package types

type AndStatement struct {

	// The statements to combine with AND logic. You can use any statements that can be
	// nested.
	//
	// This member is required.
	Statements []*Statement
}

type BlockAction ¶

type BlockAction struct {
}

type Body ¶

type Body struct {
}

type ByteMatchStatement ¶

type ByteMatchStatement struct {

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass detection. If you specify one or more
	// transformations in a rule statement, AWS WAF performs all transformations on the
	// content of the request component identified by FieldToMatch, starting from the
	// lowest priority setting, before inspecting the content for a match.
	//
	// This member is required.
	TextTransformations []*TextTransformation

	// The part of a web request that you want AWS WAF to inspect. For more
	// information, see FieldToMatch ().
	//
	// This member is required.
	FieldToMatch *FieldToMatch

	// The area within the portion of a web request that you want AWS WAF to search for
	// SearchString. Valid values include the following: CONTAINS The specified part of
	// the web request must include the value of SearchString, but the location doesn't
	// matter. CONTAINS_WORD The specified part of the web request must include the
	// value of SearchString, and SearchString must contain only alphanumeric
	// characters or underscore (A-Z, a-z, 0-9, or _). In addition, SearchString must
	// be a word, which means that both of the following are true:
	//
	//     * SearchString
	// is at the beginning of the specified part of the web request or is preceded by a
	// character other than an alphanumeric character or underscore (_). Examples
	// include the value of a header and ;BadBot.
	//
	//     * SearchString is at the end of
	// the specified part of the web request or is followed by a character other than
	// an alphanumeric character or underscore (_), for example, BadBot; and
	// -BadBot;.
	//
	// EXACTLY The value of the specified part of the web request must
	// exactly match the value of SearchString. STARTS_WITH The value of SearchString
	// must appear at the beginning of the specified part of the web request. ENDS_WITH
	// The value of SearchString must appear at the end of the specified part of the
	// web request.
	//
	// This member is required.
	PositionalConstraint PositionalConstraint

	// A string value that you want AWS WAF to search for. AWS WAF searches only in the
	// part of web requests that you designate for inspection in FieldToMatch (). The
	// maximum length of the value is 50 bytes. Valid values depend on the component
	// that you specify for inspection in FieldToMatch:
	//
	//     * Method: The HTTP method
	// that you want AWS WAF to search for. This indicates the type of operation
	// specified in the request.
	//
	//     * UriPath: The value that you want AWS WAF to
	// search for in the URI path, for example, /images/daily-ad.jpg.
	//
	//     <p>If
	// <code>SearchString</code> includes alphabetic characters A-Z and a-z, note that
	// the value is case sensitive.</p> <p> <b>If you're using the AWS WAF API</b> </p>
	// <p>Specify a base64-encoded version of the value. The maximum length of the
	// value before you base64-encode it is 50 bytes.</p> <p>For example, suppose the
	// value of <code>Type</code> is <code>HEADER</code> and the value of
	// <code>Data</code> is <code>User-Agent</code>. If you want to search the
	// <code>User-Agent</code> header for the value <code>BadBot</code>, you
	// base64-encode <code>BadBot</code> using MIME base64-encoding and include the
	// resulting value, <code>QmFkQm90</code>, in the value of
	// <code>SearchString</code>.</p> <p> <b>If you're using the AWS CLI or one of the
	// AWS SDKs</b> </p> <p>The value that you want AWS WAF to search for. The SDK
	// automatically base64 encodes the value.</p>
	//
	// This member is required.
	SearchString []byte
}

type CountAction ¶

type CountAction struct {
}

type DefaultAction ¶

type DefaultAction struct {

	// Specifies that AWS WAF should allow requests by default.
	Allow *AllowAction

	// Specifies that AWS WAF should block requests by default.
	Block *BlockAction
}

type ExcludedRule ¶

type ExcludedRule struct {

	// The name of the rule to exclude.
	//
	// This member is required.
	Name *string
}

type FieldToMatch ¶

type FieldToMatch struct {

	// Inspect the request body, which immediately follows the request headers. This is
	// the part of a request that contains any additional data that you want to send to
	// your web server as the HTTP request body, such as data from a form. Note that
	// only the first 8 KB (8192 bytes) of the request body are forwarded to AWS WAF
	// for inspection by the underlying host service. If you don't need to inspect more
	// than 8 KB, you can guarantee that you don't allow additional bytes in by
	// combining a statement that inspects the body of the web request, such as
	// ByteMatchStatement () or RegexPatternSetReferenceStatement (), with a
	// SizeConstraintStatement () that enforces an 8 KB size limit on the body of the
	// request. AWS WAF doesn't support inspecting the entire contents of web requests
	// whose bodies exceed the 8 KB limit.
	Body *Body

	// Inspect all query arguments.
	AllQueryArguments *AllQueryArguments

	// Inspect the HTTP method. The method indicates the type of operation that the
	// request is asking the origin to perform.
	Method *Method

	// Inspect the request URI path. This is the part of a web request that identifies
	// a resource, for example, /images/daily-ad.jpg.
	UriPath *UriPath

	// Inspect the query string. This is the part of a URL that appears after a ?
	// character, if any.
	QueryString *QueryString

	// Inspect a single header. Provide the name of the header to inspect, for example,
	// User-Agent or Referer. This setting isn't case sensitive.
	SingleHeader *SingleHeader

	// Inspect a single query argument. Provide the name of the query argument to
	// inspect, such as UserName or SalesRegion. The name can be up to 30 characters
	// long and isn't case sensitive. This is used only to indicate the web request
	// component for AWS WAF to inspect, in the FieldToMatch () specification.
	SingleQueryArgument *SingleQueryArgument
}

type FirewallManagerRuleGroup ¶

type FirewallManagerRuleGroup struct {

	// If you define more than one rule group in the first or last Firewall Manager
	// rule groups, AWS WAF evaluates each request against the rule groups in order,
	// starting from the lowest priority setting. The priorities don't need to be
	// consecutive, but they must all be different.
	//
	// This member is required.
	Priority *int32

	// The processing guidance for an AWS Firewall Manager rule. This is like a regular
	// rule Statement (), but it can only contain a rule group reference.
	//
	// This member is required.
	FirewallManagerStatement *FirewallManagerStatement

	// The name of the rule group. You cannot change the name of a rule group after you
	// create it.
	//
	// This member is required.
	Name *string

	// This is the latest version of AWS WAF, named AWS WAFV2, released in November,
	// 2019. For information, including how to migrate your AWS WAF resources from the
	// prior release, see the AWS WAF Developer Guide
	// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html).
	// Defines and enables Amazon CloudWatch metrics and web request sample collection.
	//
	// This member is required.
	VisibilityConfig *VisibilityConfig

	// The override action to apply to the rules in a rule group. Used only for rule
	// statements that reference a rule group, like RuleGroupReferenceStatement and
	// ManagedRuleGroupStatement. Set the override action to none to leave the rule
	// actions in effect. Set it to count to only count matches, regardless of the rule
	// action settings. In a Rule (), you must specify either this OverrideAction
	// setting or the rule Action setting, but not both:
	//
	//     * If the rule statement
	// references a rule group, use this override action setting and not the action
	// setting.
	//
	//     * If the rule statement does not reference a rule group, use the
	// rule action setting and not this rule override action setting.
	//
	// This member is required.
	OverrideAction *OverrideAction
}

A rule group that's defined for an AWS Firewall Manager WAF policy.

type FirewallManagerStatement ¶

type FirewallManagerStatement struct {

	// This is the latest version of AWS WAF, named AWS WAFV2, released in November,
	// 2019. For information, including how to migrate your AWS WAF resources from the
	// prior release, see the AWS WAF Developer Guide
	// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A rule
	// statement used to run the rules that are defined in a RuleGroup (). To use this,
	// create a rule group with your rules, then provide the ARN of the rule group in
	// this statement. You cannot nest a RuleGroupReferenceStatement, for example for
	// use inside a NotStatement or OrStatement. It can only be referenced as a
	// top-level statement within a rule.
	RuleGroupReferenceStatement *RuleGroupReferenceStatement

	// This is the latest version of AWS WAF, named AWS WAFV2, released in November,
	// 2019. For information, including how to migrate your AWS WAF resources from the
	// prior release, see the AWS WAF Developer Guide
	// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A rule
	// statement used to run the rules that are defined in a managed rule group. To use
	// this, provide the vendor name and the name of the rule group in this statement.
	// You can retrieve the required names by calling ListAvailableManagedRuleGroups
	// (). You can't nest a ManagedRuleGroupStatement, for example for use inside a
	// NotStatement or OrStatement. It can only be referenced as a top-level statement
	// within a rule.
	ManagedRuleGroupStatement *ManagedRuleGroupStatement
}

The processing guidance for an AWS Firewall Manager rule. This is like a regular rule Statement (), but it can only contain a rule group reference.

type ForwardedIPConfig ¶

type ForwardedIPConfig struct {

	// The name of the HTTP header to use for the IP address. For example, to use the
	// X-Forwarded-For (XFF) header, set this to X-Forwarded-For.  <note> <p>If the
	// specified header isn't present in the request, AWS WAF doesn't apply the rule to
	// the web request at all.</p> </note>
	//
	// This member is required.
	HeaderName *string

