type AccessDeniedException struct {
	Message *string
}

type Filter struct {

	// The name of the parameter that you want to use to filter objects. The valid
	// values for Name depend on the action that you're including the filter in,
	// ListResolverEndpoints
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ListResolverEndpoints.html),
	// ListResolverRules
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ListResolverRules.html),
	// ListResolverRuleAssociations
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ListResolverRuleAssociations.html),
	// ListResolverQueryLogConfigs
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ListResolverQueryLogConfigs.html),
	// or ListResolverQueryLogConfigAssociations
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ListResolverQueryLogConfigAssociations.html).
	// In early versions of Resolver, values for Name were listed as uppercase, with
	// underscore (_) delimiters. For example, CreatorRequestId was originally listed
	// as CREATOR_REQUEST_ID. Uppercase values for Name are still supported.
	// ListResolverEndpoints Valid values for Name include the following:
	//
	// *
	// CreatorRequestId: The value that you specified when you created the Resolver
	// endpoint.
	//
	// * Direction: Whether you want to return inbound or outbound Resolver
	// endpoints. If you specify DIRECTION for Name, specify INBOUND or OUTBOUND for
	// Values.
	//
	// * HostVpcId: The ID of the VPC that inbound DNS queries pass through on
	// the way from your network to your VPCs in a region, or the VPC that outbound
	// queries pass through on the way from your VPCs to your network. In a
	// CreateResolverEndpoint
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_CreateResolverEndpoint.html)
	// request, SubnetId indirectly identifies the VPC. In a GetResolverEndpoint
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_GetResolverEndpoint.html)
	// request, the VPC ID for a Resolver endpoint is returned in the HostVPCId
	// element.
	//
	// * IpAddressCount: The number of IP addresses that you have associated
	// with the Resolver endpoint.
	//
	// * Name: The name of the Resolver endpoint.
	//
	// *
	// SecurityGroupIds: The IDs of the VPC security groups that you specified when you
	// created the Resolver endpoint.
	//
	// * Status: The status of the Resolver endpoint.
	// If you specify Status for Name, specify one of the following status codes for
	// Values: CREATING, OPERATIONAL, UPDATING, AUTO_RECOVERING, ACTION_NEEDED, or
	// DELETING. For more information, see Status in ResolverEndpoint
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ResolverEndpoint.html).
	//
	// ListResolverRules
	// Valid values for Name include the following:
	//
	// * CreatorRequestId: The value that
	// you specified when you created the Resolver rule.
	//
	// * DomainName: The domain name
	// for which Resolver is forwarding DNS queries to your network. In the value that
	// you specify for Values, include a trailing dot (.) after the domain name. For
	// example, if the domain name is example.com, specify the following value. Note
	// the "." after com: example.com.
	//
	// * Name: The name of the Resolver rule.
	//
	// *
	// ResolverEndpointId: The ID of the Resolver endpoint that the Resolver rule is
	// associated with. You can filter on the Resolver endpoint only for rules that
	// have a value of FORWARD for RuleType.
	//
	// * Status: The status of the Resolver
	// rule. If you specify Status for Name, specify one of the following status codes
	// for Values: COMPLETE, DELETING, UPDATING, or FAILED.
	//
	// * Type: The type of the
	// Resolver rule. If you specify TYPE for Name, specify FORWARD or SYSTEM for
	// Values.
	//
	// ListResolverRuleAssociations Valid values for Name include the
	// following:
	//
	// * Name: The name of the Resolver rule association.
	//
	// *
	// ResolverRuleId: The ID of the Resolver rule that is associated with one or more
	// VPCs.
	//
	// * Status: The status of the Resolver rule association. If you specify
	// Status for Name, specify one of the following status codes for Values: CREATING,
	// COMPLETE, DELETING, or FAILED.
	//
	// * VPCId: The ID of the VPC that the Resolver
	// rule is associated with.
	//
	// ListResolverQueryLogConfigs Valid values for Name
	// include the following:
	//
	// * Arn: The ARN for the query logging configuration.
	//
	// *
	// AssociationCount: The number of VPCs that are associated with the query logging
	// configuration.
	//
	// * CreationTime: The date and time that the query logging
	// configuration was created, in Unix time format and Coordinated Universal Time
	// (UTC).
	//
	// * CreatorRequestId: A unique string that identifies the request that
	// created the query logging configuration.
	//
	// * Destination: The AWS service that
	// you want to forward query logs to. Valid values include the following:
	//
	// * S3
	//
	// *
	// CloudWatchLogs
	//
	// * KinesisFirehose
	//
	// * DestinationArn: The ARN of the location
	// that Resolver is sending query logs to. This value can be the ARN for an S3
	// bucket, a CloudWatch Logs log group, or a Kinesis Data Firehose delivery
	// stream.
	//
	// * Id: The ID of the query logging configuration
	//
	// * Name: The name of
	// the query logging configuration
	//
	// * OwnerId: The AWS account ID for the account
	// that created the query logging configuration.
	//
	// * ShareStatus: An indication of
	// whether the query logging configuration is shared with other AWS accounts, or
	// was shared with the current account by another AWS account. Valid values
	// include: NOT_SHARED, SHARED_WITH_ME, or SHARED_BY_ME.
	//
	// * Status: The status of
	// the query logging configuration. If you specify Status for Name, specify the
	// applicable status code for Values: CREATING, CREATED, DELETING, or FAILED. For
	// more information, see Status
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ResolverQueryLogConfig.html#Route53Resolver-Type-route53resolver_ResolverQueryLogConfig-Status).
	//
	// ListResolverQueryLogConfigAssociations
	// Valid values for Name include the following:
	//
	// * CreationTime: The date and time
	// that the VPC was associated with the query logging configuration, in Unix time
	// format and Coordinated Universal Time (UTC).
	//
	// * Error: If the value of Status is
	// FAILED, specify the cause: DESTINATION_NOT_FOUND or ACCESS_DENIED.
	//
	// * Id: The ID
	// of the query logging association.
	//
	// * ResolverQueryLogConfigId: The ID of the
	// query logging configuration that a VPC is associated with.
	//
	// * ResourceId: The ID
	// of the Amazon VPC that is associated with the query logging configuration.
	//
	// *
	// Status: The status of the query logging association. If you specify Status for
	// Name, specify the applicable status code for Values: CREATING, CREATED,
	// DELETING, or FAILED. For more information, see Status
	// (https://docs.aws.amazon.com/API_route53resolver_ResolverQueryLogConfigAssociation.html#Route53Resolver-Type-route53resolver_ResolverQueryLogConfigAssociation-Status).
	Name *string

