type AccessDeniedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type AccessPropertyValue string

const (
	AccessPropertyValueAllow AccessPropertyValue = "ALLOW"
	AccessPropertyValueDeny  AccessPropertyValue = "DENY"
)

type AccountModification struct {

	// The IP address range, specified as an IPv4 CIDR block, for the management
	// network interface used for the account.
	DedicatedTenancyManagementCidrRange *string

	// The status of BYOL (whether BYOL is being enabled or disabled).
	DedicatedTenancySupport DedicatedTenancySupportResultEnum

	// The error code that is returned if the configuration of BYOL cannot be modified.
	ErrorCode *string

	// The text of the error message that is returned if the configuration of BYOL
	// cannot be modified.
	ErrorMessage *string

	// The state of the modification to the configuration of BYOL.
	ModificationState DedicatedTenancyModificationStateEnum

	// The timestamp when the modification of the BYOL configuration was started.
	StartTime *time.Time
	// contains filtered or unexported fields
}

type Application string

const (
	ApplicationMicrosoftOffice2016 Application = "Microsoft_Office_2016"
	ApplicationMicrosoftOffice2019 Application = "Microsoft_Office_2019"
)

type AssociationStatus string

const (
	AssociationStatusNotAssociated               AssociationStatus = "NOT_ASSOCIATED"
	AssociationStatusAssociatedWithOwnerAccount  AssociationStatus = "ASSOCIATED_WITH_OWNER_ACCOUNT"
	AssociationStatusAssociatedWithSharedAccount AssociationStatus = "ASSOCIATED_WITH_SHARED_ACCOUNT"
	AssociationStatusPendingAssociation          AssociationStatus = "PENDING_ASSOCIATION"
	AssociationStatusPendingDisassociation       AssociationStatus = "PENDING_DISASSOCIATION"
)

type BundleType string

const (
	BundleTypeRegular BundleType = "REGULAR"
	BundleTypeStandby BundleType = "STANDBY"
)

type CertificateBasedAuthProperties struct {

	// The Amazon Resource Name (ARN) of the Amazon Web Services Certificate Manager
	// Private CA resource.
	CertificateAuthorityArn *string

	// The status of the certificate-based authentication properties.
	Status CertificateBasedAuthStatusEnum
	// contains filtered or unexported fields
}

type CertificateBasedAuthStatusEnum string

const (
	CertificateBasedAuthStatusEnumDisabled CertificateBasedAuthStatusEnum = "DISABLED"
	CertificateBasedAuthStatusEnumEnabled  CertificateBasedAuthStatusEnum = "ENABLED"
)

type ClientDeviceType string

const (
	ClientDeviceTypeDeviceTypeWindows ClientDeviceType = "DeviceTypeWindows"
	ClientDeviceTypeDeviceTypeOsx     ClientDeviceType = "DeviceTypeOsx"
	ClientDeviceTypeDeviceTypeAndroid ClientDeviceType = "DeviceTypeAndroid"
	ClientDeviceTypeDeviceTypeIos     ClientDeviceType = "DeviceTypeIos"
	ClientDeviceTypeDeviceTypeLinux   ClientDeviceType = "DeviceTypeLinux"
	ClientDeviceTypeDeviceTypeWeb     ClientDeviceType = "DeviceTypeWeb"
)

type ClientProperties struct {

	// Specifies whether users can upload diagnostic log files of Amazon WorkSpaces
	// client directly to WorkSpaces to troubleshoot issues when using the WorkSpaces
	// client. When enabled, the log files will be sent to WorkSpaces automatically and
	// will be applied to all users in the specified directory.
	LogUploadEnabled LogUploadEnum

	// Specifies whether users can cache their credentials on the Amazon WorkSpaces
	// client. When enabled, users can choose to reconnect to their WorkSpaces without
	// re-entering their credentials.
	ReconnectEnabled ReconnectEnum
	// contains filtered or unexported fields
}

type ClientPropertiesResult struct {

	// Information about the Amazon WorkSpaces client.
	ClientProperties *ClientProperties

	// The resource identifier, in the form of a directory ID.
	ResourceId *string
	// contains filtered or unexported fields
}

type Compute string

const (
	ComputeValue           Compute = "VALUE"
	ComputeStandard        Compute = "STANDARD"
	ComputePerformance     Compute = "PERFORMANCE"
	ComputePower           Compute = "POWER"
	ComputeGraphics        Compute = "GRAPHICS"
	ComputePowerpro        Compute = "POWERPRO"
	ComputeGraphicspro     Compute = "GRAPHICSPRO"
	ComputeGraphicsG4dn    Compute = "GRAPHICS_G4DN"
	ComputeGraphicsproG4dn Compute = "GRAPHICSPRO_G4DN"
)

type ComputeType struct {

	// The compute type.
	Name Compute
	// contains filtered or unexported fields
}

type ConnectClientAddIn struct {

	// The client add-in identifier.
	AddInId *string

	// The name of the client add in.
	Name *string

	// The directory identifier for which the client add-in is configured.
	ResourceId *string

	// The endpoint URL of the client add-in.
	URL *string
	// contains filtered or unexported fields
}

type ConnectionAlias struct {

	// The identifier of the connection alias.
	AliasId *string

	// The association status of the connection alias.
	Associations []ConnectionAliasAssociation

	// The connection string specified for the connection alias. The connection string
	// must be in the form of a fully qualified domain name (FQDN), such as
	// www.example.com.
	ConnectionString *string

	// The identifier of the Amazon Web Services account that owns the connection
	// alias.
	OwnerAccountId *string

	// The current state of the connection alias.
	State ConnectionAliasState
	// contains filtered or unexported fields
}

type ConnectionAliasAssociation struct {

	// The identifier of the Amazon Web Services account that associated the connection
	// alias with a directory.
	AssociatedAccountId *string