	// The match status to assign to the web request if the request doesn't have a
	// valid IP address in the specified position.  <note> <p>If the specified header
	// isn't present in the request, AWS WAF doesn't apply the rule to the web request
	// at all.</p> </note> <p>You can specify the following fallback behaviors:</p>
	// <ul> <li> <p>MATCH - Treat the web request as matching the rule statement. AWS
	// WAF applies the rule action to the request.</p> </li> <li> <p>NO_MATCH - Treat
	// the web request as not matching the rule statement.</p> </li> </ul>
	//
	// This member is required.
	FallbackBehavior FallbackBehavior
}

The configuration for inspecting IP addresses in an HTTP header that you specify, instead of using the IP address that's reported by the web request origin. Commonly, this is the X-Forwarded-For (XFF) header, but you can specify any header name. <note> If the specified header isn't present in the request, AWS WAF doesn't apply the rule to the web request at all. </note> This configuration is used for <a>GeoMatchStatement</a> and <a>RateBasedStatement</a>. For <a>IPSetReferenceStatement</a>, use <a>IPSetForwardedIPConfig</a> instead. AWS WAF only evaluates the first IP address found in the specified HTTP header.

type ForwardedIPPosition ¶

type ForwardedIPPosition string

const (
	ForwardedIPPositionFirst ForwardedIPPosition = "FIRST"
	ForwardedIPPositionLast  ForwardedIPPosition = "LAST"
	ForwardedIPPositionAny   ForwardedIPPosition = "ANY"
)

Enum values for ForwardedIPPosition

type GeoMatchStatement ¶

type GeoMatchStatement struct {

	// An array of two-character country codes, for example, [ "US", "CN" ], from the
	// alpha-2 country ISO codes of the ISO 3166 international standard.
	CountryCodes []CountryCode

	// The configuration for inspecting IP addresses in an HTTP header that you
	// specify, instead of using the IP address that's reported by the web request
	// origin. Commonly, this is the X-Forwarded-For (XFF) header, but you can specify
	// any header name.  <note> <p>If the specified header isn't present in the
	// request, AWS WAF doesn't apply the rule to the web request at all.</p> </note>
	ForwardedIPConfig *ForwardedIPConfig
}

type HTTPHeader ¶

type HTTPHeader struct {

	// The value of the HTTP header.
	Value *string

	// The name of the HTTP header.
	Name *string
}

type HTTPRequest ¶

type HTTPRequest struct {

	// The HTTP method specified in the sampled web request.
	Method *string

	// The two-letter country code for the country that the request originated from.
	// For a current list of country codes, see the Wikipedia entry ISO 3166-1 alpha-2
	// (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	Country *string

	// A complex type that contains the name and value for each header in the sampled
	// web request.
	Headers []*HTTPHeader

	// The IP address that the request originated from. If the web ACL is associated
	// with a CloudFront distribution, this is the value of one of the following fields
	// in CloudFront access logs:
	//
	//     * c-ip, if the viewer did not use an HTTP proxy
	// or a load balancer to send the request
	//
	//     * x-forwarded-for, if the viewer did
	// use an HTTP proxy or a load balancer to send the request
	ClientIP *string

	// The HTTP version specified in the sampled web request, for example, HTTP/1.1.
	HTTPVersion *string

	// The URI path of the request, which identifies the resource, for example,
	// /images/daily-ad.jpg.
	URI *string
}

type IPAddressVersion ¶

type IPAddressVersion string

const (
	IPAddressVersionIpv4 IPAddressVersion = "IPV4"
	IPAddressVersionIpv6 IPAddressVersion = "IPV6"
)

Enum values for IPAddressVersion

type IPSet ¶

type IPSet struct {

	// Specify IPV4 or IPV6.
	//
	// This member is required.
	IPAddressVersion IPAddressVersion

	// A unique identifier for the set. This ID is returned in the responses to create
	// and list commands. You provide it to operations like update and delete.
	//
	// This member is required.
	Id *string

	// A description of the IP set that helps with identification. You cannot change
	// the description of an IP set after you create it.
	Description *string

	// The name of the IP set. You cannot change the name of an IPSet after you create
	// it.
	//
	// This member is required.
	Name *string

	// The Amazon Resource Name (ARN) of the entity.
	//
	// This member is required.
	ARN *string

	// Contains an array of strings that specify one or more IP addresses or blocks of
	// IP addresses in Classless Inter-Domain Routing (CIDR) notation. AWS WAF supports
	// all address ranges for IP versions IPv4 and IPv6. Examples:
	//
	//     * To configure
	// AWS WAF to allow, block, or count requests that originated from the IP address
	// 192.0.2.44, specify 192.0.2.44/32.
	//
	//     * To configure AWS WAF to allow, block,
	// or count requests that originated from IP addresses from 192.0.2.0 to
	// 192.0.2.255, specify 192.0.2.0/24.
	//
	//     * To configure AWS WAF to allow, block,
	// or count requests that originated from the IP address
	// 1111:0000:0000:0000:0000:0000:0000:0111, specify
	// 1111:0000:0000:0000:0000:0000:0000:0111/128.
	//
	//     * To configure AWS WAF to
	// allow, block, or count requests that originated from IP addresses
	// 1111:0000:0000:0000:0000:0000:0000:0000 to
	// 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
	// 1111:0000:0000:0000:0000:0000:0000:0000/64.
	//
	// For more information about CIDR
	// notation, see the Wikipedia entry Classless Inter-Domain Routing
	// (https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing).
	//
	// This member is required.
	Addresses []*string
}

type IPSetForwardedIPConfig ¶

type IPSetForwardedIPConfig struct {

	// The name of the HTTP header to use for the IP address. For example, to use the
	// X-Forwarded-For (XFF) header, set this to X-Forwarded-For.  <note> <p>If the
	// specified header isn't present in the request, AWS WAF doesn't apply the rule to
	// the web request at all.</p> </note>
	//
	// This member is required.
	HeaderName *string

	// The match status to assign to the web request if the request doesn't have a
	// valid IP address in the specified position.  <note> <p>If the specified header
	// isn't present in the request, AWS WAF doesn't apply the rule to the web request
	// at all.</p> </note> <p>You can specify the following fallback behaviors:</p>
	// <ul> <li> <p>MATCH - Treat the web request as matching the rule statement. AWS
	// WAF applies the rule action to the request.</p> </li> <li> <p>NO_MATCH - Treat
	// the web request as not matching the rule statement.</p> </li> </ul>
	//
	// This member is required.
	FallbackBehavior FallbackBehavior

	// The position in the header to search for the IP address. The header can contain
	// IP addresses of the original client and also of proxies. For example, the header
	// value could be 10.1.1.1, 127.0.0.0, 10.10.10.10 where the first IP address
	// identifies the original client and the rest identify proxies that the request
	// went through. The options for this setting are the following:
	//
	//     * FIRST -
	// Inspect the first IP address in the list of IP addresses in the header. This is
	// usually the client's original IP.
	//
	//     * LAST - Inspect the last IP address in
	// the list of IP addresses in the header.
	//
	//     * ANY - Inspect all IP addresses in
	// the header for a match. If the header contains more than 10 IP addresses, AWS
	// WAF inspects the last 10.
	//
	// This member is required.
	Position ForwardedIPPosition
}

The configuration for inspecting IP addresses in an HTTP header that you specify, instead of using the IP address that's reported by the web request origin. Commonly, this is the X-Forwarded-For (XFF) header, but you can specify any header name. <note> If the specified header isn't present in the request, AWS WAF doesn't apply the rule to the web request at all. </note> This configuration is used only for <a>IPSetReferenceStatement</a>. For <a>GeoMatchStatement</a> and <a>RateBasedStatement</a>, use <a>ForwardedIPConfig</a> instead.

type IPSetReferenceStatement ¶

type IPSetReferenceStatement struct {

	// The Amazon Resource Name (ARN) of the IPSet () that this statement references.
	//
	// This member is required.
	ARN *string

	// The configuration for inspecting IP addresses in an HTTP header that you
	// specify, instead of using the IP address that's reported by the web request
	// origin. Commonly, this is the X-Forwarded-For (XFF) header, but you can specify
	// any header name.  <note> <p>If the specified header isn't present in the
	// request, AWS WAF doesn't apply the rule to the web request at all.</p> </note>
	IPSetForwardedIPConfig *IPSetForwardedIPConfig
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A rule statement used to detect web requests coming from particular IP addresses or address ranges. To use this, create an IPSet () that specifies the addresses you want to detect, then use the ARN of that set in this statement. To create an IP set, see CreateIPSet (). Each IP set rule statement references an IP set. You create and maintain the set independent of your rules. This allows you to use the single set in multiple rules. When you update the referenced set, AWS WAF automatically updates all rules that reference it.

type IPSetSummary ¶

type IPSetSummary struct {

	// A token used for optimistic locking. AWS WAF returns a token to your get and
	// list requests, to mark the state of the entity at the time of the request. To
	// make changes to the entity associated with the token, you provide the token to
	// operations like update and delete. AWS WAF uses the token to ensure that no
	// changes have been made to the entity since you last retrieved it. If a change
	// has been made, the update fails with a WAFOptimisticLockException. If this
	// happens, perform another get, and use the new token returned by that operation.
	LockToken *string