	// When you're using a List operation and you want the operation to return a subset
	// of objects, such as Resolver endpoints or Resolver rules, the value of the
	// parameter that you want to use to filter objects. For example, to list only
	// inbound Resolver endpoints, specify Direction for Name and specify INBOUND for
	// Values.
	Values []string
}

type InternalServiceErrorException struct {
	Message *string
}

type InvalidNextTokenException struct {
	Message *string
}

type InvalidParameterException struct {
	Message *string

	FieldName *string
}

type InvalidPolicyDocument struct {
	Message *string
}

type InvalidRequestException struct {
	Message *string
}

type InvalidTagException struct {
	Message *string
}

type IpAddressRequest struct {

	// The ID of the subnet that contains the IP address.
	//
	// This member is required.
	SubnetId *string

	// The IP address that you want to use for DNS queries.
	Ip *string
}

type IpAddressResponse struct {

	// The date and time that the IP address was created, in Unix time format and
	// Coordinated Universal Time (UTC).
	CreationTime *string

	// One IP address that the Resolver endpoint uses for DNS queries.
	Ip *string

	// The ID of one IP address.
	IpId *string

	// The date and time that the IP address was last modified, in Unix time format and
	// Coordinated Universal Time (UTC).
	ModificationTime *string

	// A status code that gives the current status of the request.
	Status IpAddressStatus

	// A message that provides additional information about the status of the request.
	StatusMessage *string

