the service port being referenced.

func ServiceBackendPort ¶

func ServiceBackendPort() *ServiceBackendPortApplyConfiguration

ServiceBackendPortApplyConfiguration constructs a declarative configuration of the ServiceBackendPort type for use with apply.

func (*ServiceBackendPortApplyConfiguration) WithName ¶

func (b *ServiceBackendPortApplyConfiguration) WithName(value string) *ServiceBackendPortApplyConfiguration

func (*ServiceBackendPortApplyConfiguration) WithNumber ¶

func (b *ServiceBackendPortApplyConfiguration) WithNumber(value int32) *ServiceBackendPortApplyConfiguration

WithNumber sets the Number field in the declarative configuration to the given value and returns the receiver, so that objects can be built by chaining "With" function invocations. If called multiple times, the Number field is set to the value of the last call.

type ServiceCIDRApplyConfiguration ¶

type ServiceCIDRApplyConfiguration struct {
	metav1.TypeMetaApplyConfiguration `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	*metav1.ObjectMetaApplyConfiguration `json:"metadata,omitempty"`
	// spec is the desired state of the ServiceCIDR.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	Spec *ServiceCIDRSpecApplyConfiguration `json:"spec,omitempty"`
	// status represents the current state of the ServiceCIDR.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	Status *ServiceCIDRStatusApplyConfiguration `json:"status,omitempty"`
}

ServiceCIDRApplyConfiguration represents a declarative configuration of the ServiceCIDR type for use with apply.

ServiceCIDR defines a range of IP addresses using CIDR format (e.g. 192.168.0.0/24 or 2001:db2::/64). This range is used to allocate ClusterIPs to Service objects.

func ExtractServiceCIDR ¶

func ExtractServiceCIDR(serviceCIDR *networkingv1.ServiceCIDR, fieldManager string) (*ServiceCIDRApplyConfiguration, error)

ExtractServiceCIDR extracts the applied configuration owned by fieldManager from serviceCIDR. If no managedFields are found in serviceCIDR for fieldManager, a ServiceCIDRApplyConfiguration is returned with only the Name, Namespace (if applicable), APIVersion and Kind populated. It is possible that no managed fields were found for because other field managers have taken ownership of all the fields previously owned by fieldManager, or because the fieldManager never owned fields any fields. serviceCIDR must be a unmodified ServiceCIDR API object that was retrieved from the Kubernetes API. ExtractServiceCIDR provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func ExtractServiceCIDRFrom ¶

func ExtractServiceCIDRFrom(serviceCIDR *networkingv1.ServiceCIDR, fieldManager string, subresource string) (*ServiceCIDRApplyConfiguration, error)

ExtractServiceCIDRFrom extracts the applied configuration owned by fieldManager from serviceCIDR for the specified subresource. Pass an empty string for subresource to extract the main resource. Common subresources include "status", "scale", etc. serviceCIDR must be a unmodified ServiceCIDR API object that was retrieved from the Kubernetes API. ExtractServiceCIDRFrom provides a way to perform a extract/modify-in-place/apply workflow. Note that an extracted apply configuration will contain fewer fields than what the fieldManager previously applied if another fieldManager has updated or force applied any of the previously applied fields.

func ExtractServiceCIDRStatus ¶

func ExtractServiceCIDRStatus(serviceCIDR *networkingv1.ServiceCIDR, fieldManager string) (*ServiceCIDRApplyConfiguration, error)

ExtractServiceCIDRStatus extracts the applied configuration owned by fieldManager from serviceCIDR for the status subresource.

func ServiceCIDR ¶

func ServiceCIDR(name string) *ServiceCIDRApplyConfiguration

ServiceCIDR constructs a declarative configuration of the ServiceCIDR type for use with apply.

func (*ServiceCIDRApplyConfiguration) GetAPIVersion ¶

func (b *ServiceCIDRApplyConfiguration) GetAPIVersion() *string

GetAPIVersion retrieves the value of the APIVersion field in the declarative configuration.

func (*ServiceCIDRApplyConfiguration) GetKind ¶

func (b *ServiceCIDRApplyConfiguration) GetKind() *string

GetKind retrieves the value of the Kind field in the declarative configuration.

func (*ServiceCIDRApplyConfiguration) GetName ¶

func (b *ServiceCIDRApplyConfiguration) GetName() *string

GetName retrieves the value of the Name field in the declarative configuration.

func (*ServiceCIDRApplyConfiguration) GetNamespace ¶

func (b *ServiceCIDRApplyConfiguration) GetNamespace() *string

GetNamespace retrieves the value of the Namespace field in the declarative configuration.