	// A unique identifier for the set. This ID is returned in the responses to create
	// and list commands. You provide it to operations like update and delete.
	Id *string

	// The name of the IP set. You cannot change the name of an IPSet after you create
	// it.
	Name *string

	// A description of the IP set that helps with identification. You cannot change
	// the description of an IP set after you create it.
	Description *string

	// The Amazon Resource Name (ARN) of the entity.
	ARN *string
}

type LoggingConfiguration ¶

type LoggingConfiguration struct {

	// The Amazon Kinesis Data Firehose Amazon Resource Name (ARNs) that you want to
	// associate with the web ACL.
	//
	// This member is required.
	LogDestinationConfigs []*string

	// The parts of the request that you want to keep out of the logs. For example, if
	// you redact the cookie field, the cookie field in the firehose will be xxx.
	RedactedFields []*FieldToMatch

	// The Amazon Resource Name (ARN) of the web ACL that you want to associate with
	// LogDestinationConfigs.
	//
	// This member is required.
	ResourceArn *string
}

type ManagedRuleGroupStatement ¶

type ManagedRuleGroupStatement struct {

	// The name of the managed rule group. You use this, along with the vendor name, to
	// identify the rule group.
	//
	// This member is required.
	Name *string

	// The rules whose actions are set to COUNT by the web ACL, regardless of the
	// action that is set on the rule. This effectively excludes the rule from acting
	// on web requests.
	ExcludedRules []*ExcludedRule

	// The name of the managed rule group vendor. You use this, along with the rule
	// group name, to identify the rule group.
	//
	// This member is required.
	VendorName *string
}

type ManagedRuleGroupSummary ¶

type ManagedRuleGroupSummary struct {

	// The name of the managed rule group vendor. You use this, along with the rule
	// group name, to identify the rule group.
	VendorName *string

	// The description of the managed rule group, provided by AWS Managed Rules or the
	// AWS Marketplace seller who manages it.
	Description *string

	// The name of the managed rule group. You use this, along with the vendor name, to
	// identify the rule group.
	Name *string
}

type Method ¶

type Method struct {
}

type NoneAction ¶

type NoneAction struct {
}

type NotStatement ¶

type NotStatement struct {

	// The statement to negate. You can use any statement that can be nested.
	//
	// This member is required.
	Statement *Statement
}

type OrStatement ¶

type OrStatement struct {

	// The statements to combine with OR logic. You can use any statements that can be
	// nested.
	//
	// This member is required.
	Statements []*Statement
}

type OverrideAction ¶

type OverrideAction struct {

	// Don't override the rule action setting.
	None *NoneAction

	// Override the rule action setting to count.
	Count *CountAction
}

The override action to apply to the rules in a rule group. Used only for rule statements that reference a rule group, like RuleGroupReferenceStatement and ManagedRuleGroupStatement. Set the override action to none to leave the rule actions in effect. Set it to count to only count matches, regardless of the rule action settings. In a Rule (), you must specify either this OverrideAction setting or the rule Action setting, but not both:

If the rule statement

references a rule group, use this override action setting and not the action setting.

If the rule statement does not reference a rule group, use the

rule action setting and not this rule override action setting.

type ParameterExceptionField ¶

type ParameterExceptionField string

const (
	ParameterExceptionFieldWeb_acl                           ParameterExceptionField = "WEB_ACL"
	ParameterExceptionFieldRule_group                        ParameterExceptionField = "RULE_GROUP"
	ParameterExceptionFieldRegex_pattern_set                 ParameterExceptionField = "REGEX_PATTERN_SET"
	ParameterExceptionFieldIp_set                            ParameterExceptionField = "IP_SET"
	ParameterExceptionFieldManaged_rule_set                  ParameterExceptionField = "MANAGED_RULE_SET"
	ParameterExceptionFieldRule                              ParameterExceptionField = "RULE"
	ParameterExceptionFieldExcluded_rule                     ParameterExceptionField = "EXCLUDED_RULE"
	ParameterExceptionFieldStatement                         ParameterExceptionField = "STATEMENT"
	ParameterExceptionFieldByte_match_statement              ParameterExceptionField = "BYTE_MATCH_STATEMENT"
	ParameterExceptionFieldSqli_match_statement              ParameterExceptionField = "SQLI_MATCH_STATEMENT"
	ParameterExceptionFieldXss_match_statement               ParameterExceptionField = "XSS_MATCH_STATEMENT"
	ParameterExceptionFieldSize_constraint_statement         ParameterExceptionField = "SIZE_CONSTRAINT_STATEMENT"
	ParameterExceptionFieldGeo_match_statement               ParameterExceptionField = "GEO_MATCH_STATEMENT"
	ParameterExceptionFieldRate_based_statement              ParameterExceptionField = "RATE_BASED_STATEMENT"
	ParameterExceptionFieldRule_group_reference_statement    ParameterExceptionField = "RULE_GROUP_REFERENCE_STATEMENT"
	ParameterExceptionFieldRegex_pattern_reference_statement ParameterExceptionField = "REGEX_PATTERN_REFERENCE_STATEMENT"
	ParameterExceptionFieldIp_set_reference_statement        ParameterExceptionField = "IP_SET_REFERENCE_STATEMENT"
	ParameterExceptionFieldManaged_rule_set_statement        ParameterExceptionField = "MANAGED_RULE_SET_STATEMENT"
	ParameterExceptionFieldAnd_statement                     ParameterExceptionField = "AND_STATEMENT"
	ParameterExceptionFieldOr_statement                      ParameterExceptionField = "OR_STATEMENT"
	ParameterExceptionFieldNot_statement                     ParameterExceptionField = "NOT_STATEMENT"
	ParameterExceptionFieldIp_address                        ParameterExceptionField = "IP_ADDRESS"
	ParameterExceptionFieldIp_address_version                ParameterExceptionField = "IP_ADDRESS_VERSION"
	ParameterExceptionFieldField_to_match                    ParameterExceptionField = "FIELD_TO_MATCH"
	ParameterExceptionFieldText_transformation               ParameterExceptionField = "TEXT_TRANSFORMATION"
	ParameterExceptionFieldSingle_query_argument             ParameterExceptionField = "SINGLE_QUERY_ARGUMENT"
	ParameterExceptionFieldSingle_header                     ParameterExceptionField = "SINGLE_HEADER"
	ParameterExceptionFieldDefault_action                    ParameterExceptionField = "DEFAULT_ACTION"
	ParameterExceptionFieldRule_action                       ParameterExceptionField = "RULE_ACTION"
	ParameterExceptionFieldEntity_limit                      ParameterExceptionField = "ENTITY_LIMIT"
	ParameterExceptionFieldOverride_action                   ParameterExceptionField = "OVERRIDE_ACTION"
	ParameterExceptionFieldScope_value                       ParameterExceptionField = "SCOPE_VALUE"
	ParameterExceptionFieldResource_arn                      ParameterExceptionField = "RESOURCE_ARN"
	ParameterExceptionFieldResource_type                     ParameterExceptionField = "RESOURCE_TYPE"
	ParameterExceptionFieldTags                              ParameterExceptionField = "TAGS"
	ParameterExceptionFieldTag_keys                          ParameterExceptionField = "TAG_KEYS"
	ParameterExceptionFieldMetric_name                       ParameterExceptionField = "METRIC_NAME"
	ParameterExceptionFieldFirewall_manager_statement        ParameterExceptionField = "FIREWALL_MANAGER_STATEMENT"
	ParameterExceptionFieldFallback_behavior                 ParameterExceptionField = "FALLBACK_BEHAVIOR"
	ParameterExceptionFieldPosition                          ParameterExceptionField = "POSITION"
	ParameterExceptionFieldForwarded_ip_config               ParameterExceptionField = "FORWARDED_IP_CONFIG"
	ParameterExceptionFieldIp_set_forwarded_ip_config        ParameterExceptionField = "IP_SET_FORWARDED_IP_CONFIG"
	ParameterExceptionFieldHeader_name                       ParameterExceptionField = "HEADER_NAME"
)

Enum values for ParameterExceptionField

type PositionalConstraint ¶

type PositionalConstraint string

const (
	PositionalConstraintExactly       PositionalConstraint = "EXACTLY"
	PositionalConstraintStarts_with   PositionalConstraint = "STARTS_WITH"
	PositionalConstraintEnds_with     PositionalConstraint = "ENDS_WITH"
	PositionalConstraintContains      PositionalConstraint = "CONTAINS"
	PositionalConstraintContains_word PositionalConstraint = "CONTAINS_WORD"
)

Enum values for PositionalConstraint

type QueryString ¶

type QueryString struct {
}

type RateBasedStatement ¶

type RateBasedStatement struct {

	// The limit on requests per 5-minute period for a single originating IP address.
	// If the statement includes a ScopeDownStatement, this limit is applied only to
	// the requests that match the statement.
	//
	// This member is required.
	Limit *int64

	// An optional nested statement that narrows the scope of the rate-based statement
	// to matching web requests. This can be any nestable statement, and you can nest
	// statements at any level below this scope-down statement.
	ScopeDownStatement *Statement