	// The ID of one subnet.
	SubnetId *string
}

type IpAddressStatus string

const (
	IpAddressStatusCreating               IpAddressStatus = "CREATING"
	IpAddressStatusFailedCreation         IpAddressStatus = "FAILED_CREATION"
	IpAddressStatusAttaching              IpAddressStatus = "ATTACHING"
	IpAddressStatusAttached               IpAddressStatus = "ATTACHED"
	IpAddressStatusRemapDetaching         IpAddressStatus = "REMAP_DETACHING"
	IpAddressStatusRemapAttaching         IpAddressStatus = "REMAP_ATTACHING"
	IpAddressStatusDetaching              IpAddressStatus = "DETACHING"
	IpAddressStatusFailedResourceGone     IpAddressStatus = "FAILED_RESOURCE_GONE"
	IpAddressStatusDeleting               IpAddressStatus = "DELETING"
	IpAddressStatusDeleteFailedFasExpired IpAddressStatus = "DELETE_FAILED_FAS_EXPIRED"
)

type IpAddressUpdate struct {

	// The new IP address.
	Ip *string

	// Only when removing an IP address from a Resolver endpoint: The ID of the IP
	// address that you want to remove. To get this ID, use GetResolverEndpoint
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_GetResolverEndpoint.html).
	IpId *string

	// The ID of the subnet that includes the IP address that you want to update. To
	// get this ID, use GetResolverEndpoint
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_GetResolverEndpoint.html).
	SubnetId *string
}

type LimitExceededException struct {
	Message *string

	ResourceType *string
}

type ResolverEndpoint struct {

	// The ARN (Amazon Resource Name) for the Resolver endpoint.
	Arn *string

	// The date and time that the endpoint was created, in Unix time format and
	// Coordinated Universal Time (UTC).
	CreationTime *string

	// A unique string that identifies the request that created the Resolver endpoint.
	// The CreatorRequestId allows failed requests to be retried without the risk of
	// executing the operation twice.
	CreatorRequestId *string

	// Indicates whether the Resolver endpoint allows inbound or outbound DNS
	// queries:
	//
	// * INBOUND: allows DNS queries to your VPC from your network
	//
	// *
	// OUTBOUND: allows DNS queries from your VPC to your network
	Direction ResolverEndpointDirection

	// The ID of the VPC that you want to create the Resolver endpoint in.
	HostVPCId *string

	// The ID of the Resolver endpoint.
	Id *string

	// The number of IP addresses that the Resolver endpoint can use for DNS queries.
	IpAddressCount *int32

	// The date and time that the endpoint was last modified, in Unix time format and
	// Coordinated Universal Time (UTC).
	ModificationTime *string

	// The name that you assigned to the Resolver endpoint when you submitted a
	// CreateResolverEndpoint
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_CreateResolverEndpoint.html)
	// request.
	Name *string

	// The ID of one or more security groups that control access to this VPC. The
	// security group must include one or more inbound rules (for inbound endpoints) or
	// outbound rules (for outbound endpoints). Inbound and outbound rules must allow
	// TCP and UDP access. For inbound access, open port 53. For outbound access, open
	// the port that you're using for DNS queries on your network.
	SecurityGroupIds []string

	// A code that specifies the current status of the Resolver endpoint. Valid values
	// include the following:
	//
	// * CREATING: Resolver is creating and configuring one or
	// more Amazon VPC network interfaces for this endpoint.
	//
	// * OPERATIONAL: The Amazon
	// VPC network interfaces for this endpoint are correctly configured and able to
	// pass inbound or outbound DNS queries between your network and Resolver.
	//
	// *
	// UPDATING: Resolver is associating or disassociating one or more network
	// interfaces with this endpoint.
	//
	// * AUTO_RECOVERING: Resolver is trying to recover
	// one or more of the network interfaces that are associated with this endpoint.
	// During the recovery process, the endpoint functions with limited capacity
	// because of the limit on the number of DNS queries per IP address (per network
	// interface). For the current limit, see Limits on Route 53 Resolver
	// (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html#limits-api-entities-resolver).
	//
	// *
	// ACTION_NEEDED: This endpoint is unhealthy, and Resolver can't automatically
	// recover it. To resolve the problem, we recommend that you check each IP address
	// that you associated with the endpoint. For each IP address that isn't available,
	// add another IP address and then delete the IP address that isn't available. (An
	// endpoint must always include at least two IP addresses.) A status of
	// ACTION_NEEDED can have a variety of causes. Here are two common causes:
	//
	// * One
	// or more of the network interfaces that are associated with the endpoint were
	// deleted using Amazon VPC.
	//
	// * The network interface couldn't be created for some
	// reason that's outside the control of Resolver.
	//
	// * DELETING: Resolver is deleting
	// this endpoint and the associated network interfaces.
	Status ResolverEndpointStatus