	// The association status of the connection alias.
	AssociationStatus AssociationStatus

	// The identifier of the connection alias association. You use the connection
	// identifier in the DNS TXT record when you're configuring your DNS routing
	// policies.
	ConnectionIdentifier *string

	// The identifier of the directory associated with a connection alias.
	ResourceId *string
	// contains filtered or unexported fields
}

type ConnectionAliasPermission struct {

	// Indicates whether the specified Amazon Web Services account is allowed to
	// associate the connection alias with a directory.
	//
	// This member is required.
	AllowAssociation *bool

	// The identifier of the Amazon Web Services account that the connection alias is
	// shared with.
	//
	// This member is required.
	SharedAccountId *string
	// contains filtered or unexported fields
}

type ConnectionAliasState string

const (
	ConnectionAliasStateCreating ConnectionAliasState = "CREATING"
	ConnectionAliasStateCreated  ConnectionAliasState = "CREATED"
	ConnectionAliasStateDeleting ConnectionAliasState = "DELETING"
)

type ConnectionState string

const (
	ConnectionStateConnected    ConnectionState = "CONNECTED"
	ConnectionStateDisconnected ConnectionState = "DISCONNECTED"
	ConnectionStateUnknown      ConnectionState = "UNKNOWN"
)

type DedicatedTenancyModificationStateEnum string

const (
	DedicatedTenancyModificationStateEnumPending   DedicatedTenancyModificationStateEnum = "PENDING"
	DedicatedTenancyModificationStateEnumCompleted DedicatedTenancyModificationStateEnum = "COMPLETED"
	DedicatedTenancyModificationStateEnumFailed    DedicatedTenancyModificationStateEnum = "FAILED"
)

type DedicatedTenancySupportEnum string

const (
	DedicatedTenancySupportEnumEnabled DedicatedTenancySupportEnum = "ENABLED"
)

type DedicatedTenancySupportResultEnum string

const (
	DedicatedTenancySupportResultEnumEnabled  DedicatedTenancySupportResultEnum = "ENABLED"
	DedicatedTenancySupportResultEnumDisabled DedicatedTenancySupportResultEnum = "DISABLED"
)

type DefaultClientBrandingAttributes struct {

	// The forgotten password link. This is the web address that users can go to if
	// they forget the password for their WorkSpace.
	ForgotPasswordLink *string

	// The login message. Specified as a key value pair, in which the key is a locale
	// and the value is the localized message for that locale. The only key supported
	// is en_US. The HTML tags supported include the following: a, b, blockquote, br,
	// cite, code, dd, dl, dt, div, em, i, li, ol, p, pre, q, small, span, strike,
	// strong, sub, sup, u, ul.
	LoginMessage map[string]string

	// The logo. The only image format accepted is a binary data object that is
	// converted from a .png file.
	LogoUrl *string

	// The support email. The company's customer support email address.
	//
	// * In each
	// platform type, the SupportEmail and SupportLink parameters are mutually
	// exclusive. You can specify one parameter for each platform type, but not
	// both.
	//
	// * The default email is workspaces-feedback@amazon.com.
	SupportEmail *string

	// The support link. The link for the company's customer support page for their
	// WorkSpace.
	//
	// * In each platform type, the SupportEmail and SupportLink parameters
	// are mutually exclusive.You can specify one parameter for each platform type, but
	// not both.
	//
	// * The default support link is workspaces-feedback@amazon.com.
	SupportLink *string
	// contains filtered or unexported fields
}

type DefaultImportClientBrandingAttributes struct {

	// The forgotten password link. This is the web address that users can go to if
	// they forget the password for their WorkSpace.
	ForgotPasswordLink *string

	// The login message. Specified as a key value pair, in which the key is a locale
	// and the value is the localized message for that locale. The only key supported
	// is en_US. The HTML tags supported include the following: a, b, blockquote, br,
	// cite, code, dd, dl, dt, div, em, i, li, ol, p, pre, q, small, span, strike,
	// strong, sub, sup, u, ul.
	LoginMessage map[string]string

	// The logo. The only image format accepted is a binary data object that is
	// converted from a .png file.
	Logo []byte

	// The support email. The company's customer support email address.
	//
	// * In each
	// platform type, the SupportEmail and SupportLink parameters are mutually
	// exclusive. You can specify one parameter for each platform type, but not
	// both.
	//
	// * The default email is workspaces-feedback@amazon.com.
	SupportEmail *string

	// The support link. The link for the company's customer support page for their
	// WorkSpace.
	//
	// * In each platform type, the SupportEmail and SupportLink parameters
	// are mutually exclusive. You can specify one parameter for each platform type,
	// but not both.
	//
	// * The default support link is workspaces-feedback@amazon.com.
	SupportLink *string
	// contains filtered or unexported fields
}

type DefaultWorkspaceCreationProperties struct {

	// The identifier of the default security group to apply to WorkSpaces when they
	// are created. For more information, see  Security Groups for Your WorkSpaces
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/amazon-workspaces-security-groups.html).
	CustomSecurityGroupId *string

	// The organizational unit (OU) in the directory for the WorkSpace machine
	// accounts.
	DefaultOu *string

	// Specifies whether to automatically assign an Elastic public IP address to
	// WorkSpaces in this directory by default. If enabled, the Elastic public IP
	// address allows outbound internet access from your WorkSpaces when you’re using
	// an internet gateway in the Amazon VPC in which your WorkSpaces are located. If
	// you're using a Network Address Translation (NAT) gateway for outbound internet
	// access from your VPC, or if your WorkSpaces are in public subnets and you
	// manually assign them Elastic IP addresses, you should disable this setting. This
	// setting applies to new WorkSpaces that you launch or to existing WorkSpaces that
	// you rebuild. For more information, see  Configure a VPC for Amazon WorkSpaces
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/amazon-workspaces-vpc.html).
	EnableInternetAccess *bool