func (ServiceCIDRApplyConfiguration) IsApplyConfiguration ¶

func (b ServiceCIDRApplyConfiguration) IsApplyConfiguration()

func (*ServiceCIDRApplyConfiguration) WithAPIVersion ¶

func (b *ServiceCIDRApplyConfiguration) WithAPIVersion(value string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithAnnotations ¶

func (b *ServiceCIDRApplyConfiguration) WithAnnotations(entries map[string]string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithCreationTimestamp ¶

func (b *ServiceCIDRApplyConfiguration) WithCreationTimestamp(value apismetav1.Time) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithDeletionGracePeriodSeconds ¶

func (b *ServiceCIDRApplyConfiguration) WithDeletionGracePeriodSeconds(value int64) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithDeletionTimestamp ¶

func (b *ServiceCIDRApplyConfiguration) WithDeletionTimestamp(value apismetav1.Time) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithFinalizers ¶

func (b *ServiceCIDRApplyConfiguration) WithFinalizers(values ...string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithGenerateName ¶

func (b *ServiceCIDRApplyConfiguration) WithGenerateName(value string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithGeneration ¶

func (b *ServiceCIDRApplyConfiguration) WithGeneration(value int64) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithKind ¶

func (b *ServiceCIDRApplyConfiguration) WithKind(value string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithLabels ¶

func (b *ServiceCIDRApplyConfiguration) WithLabels(entries map[string]string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithName ¶

func (b *ServiceCIDRApplyConfiguration) WithName(value string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithNamespace ¶

func (b *ServiceCIDRApplyConfiguration) WithNamespace(value string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithOwnerReferences ¶

func (b *ServiceCIDRApplyConfiguration) WithOwnerReferences(values ...*metav1.OwnerReferenceApplyConfiguration) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithResourceVersion ¶

func (b *ServiceCIDRApplyConfiguration) WithResourceVersion(value string) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithSpec ¶

func (b *ServiceCIDRApplyConfiguration) WithSpec(value *ServiceCIDRSpecApplyConfiguration) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithStatus ¶

func (b *ServiceCIDRApplyConfiguration) WithStatus(value *ServiceCIDRStatusApplyConfiguration) *ServiceCIDRApplyConfiguration

func (*ServiceCIDRApplyConfiguration) WithUID ¶

func (b *ServiceCIDRApplyConfiguration) WithUID(value types.UID) *ServiceCIDRApplyConfiguration

type ServiceCIDRSpecApplyConfiguration ¶

type ServiceCIDRSpecApplyConfiguration struct {
	// CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64")
	// from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family.
	// This field is immutable.
	CIDRs []string `json:"cidrs,omitempty"`
}

ServiceCIDRSpecApplyConfiguration represents a declarative configuration of the ServiceCIDRSpec type for use with apply.

ServiceCIDRSpec define the CIDRs the user wants to use for allocating ClusterIPs for Services.

func ServiceCIDRSpec ¶

func ServiceCIDRSpec() *ServiceCIDRSpecApplyConfiguration

ServiceCIDRSpecApplyConfiguration constructs a declarative configuration of the ServiceCIDRSpec type for use with apply.

func (*ServiceCIDRSpecApplyConfiguration) WithCIDRs ¶

func (b *ServiceCIDRSpecApplyConfiguration) WithCIDRs(values ...string) *ServiceCIDRSpecApplyConfiguration

WithCIDRs adds the given value to the CIDRs field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the CIDRs field.

type ServiceCIDRStatusApplyConfiguration ¶

type ServiceCIDRStatusApplyConfiguration struct {
	// conditions holds an array of metav1.Condition that describe the state of the ServiceCIDR.
	// Current service state
	Conditions []metav1.ConditionApplyConfiguration `json:"conditions,omitempty"`
}

ServiceCIDRStatusApplyConfiguration represents a declarative configuration of the ServiceCIDRStatus type for use with apply.

ServiceCIDRStatus describes the current state of the ServiceCIDR.

func ServiceCIDRStatus ¶

func ServiceCIDRStatus() *ServiceCIDRStatusApplyConfiguration

ServiceCIDRStatusApplyConfiguration constructs a declarative configuration of the ServiceCIDRStatus type for use with apply.

func (*ServiceCIDRStatusApplyConfiguration) WithConditions ¶

func (b *ServiceCIDRStatusApplyConfiguration) WithConditions(values ...*metav1.ConditionApplyConfiguration) *ServiceCIDRStatusApplyConfiguration

WithConditions adds the given value to the Conditions field in the declarative configuration and returns the receiver, so that objects can be build by chaining "With" function invocations. If called multiple times, values provided by each call will be appended to the Conditions field.

Source Files ¶

httpingresspath.go httpingressrulevalue.go ingress.go ingressbackend.go ingressclass.go ingressclassparametersreference.go ingressclassspec.go ingressloadbalanceringress.go ingressloadbalancerstatus.go ingressportstatus.go ingressrule.go ingressrulevalue.go ingressservicebackend.go ingressspec.go ingressstatus.go ingresstls.go ipaddress.go ipaddressspec.go ipblock.go networkpolicy.go networkpolicyegressrule.go networkpolicyingressrule.go networkpolicypeer.go networkpolicyport.go networkpolicyspec.go parentreference.go servicebackendport.go servicecidr.go servicecidrspec.go servicecidrstatus.go

Version: v0.35.0-rc.1
Published: Dec 9, 2025
Platform: linux/amd64
Imports: 9 packages
Last checked: 25 minutes ago –

Tools for package owners.

?	: This menu
/	: Search site
f	: Jump to identifier
g then g	: Go to top of page
g then b	: Go to end of page
G	: Go to end of page
g then i	: Go to index
g then e	: Go to examples