	// A detailed description of the status of the Resolver endpoint.
	StatusMessage *string
}

type ResolverEndpointDirection string

const (
	ResolverEndpointDirectionInbound  ResolverEndpointDirection = "INBOUND"
	ResolverEndpointDirectionOutbound ResolverEndpointDirection = "OUTBOUND"
)

type ResolverEndpointStatus string

const (
	ResolverEndpointStatusCreating       ResolverEndpointStatus = "CREATING"
	ResolverEndpointStatusOperational    ResolverEndpointStatus = "OPERATIONAL"
	ResolverEndpointStatusUpdating       ResolverEndpointStatus = "UPDATING"
	ResolverEndpointStatusAutoRecovering ResolverEndpointStatus = "AUTO_RECOVERING"
	ResolverEndpointStatusActionNeeded   ResolverEndpointStatus = "ACTION_NEEDED"
	ResolverEndpointStatusDeleting       ResolverEndpointStatus = "DELETING"
)

type ResolverQueryLogConfig struct {

	// The ARN for the query logging configuration.
	Arn *string

	// The number of VPCs that are associated with the query logging configuration.
	AssociationCount int32

	// The date and time that the query logging configuration was created, in Unix time
	// format and Coordinated Universal Time (UTC).
	CreationTime *string

	// A unique string that identifies the request that created the query logging
	// configuration. The CreatorRequestId allows failed requests to be retried without
	// the risk of executing the operation twice.
	CreatorRequestId *string

	// The ARN of the resource that you want Resolver to send query logs: an Amazon S3
	// bucket, a CloudWatch Logs log group, or a Kinesis Data Firehose delivery stream.
	DestinationArn *string

	// The ID for the query logging configuration.
	Id *string

	// The name of the query logging configuration.
	Name *string

	// The AWS account ID for the account that created the query logging configuration.
	OwnerId *string

	// An indication of whether the query logging configuration is shared with other
	// AWS accounts, or was shared with the current account by another AWS account.
	// Sharing is configured through AWS Resource Access Manager (AWS RAM).
	ShareStatus ShareStatus

	// The status of the specified query logging configuration. Valid values include
	// the following:
	//
	// * CREATING: Resolver is creating the query logging
	// configuration.
	//
	// * CREATED: The query logging configuration was successfully
	// created. Resolver is logging queries that originate in the specified VPC.
	//
	// *
	// DELETING: Resolver is deleting this query logging configuration.
	//
	// * FAILED:
	// Resolver can't deliver logs to the location that is specified in the query
	// logging configuration. Here are two common causes:
	//
	// * The specified destination
	// (for example, an Amazon S3 bucket) was deleted.
	//
	// * Permissions don't allow
	// sending logs to the destination.
	Status ResolverQueryLogConfigStatus
}

type ResolverQueryLogConfigAssociation struct {

	// The date and time that the VPC was associated with the query logging
	// configuration, in Unix time format and Coordinated Universal Time (UTC).
	CreationTime *string

	// If the value of Status is FAILED, the value of Error indicates the cause:
	//
	// *
	// DESTINATION_NOT_FOUND: The specified destination (for example, an Amazon S3
	// bucket) was deleted.
	//
	// * ACCESS_DENIED: Permissions don't allow sending logs to
	// the destination.
	//
	// If the value of Status is a value other than FAILED, Error is
	// null.
	Error ResolverQueryLogConfigAssociationError

	// Contains additional information about the error. If the value or Error is null,
	// the value of ErrorMessage also is null.
	ErrorMessage *string

	// The ID of the query logging association.
	Id *string

	// The ID of the query logging configuration that a VPC is associated with.
	ResolverQueryLogConfigId *string

	// The ID of the Amazon VPC that is associated with the query logging
	// configuration.
	ResourceId *string