	// Specifies whether maintenance mode is enabled for WorkSpaces. For more
	// information, see WorkSpace Maintenance
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/workspace-maintenance.html).
	EnableMaintenanceMode *bool

	// Specifies whether the directory is enabled for Amazon WorkDocs.
	EnableWorkDocs *bool

	// Specifies whether WorkSpace users are local administrators on their WorkSpaces.
	UserEnabledAsLocalAdministrator *bool
	// contains filtered or unexported fields
}

type DeletableCertificateBasedAuthProperty string

const (
	DeletableCertificateBasedAuthPropertyCertificateBasedAuthPropertiesCertificateAuthorityArn DeletableCertificateBasedAuthProperty = "CERTIFICATE_BASED_AUTH_PROPERTIES_CERTIFICATE_AUTHORITY_ARN"
)

type DeletableSamlProperty string

const (
	DeletableSamlPropertySamlPropertiesUserAccessUrl           DeletableSamlProperty = "SAML_PROPERTIES_USER_ACCESS_URL"
	DeletableSamlPropertySamlPropertiesRelayStateParameterName DeletableSamlProperty = "SAML_PROPERTIES_RELAY_STATE_PARAMETER_NAME"
)

type FailedCreateStandbyWorkspacesRequest struct {

	// The error code that is returned if the standby WorkSpace could not be created.
	ErrorCode *string

	// The text of the error message that is returned if the standby WorkSpace could
	// not be created.
	ErrorMessage *string

	// Information about the standby WorkSpace that could not be created.
	StandbyWorkspaceRequest *StandbyWorkspace
	// contains filtered or unexported fields
}

type FailedCreateWorkspaceRequest struct {

	// The error code that is returned if the WorkSpace cannot be created.
	ErrorCode *string

	// The text of the error message that is returned if the WorkSpace cannot be
	// created.
	ErrorMessage *string

	// Information about the WorkSpace.
	WorkspaceRequest *WorkspaceRequest
	// contains filtered or unexported fields
}

type FailedWorkspaceChangeRequest struct {

	// The error code that is returned if the WorkSpace cannot be rebooted.
	ErrorCode *string

	// The text of the error message that is returned if the WorkSpace cannot be
	// rebooted.
	ErrorMessage *string

	// The identifier of the WorkSpace.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type ImagePermission struct {

	// The identifier of the Amazon Web Services account that an image has been shared
	// with.
	SharedAccountId *string
	// contains filtered or unexported fields
}

type ImageType string

const (
	ImageTypeOwned  ImageType = "OWNED"
	ImageTypeShared ImageType = "SHARED"
)

type InvalidParameterValuesException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidResourceStateException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type IosClientBrandingAttributes struct {

	// The forgotten password link. This is the web address that users can go to if
	// they forget the password for their WorkSpace.
	ForgotPasswordLink *string

	// The login message. Specified as a key value pair, in which the key is a locale
	// and the value is the localized message for that locale. The only key supported
	// is en_US. The HTML tags supported include the following: a, b, blockquote, br,
	// cite, code, dd, dl, dt, div, em, i, li, ol, p, pre, q, small, span, strike,
	// strong, sub, sup, u, ul.
	LoginMessage map[string]string

	// The @2x version of the logo. This is the higher resolution display that offers a
	// scale factor of 2.0 (or @2x). The only image format accepted is a binary data
	// object that is converted from a .png file. For more information about iOS image
	// size and resolution, see Image Size and Resolution
	// (https://developer.apple.com/design/human-interface-guidelines/ios/icons-and-images/image-size-and-resolution/)
	// in the Apple Human Interface Guidelines.
	Logo2xUrl *string

	// The @3x version of the logo. This is the higher resolution display that offers a
	// scale factor of 3.0 (or @3x).The only image format accepted is a binary data
	// object that is converted from a .png file. For more information about iOS image
	// size and resolution, see Image Size and Resolution
	// (https://developer.apple.com/design/human-interface-guidelines/ios/icons-and-images/image-size-and-resolution/)
	// in the Apple Human Interface Guidelines.
	Logo3xUrl *string

	// The logo. This is the standard-resolution display that has a 1:1 pixel density
	// (or @1x), where one pixel is equal to one point. The only image format accepted
	// is a binary data object that is converted from a .png file.
	LogoUrl *string

	// The support email. The company's customer support email address.
	//
	// * In each
	// platform type, the SupportEmail and SupportLink parameters are mutually
	// exclusive. You can specify one parameter for each platform type, but not
	// both.
	//
	// * The default email is workspaces-feedback@amazon.com.
	SupportEmail *string

	// The support link. The link for the company's customer support page for their
	// WorkSpace.
	//
	// * In each platform type, the SupportEmail and SupportLink parameters
	// are mutually exclusive. You can specify one parameter for each platform type,
	// but not both.
	//
	// * The default support link is workspaces-feedback@amazon.com.
	SupportLink *string
	// contains filtered or unexported fields
}

type IosImportClientBrandingAttributes struct {

	// The forgotten password link. This is the web address that users can go to if
	// they forget the password for their WorkSpace.
	ForgotPasswordLink *string

	// The login message. Specified as a key value pair, in which the key is a locale
	// and the value is the localized message for that locale. The only key supported
	// is en_US. The HTML tags supported include the following: a, b, blockquote, br,
	// cite, code, dd, dl, dt, div, em, i, li, ol, p, pre, q, small, span, strike,
	// strong, sub, sup, u, ul.
	LoginMessage map[string]string

