const (
	// NetworkDefault is a platform-independent alias to choose the platform-specific default network stack.
	NetworkDefault = "default"
	// NetworkHost is the name of the predefined network used when the NetworkMode host is selected (only available on Linux)
	NetworkHost = "host"
	// NetworkNone is the name of the predefined network used when the NetworkMode none is selected (available on both Linux and Windows)
	NetworkNone = "none"
	// NetworkBridge is the name of the default network on Linux
	NetworkBridge = "bridge"
	// NetworkNat is the name of the default network on Windows
	NetworkNat = "nat"
)

type Address struct {
	Addr      string
	PrefixLen int
}

type ConfigReference struct {
	Network string
}

type ConnectOptions struct {
	Container      string
	EndpointConfig *EndpointSettings `json:",omitempty"`
}

type CreateOptions struct {
	Driver     string            // Driver is the driver-name used to create the network (e.g. `bridge`, `overlay`)
	Scope      string            // Scope describes the level at which the network exists (e.g. `swarm` for cluster-wide or `local` for machine level).
	EnableIPv4 *bool             `json:",omitempty"` // EnableIPv4 represents whether to enable IPv4.
	EnableIPv6 *bool             `json:",omitempty"` // EnableIPv6 represents whether to enable IPv6.
	IPAM       *IPAM             // IPAM is the network's IP Address Management.
	Internal   bool              // Internal represents if the network is used internal only.
	Attachable bool              // Attachable represents if the global scope is manually attachable by regular containers from workers in swarm mode.
	Ingress    bool              // Ingress indicates the network is providing the routing-mesh for the swarm cluster.
	ConfigOnly bool              // ConfigOnly creates a config-only network. Config-only networks are place-holder networks for network configurations to be used by other networks. ConfigOnly networks cannot be used directly to run containers or services.
	ConfigFrom *ConfigReference  // ConfigFrom specifies the source which will provide the configuration for this network. The specified network must be a config-only network; see [CreateOptions.ConfigOnly].
	Options    map[string]string // Options specifies the network-specific options to use for when creating the network.
	Labels     map[string]string // Labels holds metadata specific to the network being created.
}

type CreateRequest struct {
	CreateOptions
	Name string // Name is the requested name of the network.

	// Deprecated: CheckDuplicate is deprecated since API v1.44, but it defaults to true when sent by the client
	// package to older daemons.
	CheckDuplicate *bool `json:",omitempty"`
}

type CreateResponse struct {

	// The ID of the created network.
	// Required: true
	ID string `json:"Id"`

	// Warnings encountered when creating the container
	// Required: true
	Warning string `json:"Warning"`
}

type DisconnectOptions struct {
	Container string
	Force     bool
}

type EndpointIPAMConfig struct {
	IPv4Address  string   `json:",omitempty"`
	IPv6Address  string   `json:",omitempty"`
	LinkLocalIPs []string `json:",omitempty"`
}

type EndpointResource struct {
	Name        string
	EndpointID  string
	MacAddress  string
	IPv4Address string
	IPv6Address string
}

type EndpointSettings struct {
	// Configurations
	IPAMConfig *EndpointIPAMConfig
	Links      []string
	Aliases    []string // Aliases holds the list of extra, user-specified DNS names for this endpoint.
	// MacAddress may be used to specify a MAC address when the container is created.
	// Once the container is running, it becomes operational data (it may contain a
	// generated address).
	MacAddress string
	DriverOpts map[string]string

	// GwPriority determines which endpoint will provide the default gateway
	// for the container. The endpoint with the highest priority will be used.
	// If multiple endpoints have the same priority, they are lexicographically
	// sorted based on their network name, and the one that sorts first is picked.
	GwPriority int
	// Operational data
	NetworkID           string
	EndpointID          string
	Gateway             string
	IPAddress           string
	IPPrefixLen         int
	IPv6Gateway         string
	GlobalIPv6Address   string
	GlobalIPv6PrefixLen int
	// DNSNames holds all the (non fully qualified) DNS names associated to this endpoint. First entry is used to
	// generate PTR records.
	DNSNames []string
}

type IPAM struct {
	Driver  string
	Options map[string]string // Per network IPAM driver options
	Config  []IPAMConfig
}

type IPAMConfig struct {
	Subnet     string            `json:",omitempty"`
	IPRange    string            `json:",omitempty"`
	Gateway    string            `json:",omitempty"`
	AuxAddress map[string]string `json:"AuxiliaryAddresses,omitempty"`
}

type Inspect struct {
	Name       string                      // Name is the name of the network
	ID         string                      `json:"Id"` // ID uniquely identifies a network on a single machine
	Created    time.Time                   // Created is the time the network created
	Scope      string                      // Scope describes the level at which the network exists (e.g. `swarm` for cluster-wide or `local` for machine level)
	Driver     string                      // Driver is the Driver name used to create the network (e.g. `bridge`, `overlay`)
	EnableIPv4 bool                        // EnableIPv4 represents whether IPv4 is enabled
	EnableIPv6 bool                        // EnableIPv6 represents whether IPv6 is enabled
	IPAM       IPAM                        // IPAM is the network's IP Address Management
	Internal   bool                        // Internal represents if the network is used internal only
	Attachable bool                        // Attachable represents if the global scope is manually attachable by regular containers from workers in swarm mode.
	Ingress    bool                        // Ingress indicates the network is providing the routing-mesh for the swarm cluster.
	ConfigFrom ConfigReference             // ConfigFrom specifies the source which will provide the configuration for this network.
	ConfigOnly bool                        // ConfigOnly networks are place-holder networks for network configurations to be used by other networks. ConfigOnly networks cannot be used directly to run containers or services.
	Containers map[string]EndpointResource // Containers contains endpoints belonging to the network
	Options    map[string]string           // Options holds the network specific options to use for when creating the network
	Labels     map[string]string           // Labels holds metadata specific to the network being created
	Peers      []PeerInfo                  `json:",omitempty"` // List of peer nodes for an overlay network
	Services   map[string]ServiceInfo      `json:",omitempty"`
}

type InspectOptions struct {
	Scope   string
	Verbose bool
}

type ListOptions struct {
	Filters filters.Args
}

type NetworkSubnet interface {
	// Contains checks whether the NetworkSubnet contains [addr].
	Contains(addr net.IP) bool
	// IsStatic checks whether the subnet was statically allocated (ie. user-defined).
	IsStatic() bool
}

type NetworkingConfig struct {
	EndpointsConfig map[string]*EndpointSettings // Endpoint configs for each connecting network
}

type PeerInfo struct {
	Name string
	IP   string
}

type PruneReport struct {
	NetworksDeleted []string
}

type ServiceInfo struct {
	VIP          string
	Ports        []string
	LocalLBIndex int
	Tasks        []Task
}

type Summary = Inspect

type Task struct {
	Name       string
	EndpointID string
	EndpointIP string
	Info       map[string]string
}