	// The status of the specified query logging association. Valid values include the
	// following:
	//
	// * CREATING: Resolver is creating an association between an Amazon
	// VPC and a query logging configuration.
	//
	// * CREATED: The association between an
	// Amazon VPC and a query logging configuration was successfully created. Resolver
	// is logging queries that originate in the specified VPC.
	//
	// * DELETING: Resolver is
	// deleting this query logging association.
	//
	// * FAILED: Resolver either couldn't
	// create or couldn't delete the query logging association.
	Status ResolverQueryLogConfigAssociationStatus
}

type ResolverQueryLogConfigAssociationError string

const (
	ResolverQueryLogConfigAssociationErrorNone                 ResolverQueryLogConfigAssociationError = "NONE"
	ResolverQueryLogConfigAssociationErrorDestinationNotFound  ResolverQueryLogConfigAssociationError = "DESTINATION_NOT_FOUND"
	ResolverQueryLogConfigAssociationErrorAccessDenied         ResolverQueryLogConfigAssociationError = "ACCESS_DENIED"
	ResolverQueryLogConfigAssociationErrorInternalServiceError ResolverQueryLogConfigAssociationError = "INTERNAL_SERVICE_ERROR"
)

type ResolverQueryLogConfigAssociationStatus string

const (
	ResolverQueryLogConfigAssociationStatusCreating     ResolverQueryLogConfigAssociationStatus = "CREATING"
	ResolverQueryLogConfigAssociationStatusActive       ResolverQueryLogConfigAssociationStatus = "ACTIVE"
	ResolverQueryLogConfigAssociationStatusActionNeeded ResolverQueryLogConfigAssociationStatus = "ACTION_NEEDED"
	ResolverQueryLogConfigAssociationStatusDeleting     ResolverQueryLogConfigAssociationStatus = "DELETING"
	ResolverQueryLogConfigAssociationStatusFailed       ResolverQueryLogConfigAssociationStatus = "FAILED"
)

type ResolverQueryLogConfigStatus string

const (
	ResolverQueryLogConfigStatusCreating ResolverQueryLogConfigStatus = "CREATING"
	ResolverQueryLogConfigStatusCreated  ResolverQueryLogConfigStatus = "CREATED"
	ResolverQueryLogConfigStatusDeleting ResolverQueryLogConfigStatus = "DELETING"
	ResolverQueryLogConfigStatusFailed   ResolverQueryLogConfigStatus = "FAILED"
)

type ResolverRule struct {

	// The ARN (Amazon Resource Name) for the Resolver rule specified by Id.
	Arn *string

	// The date and time that the Resolver rule was created, in Unix time format and
	// Coordinated Universal Time (UTC).
	CreationTime *string

	// A unique string that you specified when you created the Resolver rule.
	// CreatorRequestId identifies the request and allows failed requests to be retried
	// without the risk of executing the operation twice.
	CreatorRequestId *string

	// DNS queries for this domain name are forwarded to the IP addresses that are
	// specified in TargetIps. If a query matches multiple Resolver rules (example.com
	// and www.example.com), the query is routed using the Resolver rule that contains
	// the most specific domain name (www.example.com).
	DomainName *string

	// The ID that Resolver assigned to the Resolver rule when you created it.
	Id *string

	// The date and time that the Resolver rule was last updated, in Unix time format
	// and Coordinated Universal Time (UTC).
	ModificationTime *string

	// The name for the Resolver rule, which you specified when you created the
	// Resolver rule.
	Name *string

	// When a rule is shared with another AWS account, the account ID of the account
	// that the rule is shared with.
	OwnerId *string

	// The ID of the endpoint that the rule is associated with.
	ResolverEndpointId *string

	// When you want to forward DNS queries for specified domain name to resolvers on
	// your network, specify FORWARD. When you have a forwarding rule to forward DNS
	// queries for a domain to your network and you want Resolver to process queries
	// for a subdomain of that domain, specify SYSTEM. For example, to forward DNS
	// queries for example.com to resolvers on your network, you create a rule and
	// specify FORWARD for RuleType. To then have Resolver process queries for
	// apex.example.com, you create a rule and specify SYSTEM for RuleType. Currently,
	// only Resolver can create rules that have a value of RECURSIVE for RuleType.
	RuleType RuleTypeOption

	// Whether the rules is shared and, if so, whether the current account is sharing
	// the rule with another account, or another account is sharing the rule with the
	// current account.
	ShareStatus ShareStatus

	// A code that specifies the current status of the Resolver rule.
	Status ResolverRuleStatus