	// The logo. This is the standard-resolution display that has a 1:1 pixel density
	// (or @1x), where one pixel is equal to one point. The only image format accepted
	// is a binary data object that is converted from a .png file.
	Logo []byte

	// The @2x version of the logo. This is the higher resolution display that offers a
	// scale factor of 2.0 (or @2x). The only image format accepted is a binary data
	// object that is converted from a .png file. For more information about iOS image
	// size and resolution, see Image Size and Resolution
	// (https://developer.apple.com/design/human-interface-guidelines/ios/icons-and-images/image-size-and-resolution/)
	// in the Apple Human Interface Guidelines.
	Logo2x []byte

	// The @3x version of the logo. This is the higher resolution display that offers a
	// scale factor of 3.0 (or @3x). The only image format accepted is a binary data
	// object that is converted from a .png file. For more information about iOS image
	// size and resolution, see Image Size and Resolution
	// (https://developer.apple.com/design/human-interface-guidelines/ios/icons-and-images/image-size-and-resolution/)
	// in the Apple Human Interface Guidelines.
	Logo3x []byte

	// The support email. The company's customer support email address.
	//
	// * In each
	// platform type, the SupportEmail and SupportLink parameters are mutually
	// exclusive. You can specify one parameter for each platform type, but not
	// both.
	//
	// * The default email is workspaces-feedback@amazon.com.
	SupportEmail *string

	// The support link. The link for the company's customer support page for their
	// WorkSpace.
	//
	// * In each platform type, the SupportEmail and SupportLink parameters
	// are mutually exclusive. You can specify one parameter for each platform type,
	// but not both.
	//
	// * The default support link is workspaces-feedback@amazon.com.
	SupportLink *string
	// contains filtered or unexported fields
}

type IpRuleItem struct {

	// The IP address range, in CIDR notation.
	IpRule *string

	// The description.
	RuleDesc *string
	// contains filtered or unexported fields
}

type LogUploadEnum string

const (
	LogUploadEnumEnabled  LogUploadEnum = "ENABLED"
	LogUploadEnumDisabled LogUploadEnum = "DISABLED"
)

type ModificationResourceEnum string

const (
	ModificationResourceEnumRootVolume  ModificationResourceEnum = "ROOT_VOLUME"
	ModificationResourceEnumUserVolume  ModificationResourceEnum = "USER_VOLUME"
	ModificationResourceEnumComputeType ModificationResourceEnum = "COMPUTE_TYPE"
)

type ModificationState struct {

	// The resource.
	Resource ModificationResourceEnum

	// The modification state.
	State ModificationStateEnum
	// contains filtered or unexported fields
}

type ModificationStateEnum string

const (
	ModificationStateEnumUpdateInitiated  ModificationStateEnum = "UPDATE_INITIATED"
	ModificationStateEnumUpdateInProgress ModificationStateEnum = "UPDATE_IN_PROGRESS"
)

type OperatingSystem struct {

	// The operating system.
	Type OperatingSystemType
	// contains filtered or unexported fields
}

type OperatingSystemType string

const (
	OperatingSystemTypeWindows OperatingSystemType = "WINDOWS"
	OperatingSystemTypeLinux   OperatingSystemType = "LINUX"
)

type OperationInProgressException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type OperationNotSupportedException struct {
	Message *string

	ErrorCodeOverride *string

	Reason *string
	// contains filtered or unexported fields
}

type PendingCreateStandbyWorkspacesRequest struct {

	// The identifier of the directory for the standby WorkSpace.
	DirectoryId *string

	// The operational state of the standby WorkSpace.
	State WorkspaceState

	// Describes the standby WorkSpace that was created. Because this operation is
	// asynchronous, the identifier returned is not immediately available for use with
	// other operations. For example, if you call  DescribeWorkspaces
	// (https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeWorkspaces.html)
	// before the WorkSpace is created, the information returned can be incomplete.
	UserName *string

	// The identifier of the standby WorkSpace.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type Protocol string

const (
	ProtocolPcoip Protocol = "PCOIP"
	ProtocolWsp   Protocol = "WSP"
)

type RebootRequest struct {

	// The identifier of the WorkSpace.
	//
	// This member is required.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type RebuildRequest struct {

	// The identifier of the WorkSpace.
	//
	// This member is required.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type ReconnectEnum string

const (
	ReconnectEnumEnabled  ReconnectEnum = "ENABLED"
	ReconnectEnumDisabled ReconnectEnum = "DISABLED"
)

type RelatedWorkspaceProperties struct {

	// The Region of the related WorkSpace.
	Region *string

	// Indicates the state of the WorkSpace.
	State WorkspaceState

	// Indicates the type of WorkSpace.
	Type StandbyWorkspaceRelationshipType

	// The identifier of the related WorkSpace.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type ResourceAlreadyExistsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ResourceAssociatedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ResourceCreationFailedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ResourceLimitExceededException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ResourceNotFoundException struct {
	Message *string

	ErrorCodeOverride *string

	ResourceId *string
	// contains filtered or unexported fields
}

type ResourceUnavailableException struct {
	Message *string

	ErrorCodeOverride *string

	ResourceId *string
	// contains filtered or unexported fields
}

type RootStorage struct {

	// The size of the root volume.
	Capacity *string
	// contains filtered or unexported fields
}

type RunningMode string

const (
	RunningModeAutoStop RunningMode = "AUTO_STOP"
	RunningModeAlwaysOn RunningMode = "ALWAYS_ON"
	RunningModeManual   RunningMode = "MANUAL"
)

type SamlProperties struct {

	// The relay state parameter name supported by the SAML 2.0 identity provider
	// (IdP). When the end user is redirected to the user access URL from the
	// WorkSpaces client application, this relay state parameter name is appended as a
	// query parameter to the URL along with the relay state endpoint to return the
	// user to the client application session. To use SAML 2.0 authentication with
	// WorkSpaces, the IdP must support IdP-initiated deep linking for the relay state
	// URL. Consult your IdP documentation for more information.
	RelayStateParameterName *string