	// The configuration for inspecting IP addresses in an HTTP header that you
	// specify, instead of using the IP address that's reported by the web request
	// origin. Commonly, this is the X-Forwarded-For (XFF) header, but you can specify
	// any header name.  <note> <p>If the specified header isn't present in the
	// request, AWS WAF doesn't apply the rule to the web request at all.</p> </note>
	// <p>This is required if <code>AggregateKeyType</code> is set to
	// <code>FORWARDED_IP</code>.</p>
	ForwardedIPConfig *ForwardedIPConfig

	// Setting that indicates how to aggregate the request counts. The options are the
	// following:
	//
	//     * IP - Aggregate the request counts on the IP address from the
	// web request origin.
	//
	//     * FORWARDED_IP - Aggregate the request counts on the
	// first IP address in an HTTP header. If you use this, configure the
	// ForwardedIPConfig, to specify the header to use.
	//
	// This member is required.
	AggregateKeyType RateBasedStatementAggregateKeyType
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A rate-based rule tracks the rate of requests for each originating IP address, and triggers the rule action when the rate exceeds a limit that you specify on the number of requests in any 5-minute time span. You can use this to put a temporary block on requests from an IP address that is sending excessive requests. When the rule action triggers, AWS WAF blocks additional requests from the IP address until the request rate falls below the limit. You can optionally nest another statement inside the rate-based statement, to narrow the scope of the rule so that it only counts requests that match the nested statement. For example, based on recent requests that you have seen from an attacker, you might create a rate-based rule with a nested AND rule statement that contains the following nested statements:

An IP match statement with an IP set that

specified the address 192.0.2.44.

A string match statement that searches

in the User-Agent header for the string BadBot.

In this rate-based rule, you also define a rate limit. For this example, the rate limit is 1,000. Requests that meet both of the conditions in the statements are counted. If the count exceeds 1,000 requests per five minutes, the rule action triggers. Requests that do not meet both conditions are not counted towards the rate limit and are not affected by this rule. You cannot nest a RateBasedStatement, for example for use inside a NotStatement or OrStatement. It can only be referenced as a top-level statement within a rule.

type RateBasedStatementAggregateKeyType ¶

type RateBasedStatementAggregateKeyType string

const (
	RateBasedStatementAggregateKeyTypeIp           RateBasedStatementAggregateKeyType = "IP"
	RateBasedStatementAggregateKeyTypeForwarded_ip RateBasedStatementAggregateKeyType = "FORWARDED_IP"
)

Enum values for RateBasedStatementAggregateKeyType

type RateBasedStatementManagedKeysIPSet ¶

type RateBasedStatementManagedKeysIPSet struct {
	IPAddressVersion IPAddressVersion

	// The IP addresses that are currently blocked.
	Addresses []*string
}

type Regex ¶

type Regex struct {

	// The string representing the regular expression.
	RegexString *string
}

type RegexPatternSet ¶

type RegexPatternSet struct {

	// The name of the set. You cannot change the name after you create the set.
	Name *string

	// The regular expression patterns in the set.
	RegularExpressionList []*Regex

	// A description of the set that helps with identification. You cannot change the
	// description of a set after you create it.
	Description *string

	// A unique identifier for the set. This ID is returned in the responses to create
	// and list commands. You provide it to operations like update and delete.
	Id *string

	// The Amazon Resource Name (ARN) of the entity.
	ARN *string
}

type RegexPatternSetReferenceStatement ¶

type RegexPatternSetReferenceStatement struct {

	// The Amazon Resource Name (ARN) of the RegexPatternSet () that this statement
	// references.
	//
	// This member is required.
	ARN *string

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass detection. If you specify one or more
	// transformations in a rule statement, AWS WAF performs all transformations on the
	// content of the request component identified by FieldToMatch, starting from the
	// lowest priority setting, before inspecting the content for a match.
	//
	// This member is required.
	TextTransformations []*TextTransformation

	// The part of a web request that you want AWS WAF to inspect. For more
	// information, see FieldToMatch ().
	//
	// This member is required.
	FieldToMatch *FieldToMatch
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A rule statement used to search web request components for matches with regular expressions. To use this, create a RegexPatternSet () that specifies the expressions that you want to detect, then use the ARN of that set in this statement. A web request matches the pattern set rule statement if the request component matches any of the patterns in the set. To create a regex pattern set, see CreateRegexPatternSet (). Each regex pattern set rule statement references a regex pattern set. You create and maintain the set independent of your rules. This allows you to use the single set in multiple rules. When you update the referenced set, AWS WAF automatically updates all rules that reference it.

type RegexPatternSetSummary ¶

type RegexPatternSetSummary struct {

	// The name of the data type instance. You cannot change the name after you create
	// the instance.
	Name *string

	// The Amazon Resource Name (ARN) of the entity.
	ARN *string

	// A description of the set that helps with identification. You cannot change the
	// description of a set after you create it.
	Description *string

	// A unique identifier for the set. This ID is returned in the responses to create
	// and list commands. You provide it to operations like update and delete.
	Id *string

	// A token used for optimistic locking. AWS WAF returns a token to your get and
	// list requests, to mark the state of the entity at the time of the request. To
	// make changes to the entity associated with the token, you provide the token to
	// operations like update and delete. AWS WAF uses the token to ensure that no
	// changes have been made to the entity since you last retrieved it. If a change
	// has been made, the update fails with a WAFOptimisticLockException. If this
	// happens, perform another get, and use the new token returned by that operation.
	LockToken *string
}

type ResourceType ¶

type ResourceType string

const (
	ResourceTypeApplication_load_balancer ResourceType = "APPLICATION_LOAD_BALANCER"
	ResourceTypeApi_gateway               ResourceType = "API_GATEWAY"
)

Enum values for ResourceType

type Rule ¶

type Rule struct {

	// If you define more than one Rule in a WebACL, AWS WAF evaluates each request
	// against the Rules in order based on the value of Priority. AWS WAF processes
	// rules with lower priority first. The priorities don't need to be consecutive,
	// but they must all be different.
	//
	// This member is required.
	Priority *int32

	// The action that AWS WAF should take on a web request when it matches the rule
	// statement. Settings at the web ACL level can override the rule action setting.
	// This is used only for rules whose statements do not reference a rule group. Rule
	// statements that reference a rule group include RuleGroupReferenceStatement and
	// ManagedRuleGroupStatement. You must specify either this Action setting or the
	// rule OverrideAction setting, but not both:
	//
	//     * If the rule statement does not
	// reference a rule group, use this rule action setting and not the rule override
	// action setting.
	//
	//     * If the rule statement references a rule group, use the
	// override action setting and not this action setting.
	Action *RuleAction

	// The override action to apply to the rules in a rule group. Used only for rule
	// statements that reference a rule group, like RuleGroupReferenceStatement and
	// ManagedRuleGroupStatement. Set the override action to none to leave the rule
	// actions in effect. Set it to count to only count matches, regardless of the rule
	// action settings. In a Rule (), you must specify either this OverrideAction
	// setting or the rule Action setting, but not both:
	//
	//     * If the rule statement
	// references a rule group, use this override action setting and not the action
	// setting.
	//
	//     * If the rule statement does not reference a rule group, use the
	// rule action setting and not this rule override action setting.
	OverrideAction *OverrideAction

	// The name of the rule. You can't change the name of a Rule after you create it.
	//
	// This member is required.
	Name *string

	// The AWS WAF processing statement for the rule, for example ByteMatchStatement ()
	// or SizeConstraintStatement ().
	//
	// This member is required.
	Statement *Statement

	// Defines and enables Amazon CloudWatch metrics and web request sample collection.
	//
	// This member is required.
	VisibilityConfig *VisibilityConfig
}

type RuleAction ¶

type RuleAction struct {

	// Instructs AWS WAF to allow the web request.
	Allow *AllowAction

	// Instructs AWS WAF to count the web request and allow it.
	Count *CountAction

	// Instructs AWS WAF to block the web request.
	Block *BlockAction
}

type RuleGroup ¶

type RuleGroup struct {

	// A unique identifier for the rule group. This ID is returned in the responses to
	// create and list commands. You provide it to operations like update and delete.
	//
	// This member is required.
	Id *string

	// The Amazon Resource Name (ARN) of the entity.
	//
	// This member is required.
	ARN *string

	// Defines and enables Amazon CloudWatch metrics and web request sample collection.
	//
	// This member is required.
	VisibilityConfig *VisibilityConfig

	// The Rule () statements used to identify the web requests that you want to allow,
	// block, or count. Each rule includes one top-level statement that AWS WAF uses to
	// identify matching web requests, and parameters that govern how AWS WAF handles
	// them.
	Rules []*Rule

	// The name of the rule group. You cannot change the name of a rule group after you
	// create it.
	//
	// This member is required.
	Name *string

	// A description of the rule group that helps with identification. You cannot
	// change the description of a rule group after you create it.
	Description *string