	// A detailed description of the status of a Resolver rule.
	StatusMessage *string

	// An array that contains the IP addresses and ports that an outbound endpoint
	// forwards DNS queries to. Typically, these are the IP addresses of DNS resolvers
	// on your network. Specify IPv4 addresses. IPv6 is not supported.
	TargetIps []TargetAddress
}

type ResolverRuleAssociation struct {

	// The ID of the association between a Resolver rule and a VPC. Resolver assigns
	// this value when you submit an AssociateResolverRule
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_AssociateResolverRule.html)
	// request.
	Id *string

	// The name of an association between a Resolver rule and a VPC.
	Name *string

	// The ID of the Resolver rule that you associated with the VPC that is specified
	// by VPCId.
	ResolverRuleId *string

	// A code that specifies the current status of the association between a Resolver
	// rule and a VPC.
	Status ResolverRuleAssociationStatus

	// A detailed description of the status of the association between a Resolver rule
	// and a VPC.
	StatusMessage *string

	// The ID of the VPC that you associated the Resolver rule with.
	VPCId *string
}

type ResolverRuleAssociationStatus string

const (
	ResolverRuleAssociationStatusCreating   ResolverRuleAssociationStatus = "CREATING"
	ResolverRuleAssociationStatusComplete   ResolverRuleAssociationStatus = "COMPLETE"
	ResolverRuleAssociationStatusDeleting   ResolverRuleAssociationStatus = "DELETING"
	ResolverRuleAssociationStatusFailed     ResolverRuleAssociationStatus = "FAILED"
	ResolverRuleAssociationStatusOverridden ResolverRuleAssociationStatus = "OVERRIDDEN"
)

type ResolverRuleConfig struct {

	// The new name for the Resolver rule. The name that you specify appears in the
	// Resolver dashboard in the Route 53 console.
	Name *string

	// The ID of the new outbound Resolver endpoint that you want to use to route DNS
	// queries to the IP addresses that you specify in TargetIps.
	ResolverEndpointId *string

	// For DNS queries that originate in your VPC, the new IP addresses that you want
	// to route outbound DNS queries to.
	TargetIps []TargetAddress
}

type ResolverRuleStatus string

const (
	ResolverRuleStatusComplete ResolverRuleStatus = "COMPLETE"
	ResolverRuleStatusDeleting ResolverRuleStatus = "DELETING"
	ResolverRuleStatusUpdating ResolverRuleStatus = "UPDATING"
	ResolverRuleStatusFailed   ResolverRuleStatus = "FAILED"
)

type ResourceExistsException struct {
	Message *string

	ResourceType *string
}

type ResourceInUseException struct {
	Message *string

	ResourceType *string
}

type ResourceNotFoundException struct {
	Message *string

	ResourceType *string
}

type ResourceUnavailableException struct {
	Message *string

	ResourceType *string
}

type RuleTypeOption string

const (
	RuleTypeOptionForward   RuleTypeOption = "FORWARD"
	RuleTypeOptionSystem    RuleTypeOption = "SYSTEM"
	RuleTypeOptionRecursive RuleTypeOption = "RECURSIVE"
)

type ShareStatus string

const (
	ShareStatusNotShared    ShareStatus = "NOT_SHARED"
	ShareStatusSharedWithMe ShareStatus = "SHARED_WITH_ME"
	ShareStatusSharedByMe   ShareStatus = "SHARED_BY_ME"
)

type SortOrder string

const (
	SortOrderAscending  SortOrder = "ASCENDING"
	SortOrderDescending SortOrder = "DESCENDING"
)

type Tag struct {

	// The name for the tag. For example, if you want to associate Resolver resources
	// with the account IDs of your customers for billing purposes, the value of Key
	// might be account-id.
	//
	// This member is required.
	Key *string

	// The value for the tag. For example, if Key is account-id, then Value might be
	// the ID of the customer account that you're creating the resource for.
	//
	// This member is required.
	Value *string
}

type TargetAddress struct {

	// One IP address that you want to forward DNS queries to. You can specify only
	// IPv4 addresses.
	//
	// This member is required.
	Ip *string

	// The port at Ip that you want to forward DNS queries to.
	Port *int32
}

type ThrottlingException struct {
	Message *string
}

type UnknownResourceException struct {
	Message *string
}