	// Indicates the status of SAML 2.0 authentication. These statuses include the
	// following.
	//
	// * If the setting is DISABLED, end users will be directed to login
	// with their directory credentials.
	//
	// * If the setting is ENABLED, end users will
	// be directed to login via the user access URL. Users attempting to connect to
	// WorkSpaces from a client application that does not support SAML 2.0
	// authentication will not be able to connect.
	//
	// * If the setting is
	// ENABLED_WITH_DIRECTORY_LOGIN_FALLBACK, end users will be directed to login via
	// the user access URL on supported client applications, but will not prevent
	// clients that do not support SAML 2.0 authentication from connecting as if SAML
	// 2.0 authentication was disabled.
	Status SamlStatusEnum

	// The SAML 2.0 identity provider (IdP) user access URL is the URL a user would
	// navigate to in their web browser in order to federate from the IdP and directly
	// access the application, without any SAML 2.0 service provider (SP) bindings.
	UserAccessUrl *string
	// contains filtered or unexported fields
}

type SamlStatusEnum string

const (
	SamlStatusEnumDisabled                          SamlStatusEnum = "DISABLED"
	SamlStatusEnumEnabled                           SamlStatusEnum = "ENABLED"
	SamlStatusEnumEnabledWithDirectoryLoginFallback SamlStatusEnum = "ENABLED_WITH_DIRECTORY_LOGIN_FALLBACK"
)

type SelfservicePermissions struct {

	// Specifies whether users can change the compute type (bundle) for their
	// WorkSpace.
	ChangeComputeType ReconnectEnum

	// Specifies whether users can increase the volume size of the drives on their
	// WorkSpace.
	IncreaseVolumeSize ReconnectEnum

	// Specifies whether users can rebuild the operating system of a WorkSpace to its
	// original state.
	RebuildWorkspace ReconnectEnum

	// Specifies whether users can restart their WorkSpace.
	RestartWorkspace ReconnectEnum

	// Specifies whether users can switch the running mode of their WorkSpace.
	SwitchRunningMode ReconnectEnum
	// contains filtered or unexported fields
}

type Snapshot struct {

	// The time when the snapshot was created.
	SnapshotTime *time.Time
	// contains filtered or unexported fields
}

type StandbyWorkspace struct {

	// The identifier of the directory for the standby WorkSpace.
	//
	// This member is required.
	DirectoryId *string

	// The identifier of the standby WorkSpace.
	//
	// This member is required.
	PrimaryWorkspaceId *string

	// The tags associated with the standby WorkSpace.
	Tags []Tag

	// The volume encryption key of the standby WorkSpace.
	VolumeEncryptionKey *string
	// contains filtered or unexported fields
}

type StandbyWorkspaceRelationshipType string

const (
	StandbyWorkspaceRelationshipTypePrimary StandbyWorkspaceRelationshipType = "PRIMARY"
	StandbyWorkspaceRelationshipTypeStandby StandbyWorkspaceRelationshipType = "STANDBY"
)

type StartRequest struct {

	// The identifier of the WorkSpace.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type StopRequest struct {

	// The identifier of the WorkSpace.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type Tag struct {

	// The key of the tag.
	//
	// This member is required.
	Key *string

	// The value of the tag.
	Value *string
	// contains filtered or unexported fields
}

type TargetWorkspaceState string

const (
	TargetWorkspaceStateAvailable        TargetWorkspaceState = "AVAILABLE"
	TargetWorkspaceStateAdminMaintenance TargetWorkspaceState = "ADMIN_MAINTENANCE"
)

type Tenancy string

const (
	TenancyDedicated Tenancy = "DEDICATED"
	TenancyShared    Tenancy = "SHARED"
)

type TerminateRequest struct {

	// The identifier of the WorkSpace.
	//
	// This member is required.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type UnsupportedNetworkConfigurationException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type UnsupportedWorkspaceConfigurationException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type UpdateResult struct {

	// A description of whether updates for the WorkSpace image are pending or
	// available.
	Description *string

	// Indicates whether updated drivers or other components are available for the
	// specified WorkSpace image.
	UpdateAvailable *bool
	// contains filtered or unexported fields
}

type UserStorage struct {

	// The size of the user volume.
	Capacity *string
	// contains filtered or unexported fields
}

type Workspace struct {

	// The identifier of the bundle used to create the WorkSpace.
	BundleId *string

	// The name of the WorkSpace, as seen by the operating system. The format of this
	// name varies. For more information, see  Launch a WorkSpace
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/launch-workspaces-tutorials.html).
	ComputerName *string

	// The identifier of the Directory Service directory for the WorkSpace.
	DirectoryId *string

	// The error code that is returned if the WorkSpace cannot be created.
	ErrorCode *string

	// The text of the error message that is returned if the WorkSpace cannot be
	// created.
	ErrorMessage *string

	// The IP address of the WorkSpace.
	IpAddress *string

	// The modification states of the WorkSpace.
	ModificationStates []ModificationState

	// The standby WorkSpace or primary WorkSpace related to the specified WorkSpace.
	RelatedWorkspaces []RelatedWorkspaceProperties

	// Indicates whether the data stored on the root volume is encrypted.
	RootVolumeEncryptionEnabled *bool