	// The web ACL capacity units (WCUs) required for this rule group. When you create
	// your own rule group, you define this, and you cannot change it after creation.
	// When you add or modify the rules in a rule group, AWS WAF enforces this limit.
	// You can check the capacity for a set of rules using CheckCapacity (). AWS WAF
	// uses WCUs to calculate and control the operating resources that are used to run
	// your rules, rule groups, and web ACLs. AWS WAF calculates capacity differently
	// for each rule type, to reflect the relative cost of each rule. Simple rules that
	// cost little to run use fewer WCUs than more complex rules that use more
	// processing power. Rule group capacity is fixed at creation, which helps users
	// plan their web ACL WCU usage when they use a rule group. The WCU limit for web
	// ACLs is 1,500.
	//
	// This member is required.
	Capacity *int64
}

type RuleGroupReferenceStatement ¶

type RuleGroupReferenceStatement struct {

	// The Amazon Resource Name (ARN) of the entity.
	//
	// This member is required.
	ARN *string

	// The names of rules that are in the referenced rule group, but that you want AWS
	// WAF to exclude from processing for this rule statement.
	ExcludedRules []*ExcludedRule
}

type RuleGroupSummary ¶

type RuleGroupSummary struct {

	// A token used for optimistic locking. AWS WAF returns a token to your get and
	// list requests, to mark the state of the entity at the time of the request. To
	// make changes to the entity associated with the token, you provide the token to
	// operations like update and delete. AWS WAF uses the token to ensure that no
	// changes have been made to the entity since you last retrieved it. If a change
	// has been made, the update fails with a WAFOptimisticLockException. If this
	// happens, perform another get, and use the new token returned by that operation.
	LockToken *string

	// A unique identifier for the rule group. This ID is returned in the responses to
	// create and list commands. You provide it to operations like update and delete.
	Id *string

	// A description of the rule group that helps with identification. You cannot
	// change the description of a rule group after you create it.
	Description *string

	// The name of the data type instance. You cannot change the name after you create
	// the instance.
	Name *string

	// The Amazon Resource Name (ARN) of the entity.
	ARN *string
}

type RuleSummary ¶

type RuleSummary struct {

	// This is the latest version of AWS WAF, named AWS WAFV2, released in November,
	// 2019. For information, including how to migrate your AWS WAF resources from the
	// prior release, see the AWS WAF Developer Guide
	// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). The
	// action that AWS WAF should take on a web request when it matches a rule's
	// statement. Settings at the web ACL level can override the rule action setting.
	Action *RuleAction

	// The name of the rule.
	Name *string
}

type SampledHTTPRequest ¶

type SampledHTTPRequest struct {

	// A complex type that contains detailed information about the request.
	//
	// This member is required.
	Request *HTTPRequest

	// The action for the Rule that the request matched: ALLOW, BLOCK, or COUNT.
	Action *string

	// A value that indicates how one result in the response relates proportionally to
	// other results in the response. For example, a result that has a weight of 2
	// represents roughly twice as many web requests as a result that has a weight of
	// 1.
	//
	// This member is required.
	Weight *int64

	// The name of the Rule that the request matched. For managed rule groups, the
	// format for this name is ##. For your own rule groups, the format for this name
	// is #. If the rule is not in a rule group, the format is .
	RuleNameWithinRuleGroup *string

	// The time at which AWS WAF received the request from your AWS resource, in Unix
	// time format (in seconds).
	Timestamp *time.Time
}

type Scope ¶

type Scope string

const (
	ScopeCloudfront Scope = "CLOUDFRONT"
	ScopeRegional   Scope = "REGIONAL"
)

Enum values for Scope

type SingleHeader ¶

type SingleHeader struct {

	// The name of the query header to inspect.
	//
	// This member is required.
	Name *string
}

type SingleQueryArgument ¶

type SingleQueryArgument struct {

	// The name of the query argument to inspect.
	//
	// This member is required.
	Name *string
}

type SizeConstraintStatement ¶

type SizeConstraintStatement struct {

	// The size, in byte, to compare to the request part, after any transformations.
	//
	// This member is required.
	Size *int64

	// The operator to use to compare the request part to the size setting.
	//
	// This member is required.
	ComparisonOperator ComparisonOperator

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass detection. If you specify one or more
	// transformations in a rule statement, AWS WAF performs all transformations on the
	// content of the request component identified by FieldToMatch, starting from the
	// lowest priority setting, before inspecting the content for a match.
	//
	// This member is required.
	TextTransformations []*TextTransformation

	// The part of a web request that you want AWS WAF to inspect. For more
	// information, see FieldToMatch ().
	//
	// This member is required.
	FieldToMatch *FieldToMatch
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A rule statement that compares a number of bytes against the size of a request component, using a comparison operator, such as greater than (>) or less than (<). For example, you can use a size constraint statement to look for query strings that are longer than 100 bytes. If you configure AWS WAF to inspect the request body, AWS WAF inspects only the first 8192 bytes (8 KB). If the request body for your web requests never exceeds 8192 bytes, you can create a size constraint condition and block requests that have a request body greater than 8192 bytes. If you choose URI for the value of Part of the request to filter on, the slash (/) in the URI counts as one character. For example, the URI /logo.jpg is nine characters long.

type SqliMatchStatement ¶

type SqliMatchStatement struct {

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass detection. If you specify one or more
	// transformations in a rule statement, AWS WAF performs all transformations on the
	// content of the request component identified by FieldToMatch, starting from the
	// lowest priority setting, before inspecting the content for a match.
	//
	// This member is required.
	TextTransformations []*TextTransformation

	// The part of a web request that you want AWS WAF to inspect. For more
	// information, see FieldToMatch ().
	//
	// This member is required.
	FieldToMatch *FieldToMatch
}

type Statement ¶

type Statement struct {

	// A rule statement used to run the rules that are defined in a managed rule group.
	// To use this, provide the vendor name and the name of the rule group in this
	// statement. You can retrieve the required names by calling
	// ListAvailableManagedRuleGroups (). You can't nest a ManagedRuleGroupStatement,
	// for example for use inside a NotStatement or OrStatement. It can only be
	// referenced as a top-level statement within a rule.
	ManagedRuleGroupStatement *ManagedRuleGroupStatement

	// A rule statement used to run the rules that are defined in a RuleGroup (). To
	// use this, create a rule group with your rules, then provide the ARN of the rule
	// group in this statement. You cannot nest a RuleGroupReferenceStatement, for
	// example for use inside a NotStatement or OrStatement. It can only be referenced
	// as a top-level statement within a rule.
	RuleGroupReferenceStatement *RuleGroupReferenceStatement

	// A rule statement that defines a string match search for AWS WAF to apply to web
	// requests. The byte match statement provides the bytes to search for, the
	// location in requests that you want AWS WAF to search, and other settings. The
	// bytes to search for are typically a string that corresponds with ASCII
	// characters. In the AWS WAF console and the developer guide, this is refered to
	// as a string match statement.
	ByteMatchStatement *ByteMatchStatement

	// A logical rule statement used to combine other rule statements with AND logic.
	// You provide more than one Statement () within the AndStatement.
	AndStatement *AndStatement

	// A rate-based rule tracks the rate of requests for each originating IP address,
	// and triggers the rule action when the rate exceeds a limit that you specify on
	// the number of requests in any 5-minute time span. You can use this to put a
	// temporary block on requests from an IP address that is sending excessive
	// requests. When the rule action triggers, AWS WAF blocks additional requests from
	// the IP address until the request rate falls below the limit. You can optionally
	// nest another statement inside the rate-based statement, to narrow the scope of
	// the rule so that it only counts requests that match the nested statement. For
	// example, based on recent requests that you have seen from an attacker, you might
	// create a rate-based rule with a nested AND rule statement that contains the
	// following nested statements:
	//
	//     * An IP match statement with an IP set that
	// specified the address 192.0.2.44.
	//
	//     * A string match statement that searches
	// in the User-Agent header for the string BadBot.
	//
	// In this rate-based rule, you
	// also define a rate limit. For this example, the rate limit is 1,000. Requests
	// that meet both of the conditions in the statements are counted. If the count
	// exceeds 1,000 requests per five minutes, the rule action triggers. Requests that
	// do not meet both conditions are not counted towards the rate limit and are not
	// affected by this rule. You cannot nest a RateBasedStatement, for example for use
	// inside a NotStatement or OrStatement. It can only be referenced as a top-level
	// statement within a rule.
	RateBasedStatement *RateBasedStatement

	// A logical rule statement used to negate the results of another rule statement.
	// You provide one Statement () within the NotStatement.
	NotStatement *NotStatement

	// A rule statement used to identify web requests based on country of origin.
	GeoMatchStatement *GeoMatchStatement

	// A logical rule statement used to combine other rule statements with OR logic.
	// You provide more than one Statement () within the OrStatement.
	OrStatement *OrStatement

	// Attackers sometimes insert malicious SQL code into web requests in an effort to
	// extract data from your database. To allow or block web requests that appear to
	// contain malicious SQL code, create one or more SQL injection match conditions.
	// An SQL injection match condition identifies the part of web requests, such as
	// the URI or the query string, that you want AWS WAF to inspect. Later in the
	// process, when you create a web ACL, you specify whether to allow or block
	// requests that appear to contain malicious SQL code.
	SqliMatchStatement *SqliMatchStatement

	// A rule statement used to search web request components for matches with regular
	// expressions. To use this, create a RegexPatternSet () that specifies the
	// expressions that you want to detect, then use the ARN of that set in this
	// statement. A web request matches the pattern set rule statement if the request
	// component matches any of the patterns in the set. To create a regex pattern set,
	// see CreateRegexPatternSet (). Each regex pattern set rule statement references a
	// regex pattern set. You create and maintain the set independent of your rules.
	// This allows you to use the single set in multiple rules. When you update the
	// referenced set, AWS WAF automatically updates all rules that reference it.
	RegexPatternSetReferenceStatement *RegexPatternSetReferenceStatement

	// A rule statement used to detect web requests coming from particular IP addresses
	// or address ranges. To use this, create an IPSet () that specifies the addresses
	// you want to detect, then use the ARN of that set in this statement. To create an
	// IP set, see CreateIPSet (). Each IP set rule statement references an IP set. You
	// create and maintain the set independent of your rules. This allows you to use
	// the single set in multiple rules. When you update the referenced set, AWS WAF
	// automatically updates all rules that reference it.
	IPSetReferenceStatement *IPSetReferenceStatement

	// A rule statement that defines a cross-site scripting (XSS) match search for AWS
	// WAF to apply to web requests. XSS attacks are those where the attacker uses
	// vulnerabilities in a benign website as a vehicle to inject malicious client-site
	// scripts into other legitimate web browsers. The XSS match statement provides the
	// location in requests that you want AWS WAF to search and text transformations to
	// use on the search area before AWS WAF searches for character sequences that are
	// likely to be malicious strings.
	XssMatchStatement *XssMatchStatement

	// A rule statement that compares a number of bytes against the size of a request
	// component, using a comparison operator, such as greater than (>) or less than
	// (<). For example, you can use a size constraint statement to look for query
	// strings that are longer than 100 bytes. If you configure AWS WAF to inspect the
	// request body, AWS WAF inspects only the first 8192 bytes (8 KB). If the request
	// body for your web requests never exceeds 8192 bytes, you can create a size
	// constraint condition and block requests that have a request body greater than
	// 8192 bytes. If you choose URI for the value of Part of the request to filter on,
	// the slash (/) in the URI counts as one character. For example, the URI /logo.jpg
	// is nine characters long.
	SizeConstraintStatement *SizeConstraintStatement
}

type Tag ¶

type Tag struct {

	// Part of the key:value pair that defines a tag. You can use a tag value to
	// describe a specific value within a category, such as "companyA" or "companyB."
	// Tag values are case-sensitive.
	//
	// This member is required.
	Value *string

	// Part of the key:value pair that defines a tag. You can use a tag key to describe
	// a category of information, such as "customer." Tag keys are case-sensitive.
	//
	// This member is required.
	Key *string
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A tag associated with an AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing or other management. Typically, the tag key represents a category, such as "environment", and the tag value represents a specific value within that category, such as "test," "development," or "production". Or you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. You can tag the AWS resources that you manage through AWS WAF: web ACLs, rule groups, IP sets, and regex pattern sets. You can't manage or view tags through the AWS WAF console.

type TagInfoForResource ¶

type TagInfoForResource struct {

	// The Amazon Resource Name (ARN) of the resource.
	ResourceARN *string

	// The array of Tag () objects defined for the resource.
	TagList []*Tag
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). The collection of tagging definitions for an AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing or other management. Typically, the tag key represents a category, such as "environment", and the tag value represents a specific value within that category, such as "test," "development," or "production". Or you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. You can tag the AWS resources that you manage through AWS WAF: web ACLs, rule groups, IP sets, and regex pattern sets. You can't manage or view tags through the AWS WAF console.

type TextTransformation ¶

type TextTransformation struct {

	// Sets the relative processing order for multiple transformations that are defined
	// for a rule statement. AWS WAF processes all transformations, from lowest
	// priority to highest, before inspecting the transformed content. The priorities
	// don't need to be consecutive, but they must all be different.
	//
	// This member is required.
	Priority *int32

	// You can specify the following transformation types: CMD_LINE When you're
	// concerned that attackers are injecting an operating system command line command
	// and using unusual formatting to disguise some or all of the command, use this
	// option to perform the following transformations:
	//
	//     * Delete the following
	// characters: \ " ' ^
	//
	//     * Delete spaces before the following characters: / (
	//
	//
	// * Replace the following characters with a space: , ;
	//
	//     * Replace multiple
	// spaces with one space
	//
	//     * Convert uppercase letters (A-Z) to lowercase
	// (a-z)
	//
	//     <p> <b>COMPRESS_WHITE_SPACE</b> </p> <p>Use this option to replace
	// the following characters with a space character (decimal 32):</p> <ul> <li>
	// <p>\f, formfeed, decimal 12</p> </li> <li> <p>\t, tab, decimal 9</p> </li> <li>
	// <p>\n, newline, decimal 10</p> </li> <li> <p>\r, carriage return, decimal 13</p>
	// </li> <li> <p>\v, vertical tab, decimal 11</p> </li> <li> <p>non-breaking space,
	// decimal 160</p> </li> </ul> <p> <code>COMPRESS_WHITE_SPACE</code> also replaces
	// multiple spaces with one space.</p> <p> <b>HTML_ENTITY_DECODE</b> </p> <p>Use
	// this option to replace HTML-encoded characters with unencoded characters.
	// <code>HTML_ENTITY_DECODE</code> performs the following operations:</p> <ul> <li>
	// <p>Replaces <code>(ampersand)quot;</code> with <code>"</code> </p> </li> <li>
	// <p>Replaces <code>(ampersand)nbsp;</code> with a non-breaking space, decimal
	// 160</p> </li> <li> <p>Replaces <code>(ampersand)lt;</code> with a "less than"
	// symbol</p> </li> <li> <p>Replaces <code>(ampersand)gt;</code> with
	// <code>></code> </p> </li> <li> <p>Replaces characters that are represented in
	// hexadecimal format, <code>(ampersand)#xhhhh;</code>, with the corresponding
	// characters</p> </li> <li> <p>Replaces characters that are represented in decimal
	// format, <code>(ampersand)#nnnn;</code>, with the corresponding characters</p>
	// </li> </ul> <p> <b>LOWERCASE</b> </p> <p>Use this option to convert uppercase
	// letters (A-Z) to lowercase (a-z).</p> <p> <b>URL_DECODE</b> </p> <p>Use this
	// option to decode a URL-encoded value.</p> <p> <b>NONE</b> </p> <p>Specify
	// <code>NONE</code> if you don't want any text transformations.</p>
	//
	// This member is required.
	Type TextTransformationType
}

type TextTransformationType ¶

type TextTransformationType string

const (
	TextTransformationTypeNone                 TextTransformationType = "NONE"
	TextTransformationTypeCompress_white_space TextTransformationType = "COMPRESS_WHITE_SPACE"
	TextTransformationTypeHtml_entity_decode   TextTransformationType = "HTML_ENTITY_DECODE"
	TextTransformationTypeLowercase            TextTransformationType = "LOWERCASE"
	TextTransformationTypeCmd_line             TextTransformationType = "CMD_LINE"
	TextTransformationTypeUrl_decode           TextTransformationType = "URL_DECODE"
)

Enum values for TextTransformationType

type TimeWindow ¶

type TimeWindow struct {

	// The beginning of the time range from which you want GetSampledRequests to return
	// a sample of the requests that your AWS resource received. You must specify the
	// times in Coordinated Universal Time (UTC) format. UTC format includes the
	// special designator, Z. For example, "2016-09-27T14:50Z". You can specify any
	// time range in the previous three hours.
	//
	// This member is required.
	StartTime *time.Time

	// The end of the time range from which you want GetSampledRequests to return a
	// sample of the requests that your AWS resource received. You must specify the
	// times in Coordinated Universal Time (UTC) format. UTC format includes the
	// special designator, Z. For example, "2016-09-27T14:50Z". You can specify any
	// time range in the previous three hours.
	//
	// This member is required.
	EndTime *time.Time
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). In a GetSampledRequests () request, the StartTime and EndTime objects specify the time range for which you want AWS WAF to return a sample of web requests. You must specify the times in Coordinated Universal Time (UTC) format. UTC format includes the special designator, Z. For example, "2016-09-27T14:50Z". You can specify any time range in the previous three hours. In a GetSampledRequests () response, the StartTime and EndTime objects specify the time range for which AWS WAF actually returned a sample of web requests. AWS WAF gets the specified number of requests from among the first 5,000 requests that your AWS resource receives during the specified time period. If your resource receives more than 5,000 requests during that period, AWS WAF stops sampling after the 5,000th request. In that case, EndTime is the time that AWS WAF received the 5,000th request.

type UriPath ¶

type UriPath struct {
}

type VisibilityConfig ¶

type VisibilityConfig struct {

	// A boolean indicating whether AWS WAF should store a sampling of the web requests
	// that match the rules. You can view the sampled requests through the AWS WAF
	// console.
	//
	// This member is required.
	SampledRequestsEnabled *bool

	// A boolean indicating whether the associated resource sends metrics to
	// CloudWatch. For the list of available metrics, see AWS WAF Metrics
	// (https://docs.aws.amazon.com/waf/latest/developerguide/monitoring-cloudwatch.html#waf-metrics).
	//
	// This member is required.
	CloudWatchMetricsEnabled *bool