	// The operational state of the WorkSpace. After a WorkSpace is terminated, the
	// TERMINATED state is returned only briefly before the WorkSpace directory
	// metadata is cleaned up, so this state is rarely returned. To confirm that a
	// WorkSpace is terminated, check for the WorkSpace ID by using  DescribeWorkSpaces
	// (https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeWorkspaces.html).
	// If the WorkSpace ID isn't returned, then the WorkSpace has been successfully
	// terminated.
	State WorkspaceState

	// The identifier of the subnet for the WorkSpace.
	SubnetId *string

	// The user for the WorkSpace.
	UserName *string

	// Indicates whether the data stored on the user volume is encrypted.
	UserVolumeEncryptionEnabled *bool

	// The symmetric KMS key used to encrypt data stored on your WorkSpace. Amazon
	// WorkSpaces does not support asymmetric KMS keys.
	VolumeEncryptionKey *string

	// The identifier of the WorkSpace.
	WorkspaceId *string

	// The properties of the WorkSpace.
	WorkspaceProperties *WorkspaceProperties
	// contains filtered or unexported fields
}

type WorkspaceAccessProperties struct {

	// Indicates whether users can use Android and Android-compatible Chrome OS devices
	// to access their WorkSpaces.
	DeviceTypeAndroid AccessPropertyValue

	// Indicates whether users can use Chromebooks to access their WorkSpaces.
	DeviceTypeChromeOs AccessPropertyValue

	// Indicates whether users can use iOS devices to access their WorkSpaces.
	DeviceTypeIos AccessPropertyValue

	// Indicates whether users can use Linux clients to access their WorkSpaces.
	DeviceTypeLinux AccessPropertyValue

	// Indicates whether users can use macOS clients to access their WorkSpaces.
	DeviceTypeOsx AccessPropertyValue

	// Indicates whether users can access their WorkSpaces through a web browser.
	DeviceTypeWeb AccessPropertyValue

	// Indicates whether users can use Windows clients to access their WorkSpaces.
	DeviceTypeWindows AccessPropertyValue

	// Indicates whether users can use zero client devices to access their WorkSpaces.
	DeviceTypeZeroClient AccessPropertyValue
	// contains filtered or unexported fields
}

type WorkspaceBundle struct {

	// The identifier of the bundle.
	BundleId *string

	// The type of WorkSpace bundle.
	BundleType BundleType

	// The compute type of the bundle. For more information, see Amazon WorkSpaces
	// Bundles (http://aws.amazon.com/workspaces/details/#Amazon_WorkSpaces_Bundles).
	ComputeType *ComputeType

	// The time when the bundle was created.
	CreationTime *time.Time

	// The description of the bundle.
	Description *string

	// The identifier of the image that was used to create the bundle.
	ImageId *string

	// The last time that the bundle was updated.
	LastUpdatedTime *time.Time

	// The name of the bundle.
	Name *string

	// The owner of the bundle. This is the account identifier of the owner, or AMAZON
	// if the bundle is provided by Amazon Web Services.
	Owner *string

	// The size of the root volume.
	RootStorage *RootStorage

	// The state of the WorkSpace bundle.
	State WorkspaceBundleState

	// The size of the user volume.
	UserStorage *UserStorage
	// contains filtered or unexported fields
}

type WorkspaceBundleState string

const (
	WorkspaceBundleStateAvailable WorkspaceBundleState = "AVAILABLE"
	WorkspaceBundleStatePending   WorkspaceBundleState = "PENDING"
	WorkspaceBundleStateError     WorkspaceBundleState = "ERROR"
)

type WorkspaceConnectionStatus struct {

	// The connection state of the WorkSpace. The connection state is unknown if the
	// WorkSpace is stopped.
	ConnectionState ConnectionState

	// The timestamp of the connection status check.
	ConnectionStateCheckTimestamp *time.Time

	// The timestamp of the last known user connection.
	LastKnownUserConnectionTimestamp *time.Time

	// The identifier of the WorkSpace.
	WorkspaceId *string
	// contains filtered or unexported fields
}

type WorkspaceCreationProperties struct {

	// The identifier of your custom security group.
	CustomSecurityGroupId *string

	// The default organizational unit (OU) for your WorkSpaces directories. This
	// string must be the full Lightweight Directory Access Protocol (LDAP)
	// distinguished name for the target domain and OU. It must be in the form
	// "OU=value,DC=value,DC=value", where value is any string of characters, and the
	// number of domain components (DCs) is two or more. For example,
	// OU=WorkSpaces_machines,DC=machines,DC=example,DC=com.
	//
	// * To avoid errors,
	// certain characters in the distinguished name must be escaped. For more
	// information, see  Distinguished Names
	// (https://docs.microsoft.com/previous-versions/windows/desktop/ldap/distinguished-names)
	// in the Microsoft documentation.
	//
	// * The API doesn't validate whether the OU
	// exists.
	DefaultOu *string

	// Indicates whether internet access is enabled for your WorkSpaces.
	EnableInternetAccess *bool

	// Indicates whether maintenance mode is enabled for your WorkSpaces. For more
	// information, see WorkSpace Maintenance
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/workspace-maintenance.html).
	EnableMaintenanceMode *bool

	// Indicates whether Amazon WorkDocs is enabled for your WorkSpaces. If WorkDocs is
	// already enabled for a WorkSpaces directory and you disable it, new WorkSpaces
	// launched in the directory will not have WorkDocs enabled. However, WorkDocs
	// remains enabled for any existing WorkSpaces, unless you either disable users'
	// access to WorkDocs or you delete the WorkDocs site. To disable users' access to
	// WorkDocs, see Disabling Users
	// (https://docs.aws.amazon.com/workdocs/latest/adminguide/inactive-user.html) in
	// the Amazon WorkDocs Administration Guide. To delete a WorkDocs site, see
	// Deleting a Site
	// (https://docs.aws.amazon.com/workdocs/latest/adminguide/manage-sites.html) in
	// the Amazon WorkDocs Administration Guide. If you enable WorkDocs on a directory
	// that already has existing WorkSpaces, the existing WorkSpaces and any new
	// WorkSpaces that are launched in the directory will have WorkDocs enabled.
	EnableWorkDocs *bool