	// A name of the CloudWatch metric. The name can contain only the characters: A-Z,
	// a-z, 0-9, - (hyphen), and _ (underscore). The name can be from one to 128
	// characters long. It can't contain whitespace or metric names reserved for AWS
	// WAF, for example "All" and "Default_Action." You can't change a MetricName after
	// you create a VisibilityConfig.
	//
	// This member is required.
	MetricName *string
}

type WAFAssociatedItemException ¶

type WAFAssociatedItemException struct {
	Message *string
}

AWS WAF couldn’t perform the operation because your resource is being used by another resource or it’s associated with another resource.

func (*WAFAssociatedItemException) Error ¶

func (e *WAFAssociatedItemException) Error() string

func (*WAFAssociatedItemException) ErrorCode ¶

func (e *WAFAssociatedItemException) ErrorCode() string

func (*WAFAssociatedItemException) ErrorFault ¶

func (e *WAFAssociatedItemException) ErrorFault() smithy.ErrorFault

func (*WAFAssociatedItemException) ErrorMessage ¶

func (e *WAFAssociatedItemException) ErrorMessage() string

type WAFDuplicateItemException ¶

type WAFDuplicateItemException struct {
	Message *string
}

AWS WAF couldn’t perform the operation because the resource that you tried to save is a duplicate of an existing one.

func (*WAFDuplicateItemException) Error ¶

func (e *WAFDuplicateItemException) Error() string

func (*WAFDuplicateItemException) ErrorCode ¶

func (e *WAFDuplicateItemException) ErrorCode() string

func (*WAFDuplicateItemException) ErrorFault ¶

func (e *WAFDuplicateItemException) ErrorFault() smithy.ErrorFault

func (*WAFDuplicateItemException) ErrorMessage ¶

func (e *WAFDuplicateItemException) ErrorMessage() string

type WAFInternalErrorException ¶

type WAFInternalErrorException struct {
	Message *string
}

Your request is valid, but AWS WAF couldn’t perform the operation because of a system problem. Retry your request.

func (*WAFInternalErrorException) Error ¶

func (e *WAFInternalErrorException) Error() string

func (*WAFInternalErrorException) ErrorCode ¶

func (e *WAFInternalErrorException) ErrorCode() string

func (*WAFInternalErrorException) ErrorFault ¶

func (e *WAFInternalErrorException) ErrorFault() smithy.ErrorFault

func (*WAFInternalErrorException) ErrorMessage ¶

func (e *WAFInternalErrorException) ErrorMessage() string

type WAFInvalidOperationException ¶

type WAFInvalidOperationException struct {
	Message *string
}

The operation isn't valid.

func (*WAFInvalidOperationException) Error ¶

func (e *WAFInvalidOperationException) Error() string

func (*WAFInvalidOperationException) ErrorCode ¶

func (e *WAFInvalidOperationException) ErrorCode() string

func (*WAFInvalidOperationException) ErrorFault ¶

func (e *WAFInvalidOperationException) ErrorFault() smithy.ErrorFault

func (*WAFInvalidOperationException) ErrorMessage ¶

func (e *WAFInvalidOperationException) ErrorMessage() string

type WAFInvalidParameterException ¶

type WAFInvalidParameterException struct {
	Message *string

	Reason    *string
	Field     ParameterExceptionField
	Parameter *string
}

The operation failed because AWS WAF didn't recognize a parameter in the request. For example:

You specified an invalid parameter name or value.

* Your nested statement isn't valid. You might have tried to nest a statement that can’t be nested.

You tried to update a WebACL with a DefaultAction

that isn't among the types available at DefaultAction ().

Your request

references an ARN that is malformed, or corresponds to a resource with which a Web ACL cannot be associated.

func (*WAFInvalidParameterException) Error ¶

func (e *WAFInvalidParameterException) Error() string

func (*WAFInvalidParameterException) ErrorCode ¶

func (e *WAFInvalidParameterException) ErrorCode() string

func (*WAFInvalidParameterException) ErrorFault ¶

func (e *WAFInvalidParameterException) ErrorFault() smithy.ErrorFault

func (*WAFInvalidParameterException) ErrorMessage ¶

func (e *WAFInvalidParameterException) ErrorMessage() string

type WAFInvalidPermissionPolicyException ¶

type WAFInvalidPermissionPolicyException struct {
	Message *string
}

The operation failed because the specified policy isn't in the proper format. The policy specifications must conform to the following: <ul> <li> The policy must be composed using IAM Policy version 2012-10-17 or version 2015-01-01. </li> <li> The policy must include specifications for <code>Effect</code>, <code>Action</code>, and <code>Principal</code>. </li> <li> <code>Effect</code> must specify <code>Allow</code>. </li> <li> <code>Action</code> must specify <code>wafv2:CreateWebACL</code>, <code>wafv2:UpdateWebACL</code>, and <code>wafv2:PutFirewallManagerRuleGroups</code>. AWS WAF rejects any extra actions or wildcard actions in the policy. </li> <li> The policy must not include a <code>Resource</code> parameter. </li> </ul> For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html">IAM Policies</a>.

func (*WAFInvalidPermissionPolicyException) Error ¶

func (e *WAFInvalidPermissionPolicyException) Error() string

func (*WAFInvalidPermissionPolicyException) ErrorCode ¶

func (e *WAFInvalidPermissionPolicyException) ErrorCode() string

func (*WAFInvalidPermissionPolicyException) ErrorFault ¶

func (e *WAFInvalidPermissionPolicyException) ErrorFault() smithy.ErrorFault

func (*WAFInvalidPermissionPolicyException) ErrorMessage ¶

func (e *WAFInvalidPermissionPolicyException) ErrorMessage() string

type WAFInvalidResourceException ¶

type WAFInvalidResourceException struct {
	Message *string
}

AWS WAF couldn’t perform the operation because the resource that you requested isn’t valid. Check the resource, and try again.

func (*WAFInvalidResourceException) Error ¶

func (e *WAFInvalidResourceException) Error() string

func (*WAFInvalidResourceException) ErrorCode ¶

func (e *WAFInvalidResourceException) ErrorCode() string

func (*WAFInvalidResourceException) ErrorFault ¶

func (e *WAFInvalidResourceException) ErrorFault() smithy.ErrorFault

func (*WAFInvalidResourceException) ErrorMessage ¶

func (e *WAFInvalidResourceException) ErrorMessage() string

type WAFLimitsExceededException ¶

type WAFLimitsExceededException struct {
	Message *string
}

AWS WAF couldn’t perform the operation because you exceeded your resource limit. For example, the maximum number of WebACL objects that you can create for an AWS account. For more information, see Limits (https://docs.aws.amazon.com/waf/latest/developerguide/limits.html) in the AWS WAF Developer Guide.

func (*WAFLimitsExceededException) Error ¶

func (e *WAFLimitsExceededException) Error() string

func (*WAFLimitsExceededException) ErrorCode ¶

func (e *WAFLimitsExceededException) ErrorCode() string

func (*WAFLimitsExceededException) ErrorFault ¶

func (e *WAFLimitsExceededException) ErrorFault() smithy.ErrorFault

func (*WAFLimitsExceededException) ErrorMessage ¶

func (e *WAFLimitsExceededException) ErrorMessage() string

type WAFNonexistentItemException ¶

type WAFNonexistentItemException struct {
	Message *string
}

AWS WAF couldn’t perform the operation because your resource doesn’t exist.

func (*WAFNonexistentItemException) Error ¶

func (e *WAFNonexistentItemException) Error() string

func (*WAFNonexistentItemException) ErrorCode ¶

func (e *WAFNonexistentItemException) ErrorCode() string

func (*WAFNonexistentItemException) ErrorFault ¶

func (e *WAFNonexistentItemException) ErrorFault() smithy.ErrorFault

func (*WAFNonexistentItemException) ErrorMessage ¶

func (e *WAFNonexistentItemException) ErrorMessage() string

type WAFOptimisticLockException ¶

type WAFOptimisticLockException struct {
	Message *string
}

AWS WAF couldn’t save your changes because you tried to update or delete a resource that has changed since you last retrieved it. Get the resource again, make any changes you need to make to the new copy, and retry your operation.

func (*WAFOptimisticLockException) Error ¶

func (e *WAFOptimisticLockException) Error() string

func (*WAFOptimisticLockException) ErrorCode ¶

func (e *WAFOptimisticLockException) ErrorCode() string

func (*WAFOptimisticLockException) ErrorFault ¶

func (e *WAFOptimisticLockException) ErrorFault() smithy.ErrorFault

func (*WAFOptimisticLockException) ErrorMessage ¶

func (e *WAFOptimisticLockException) ErrorMessage() string

type WAFServiceLinkedRoleErrorException ¶

type WAFServiceLinkedRoleErrorException struct {
	Message *string
}

AWS WAF is not able to access the service linked role. This can be caused by a previous PutLoggingConfiguration request, which can lock the service linked role for about 20 seconds. Please try your request again. The service linked role can also be locked by a previous DeleteServiceLinkedRole request, which can lock the role for 15 minutes or more. If you recently made a call to DeleteServiceLinkedRole, wait at least 15 minutes and try the request again. If you receive this same exception again, you will have to wait additional time until the role is unlocked.