	// Indicates whether users are local administrators of their WorkSpaces.
	UserEnabledAsLocalAdministrator *bool
	// contains filtered or unexported fields
}

type WorkspaceDirectory struct {

	// The directory alias.
	Alias *string

	// The certificate-based authentication properties used to authenticate SAML 2.0
	// Identity Provider (IdP) user identities to Active Directory for WorkSpaces
	// login.
	CertificateBasedAuthProperties *CertificateBasedAuthProperties

	// The user name for the service account.
	CustomerUserName *string

	// The directory identifier.
	DirectoryId *string

	// The name of the directory.
	DirectoryName *string

	// The directory type.
	DirectoryType WorkspaceDirectoryType

	// The IP addresses of the DNS servers for the directory.
	DnsIpAddresses []string

	// The identifier of the IAM role. This is the role that allows Amazon WorkSpaces
	// to make calls to other services, such as Amazon EC2, on your behalf.
	IamRoleId *string

	// The identifiers of the IP access control groups associated with the directory.
	IpGroupIds []string

	// The registration code for the directory. This is the code that users enter in
	// their Amazon WorkSpaces client application to connect to the directory.
	RegistrationCode *string

	// Describes the enablement status, user access URL, and relay state parameter name
	// that are used for configuring federation with an SAML 2.0 identity provider.
	SamlProperties *SamlProperties

	// The default self-service permissions for WorkSpaces in the directory.
	SelfservicePermissions *SelfservicePermissions

	// The state of the directory's registration with Amazon WorkSpaces. After a
	// directory is deregistered, the DEREGISTERED state is returned very briefly
	// before the directory metadata is cleaned up, so this state is rarely returned.
	// To confirm that a directory is deregistered, check for the directory ID by using
	// DescribeWorkspaceDirectories
	// (https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeWorkspaceDirectories.html).
	// If the directory ID isn't returned, then the directory has been successfully
	// deregistered.
	State WorkspaceDirectoryState

	// The identifiers of the subnets used with the directory.
	SubnetIds []string

	// Specifies whether the directory is dedicated or shared. To use Bring Your Own
	// License (BYOL), this value must be set to DEDICATED. For more information, see
	// Bring Your Own Windows Desktop Images
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/byol-windows-images.html).
	Tenancy Tenancy

	// The devices and operating systems that users can use to access WorkSpaces.
	WorkspaceAccessProperties *WorkspaceAccessProperties

	// The default creation properties for all WorkSpaces in the directory.
	WorkspaceCreationProperties *DefaultWorkspaceCreationProperties

	// The identifier of the security group that is assigned to new WorkSpaces.
	WorkspaceSecurityGroupId *string
	// contains filtered or unexported fields
}

type WorkspaceDirectoryState string

const (
	WorkspaceDirectoryStateRegistering   WorkspaceDirectoryState = "REGISTERING"
	WorkspaceDirectoryStateRegistered    WorkspaceDirectoryState = "REGISTERED"
	WorkspaceDirectoryStateDeregistering WorkspaceDirectoryState = "DEREGISTERING"
	WorkspaceDirectoryStateDeregistered  WorkspaceDirectoryState = "DEREGISTERED"
	WorkspaceDirectoryStateError         WorkspaceDirectoryState = "ERROR"
)

type WorkspaceDirectoryType string

const (
	WorkspaceDirectoryTypeSimpleAd    WorkspaceDirectoryType = "SIMPLE_AD"
	WorkspaceDirectoryTypeAdConnector WorkspaceDirectoryType = "AD_CONNECTOR"
)

type WorkspaceImage struct {

	// The date when the image was created. If the image has been shared, the Amazon
	// Web Services account that the image has been shared with sees the original
	// creation date of the image.
	Created *time.Time

	// The description of the image.
	Description *string

	// The error code that is returned for the image.
	ErrorCode *string

	// The text of the error message that is returned for the image.
	ErrorMessage *string

	// The identifier of the image.
	ImageId *string

	// The name of the image.
	Name *string

	// The operating system that the image is running.
	OperatingSystem *OperatingSystem

	// The identifier of the Amazon Web Services account that owns the image.
	OwnerAccountId *string

	// Specifies whether the image is running on dedicated hardware. When Bring Your
	// Own License (BYOL) is enabled, this value is set to DEDICATED. For more
	// information, see Bring Your Own Windows Desktop Images
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/byol-windows-images.html).
	RequiredTenancy WorkspaceImageRequiredTenancy