func (*WAFServiceLinkedRoleErrorException) Error ¶

func (e *WAFServiceLinkedRoleErrorException) Error() string

func (*WAFServiceLinkedRoleErrorException) ErrorCode ¶

func (e *WAFServiceLinkedRoleErrorException) ErrorCode() string

func (*WAFServiceLinkedRoleErrorException) ErrorFault ¶

func (e *WAFServiceLinkedRoleErrorException) ErrorFault() smithy.ErrorFault

func (*WAFServiceLinkedRoleErrorException) ErrorMessage ¶

func (e *WAFServiceLinkedRoleErrorException) ErrorMessage() string

type WAFSubscriptionNotFoundException ¶

type WAFSubscriptionNotFoundException struct {
	Message *string
}

func (*WAFSubscriptionNotFoundException) Error ¶

func (e *WAFSubscriptionNotFoundException) Error() string

func (*WAFSubscriptionNotFoundException) ErrorCode ¶

func (e *WAFSubscriptionNotFoundException) ErrorCode() string

func (*WAFSubscriptionNotFoundException) ErrorFault ¶

func (e *WAFSubscriptionNotFoundException) ErrorFault() smithy.ErrorFault

func (*WAFSubscriptionNotFoundException) ErrorMessage ¶

func (e *WAFSubscriptionNotFoundException) ErrorMessage() string

type WAFTagOperationException ¶

type WAFTagOperationException struct {
	Message *string
}

An error occurred during the tagging operation. Retry your request.

func (*WAFTagOperationException) Error ¶

func (e *WAFTagOperationException) Error() string

func (*WAFTagOperationException) ErrorCode ¶

func (e *WAFTagOperationException) ErrorCode() string

func (*WAFTagOperationException) ErrorFault ¶

func (e *WAFTagOperationException) ErrorFault() smithy.ErrorFault

func (*WAFTagOperationException) ErrorMessage ¶

func (e *WAFTagOperationException) ErrorMessage() string

type WAFTagOperationInternalErrorException ¶

type WAFTagOperationInternalErrorException struct {
	Message *string
}

AWS WAF couldn’t perform your tagging operation because of an internal error. Retry your request.

func (*WAFTagOperationInternalErrorException) Error ¶

func (e *WAFTagOperationInternalErrorException) Error() string

func (*WAFTagOperationInternalErrorException) ErrorCode ¶

func (e *WAFTagOperationInternalErrorException) ErrorCode() string

func (*WAFTagOperationInternalErrorException) ErrorFault ¶

func (e *WAFTagOperationInternalErrorException) ErrorFault() smithy.ErrorFault

func (*WAFTagOperationInternalErrorException) ErrorMessage ¶

func (e *WAFTagOperationInternalErrorException) ErrorMessage() string

type WAFUnavailableEntityException ¶

type WAFUnavailableEntityException struct {
	Message *string
}

AWS WAF couldn’t retrieve the resource that you requested. Retry your request.

func (*WAFUnavailableEntityException) Error ¶

func (e *WAFUnavailableEntityException) Error() string

func (*WAFUnavailableEntityException) ErrorCode ¶

func (e *WAFUnavailableEntityException) ErrorCode() string

func (*WAFUnavailableEntityException) ErrorFault ¶

func (e *WAFUnavailableEntityException) ErrorFault() smithy.ErrorFault

func (*WAFUnavailableEntityException) ErrorMessage ¶

func (e *WAFUnavailableEntityException) ErrorMessage() string

type WebACL ¶

type WebACL struct {

	// The name of the Web ACL. You cannot change the name of a Web ACL after you
	// create it.
	//
	// This member is required.
	Name *string

	// The last set of rules for AWS WAF to process in the web ACL. This is defined in
	// an AWS Firewall Manager WAF policy and contains only rule group references. You
	// can't alter these. Any rules and rule groups that you define for the web ACL are
	// prioritized before these. In the Firewall Manager WAF policy, the Firewall
	// Manager administrator can define a set of rule groups to run first in the web
	// ACL and a set of rule groups to run last. Within each set, the administrator
	// prioritizes the rule groups, to determine their relative processing order.
	PostProcessFirewallManagerRuleGroups []*FirewallManagerRuleGroup

	// The action to perform if none of the Rules contained in the WebACL match.
	//
	// This member is required.
	DefaultAction *DefaultAction

	// Defines and enables Amazon CloudWatch metrics and web request sample collection.
	//
	// This member is required.
	VisibilityConfig *VisibilityConfig

	// A unique identifier for the WebACL. This ID is returned in the responses to
	// create and list commands. You use this ID to do things like get, update, and
	// delete a WebACL.
	//
	// This member is required.
	Id *string

	// A description of the Web ACL that helps with identification. You cannot change
	// the description of a Web ACL after you create it.
	Description *string

	// The web ACL capacity units (WCUs) currently being used by this web ACL. AWS WAF
	// uses WCUs to calculate and control the operating resources that are used to run
	// your rules, rule groups, and web ACLs. AWS WAF calculates capacity differently
	// for each rule type, to reflect the relative cost of each rule. Simple rules that
	// cost little to run use fewer WCUs than more complex rules that use more
	// processing power. Rule group capacity is fixed at creation, which helps users
	// plan their web ACL WCU usage when they use a rule group. The WCU limit for web
	// ACLs is 1,500.
	Capacity *int64

	// The first set of rules for AWS WAF to process in the web ACL. This is defined in
	// an AWS Firewall Manager WAF policy and contains only rule group references. You
	// can't alter these. Any rules and rule groups that you define for the web ACL are
	// prioritized after these. In the Firewall Manager WAF policy, the Firewall
	// Manager administrator can define a set of rule groups to run first in the web
	// ACL and a set of rule groups to run last. Within each set, the administrator
	// prioritizes the rule groups, to determine their relative processing order.
	PreProcessFirewallManagerRuleGroups []*FirewallManagerRuleGroup

	// Indicates whether this web ACL is managed by AWS Firewall Manager. If true, then
	// only AWS Firewall Manager can delete the web ACL or any Firewall Manager rule
	// groups in the web ACL.
	ManagedByFirewallManager *bool

	// The Amazon Resource Name (ARN) of the Web ACL that you want to associate with
	// the resource.
	//
	// This member is required.
	ARN *string

	// The Rule () statements used to identify the web requests that you want to allow,
	// block, or count. Each rule includes one top-level statement that AWS WAF uses to
	// identify matching web requests, and parameters that govern how AWS WAF handles
	// them.
	Rules []*Rule
}

This is the latest version of AWS WAF, named AWS WAFV2, released in November, 2019. For information, including how to migrate your AWS WAF resources from the prior release, see the AWS WAF Developer Guide (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). A Web ACL defines a collection of rules to use to inspect and control web requests. Each rule has an action defined (allow, block, or count) for requests that match the statement of the rule. In the Web ACL, you assign a default action to take (allow, block) for any request that does not match any of the rules. The rules in a Web ACL can be a combination of the types Rule (), RuleGroup (), and managed rule group. You can associate a Web ACL with one or more AWS resources to protect. The resources can be Amazon CloudFront, an Amazon API Gateway API, or an Application Load Balancer.

type WebACLSummary ¶

type WebACLSummary struct {

	// The name of the Web ACL. You cannot change the name of a Web ACL after you
	// create it.
	Name *string

	// A token used for optimistic locking. AWS WAF returns a token to your get and
	// list requests, to mark the state of the entity at the time of the request. To
	// make changes to the entity associated with the token, you provide the token to
	// operations like update and delete. AWS WAF uses the token to ensure that no
	// changes have been made to the entity since you last retrieved it. If a change
	// has been made, the update fails with a WAFOptimisticLockException. If this
	// happens, perform another get, and use the new token returned by that operation.
	LockToken *string

	// A description of the Web ACL that helps with identification. You cannot change
	// the description of a Web ACL after you create it.
	Description *string

	// The Amazon Resource Name (ARN) of the entity.
	ARN *string

	// The unique identifier for the Web ACL. This ID is returned in the responses to
	// create and list commands. You provide it to operations like update and delete.
	Id *string
}

type XssMatchStatement ¶

type XssMatchStatement struct {

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass detection. If you specify one or more
	// transformations in a rule statement, AWS WAF performs all transformations on the
	// content of the request component identified by FieldToMatch, starting from the
	// lowest priority setting, before inspecting the content for a match.
	//
	// This member is required.
	TextTransformations []*TextTransformation

	// The part of a web request that you want AWS WAF to inspect. For more
	// information, see FieldToMatch ().
	//
	// This member is required.
	FieldToMatch *FieldToMatch
}

Source Files ¶

enums.go errors.go types.go

Version: v0.26.0
Published: Oct 1, 2020
Platform: js/wasm
Imports: 3 packages
Last checked: 7 hours ago –

Tools for package owners.

?	: This menu
/	: Search site
f	: Jump to identifier
g then g	: Go to top of page
g then b	: Go to end of page
G	: Go to end of page
g then i	: Go to index
g then e	: Go to examples