	// The status of the image.
	State WorkspaceImageState

	// The updates (if any) that are available for the specified image.
	Updates *UpdateResult
	// contains filtered or unexported fields
}

type WorkspaceImageIngestionProcess string

const (
	WorkspaceImageIngestionProcessByolRegular          WorkspaceImageIngestionProcess = "BYOL_REGULAR"
	WorkspaceImageIngestionProcessByolGraphics         WorkspaceImageIngestionProcess = "BYOL_GRAPHICS"
	WorkspaceImageIngestionProcessByolGraphicspro      WorkspaceImageIngestionProcess = "BYOL_GRAPHICSPRO"
	WorkspaceImageIngestionProcessByolGraphicsG4dn     WorkspaceImageIngestionProcess = "BYOL_GRAPHICS_G4DN"
	WorkspaceImageIngestionProcessByolRegularWsp       WorkspaceImageIngestionProcess = "BYOL_REGULAR_WSP"
	WorkspaceImageIngestionProcessByolRegularByop      WorkspaceImageIngestionProcess = "BYOL_REGULAR_BYOP"
	WorkspaceImageIngestionProcessByolGraphicsG4dnByop WorkspaceImageIngestionProcess = "BYOL_GRAPHICS_G4DN_BYOP"
)

type WorkspaceImageRequiredTenancy string

const (
	WorkspaceImageRequiredTenancyDefault   WorkspaceImageRequiredTenancy = "DEFAULT"
	WorkspaceImageRequiredTenancyDedicated WorkspaceImageRequiredTenancy = "DEDICATED"
)

type WorkspaceImageState string

const (
	WorkspaceImageStateAvailable WorkspaceImageState = "AVAILABLE"
	WorkspaceImageStatePending   WorkspaceImageState = "PENDING"
	WorkspaceImageStateError     WorkspaceImageState = "ERROR"
)

type WorkspaceProperties struct {

	// The compute type. For more information, see Amazon WorkSpaces Bundles
	// (http://aws.amazon.com/workspaces/details/#Amazon_WorkSpaces_Bundles).
	ComputeTypeName Compute

	// The protocol. For more information, see  Protocols for Amazon WorkSpaces
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/amazon-workspaces-protocols.html).
	//
	// *
	// Only available for WorkSpaces created with PCoIP bundles.
	//
	// * The Protocols
	// property is case sensitive. Ensure you use PCOIP or WSP.
	//
	// * Unavailable for
	// Windows 7 WorkSpaces and WorkSpaces using GPU-based bundles (Graphics,
	// GraphicsPro, Graphics.g4dn, and GraphicsPro.g4dn).
	Protocols []Protocol

	// The size of the root volume. For important information about how to modify the
	// size of the root and user volumes, see Modify a WorkSpace
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/modify-workspaces.html).
	RootVolumeSizeGib *int32

	// The running mode. For more information, see Manage the WorkSpace Running Mode
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/running-mode.html).
	// The MANUAL value is only supported by Amazon WorkSpaces Core. Contact your
	// account team to be allow-listed to use this value. For more information, see
	// Amazon WorkSpaces Core (http://aws.amazon.com/workspaces/core/).
	RunningMode RunningMode

	// The time after a user logs off when WorkSpaces are automatically stopped.
	// Configured in 60-minute intervals.
	RunningModeAutoStopTimeoutInMinutes *int32

	// The size of the user storage. For important information about how to modify the
	// size of the root and user volumes, see Modify a WorkSpace
	// (https://docs.aws.amazon.com/workspaces/latest/adminguide/modify-workspaces.html).
	UserVolumeSizeGib *int32
	// contains filtered or unexported fields
}

type WorkspaceRequest struct {

	// The identifier of the bundle for the WorkSpace. You can use
	// DescribeWorkspaceBundles to list the available bundles.
	//
	// This member is required.
	BundleId *string

	// The identifier of the Directory Service directory for the WorkSpace. You can use
	// DescribeWorkspaceDirectories to list the available directories.
	//
	// This member is required.
	DirectoryId *string

	// The user name of the user for the WorkSpace. This user name must exist in the
	// Directory Service directory for the WorkSpace.
	//
	// This member is required.
	UserName *string

	// Indicates whether the data stored on the root volume is encrypted.
	RootVolumeEncryptionEnabled *bool

	// The tags for the WorkSpace.
	Tags []Tag

	// Indicates whether the data stored on the user volume is encrypted.
	UserVolumeEncryptionEnabled *bool

	// The symmetric KMS key used to encrypt data stored on your WorkSpace. Amazon
	// WorkSpaces does not support asymmetric KMS keys.
	VolumeEncryptionKey *string

	// The WorkSpace properties.
	WorkspaceProperties *WorkspaceProperties
	// contains filtered or unexported fields
}

type WorkspaceState string

const (
	WorkspaceStatePending          WorkspaceState = "PENDING"
	WorkspaceStateAvailable        WorkspaceState = "AVAILABLE"
	WorkspaceStateImpaired         WorkspaceState = "IMPAIRED"
	WorkspaceStateUnhealthy        WorkspaceState = "UNHEALTHY"
	WorkspaceStateRebooting        WorkspaceState = "REBOOTING"
	WorkspaceStateStarting         WorkspaceState = "STARTING"
	WorkspaceStateRebuilding       WorkspaceState = "REBUILDING"
	WorkspaceStateRestoring        WorkspaceState = "RESTORING"
	WorkspaceStateMaintenance      WorkspaceState = "MAINTENANCE"
	WorkspaceStateAdminMaintenance WorkspaceState = "ADMIN_MAINTENANCE"
	WorkspaceStateTerminating      WorkspaceState = "TERMINATING"
	WorkspaceStateTerminated       WorkspaceState = "TERMINATED"
	WorkspaceStateSuspended        WorkspaceState = "SUSPENDED"
	WorkspaceStateUpdating         WorkspaceState = "UPDATING"
	WorkspaceStateStopping         WorkspaceState = "STOPPING"
	WorkspaceStateStopped          WorkspaceState = "STOPPED"
	WorkspaceStateError            WorkspaceState = "ERROR"
)

type WorkspacesDefaultRoleNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type WorkspacesIpGroup struct {

	// The description of the group.
	GroupDesc *string

	// The identifier of the group.
	GroupId *string

	// The name of the group.
	GroupName *string

	// The rules.
	UserRules []IpRuleItem
	// contains filtered or unexported fields
}