const (
	ServiceName = "AWS Resource Groups Tagging API" // Service's name
	ServiceID   = "ResourceGroupsTaggingAPI"        // Service's identifier
	EndpointsID = "tagging"                         // Service's Endpoint identifier
)

const (

	// ErrCodeConcurrentModificationException for service response error code
	// "ConcurrentModificationException".
	//
	// The target of the operation is currently being modified by a different request.
	// Try again later.
	ErrCodeConcurrentModificationException = "ConcurrentModificationException"

	// ErrCodeConstraintViolationException for service response error code
	// "ConstraintViolationException".
	//
	// The request was denied because performing this operation violates a constraint.
	//
	// Some of the reasons in the following list might not apply to this specific
	// operation.
	//
	//    * You must meet the prerequisites for using tag policies. For information,
	//    see Prerequisites and Permissions for Using Tag Policies (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies_tag-policies-prereqs.html)
	//    in the AWS Organizations User Guide.
	//
	//    * You must enable the tag policies service principal (tagpolicies.tag.amazonaws.com)
	//    to integrate with AWS Organizations For information, see EnableAWSServiceAccess
	//    (http://docs.aws.amazon.com/organizations/latest/APIReference/API_EnableAWSServiceAccess.html).
	//
	//    * You must have a tag policy attached to the organization root, an OU,
	//    or an account.
	ErrCodeConstraintViolationException = "ConstraintViolationException"

	// ErrCodeInternalServiceException for service response error code
	// "InternalServiceException".
	//
	// The request processing failed because of an unknown error, exception, or
	// failure. You can retry the request.
	ErrCodeInternalServiceException = "InternalServiceException"

	// ErrCodeInvalidParameterException for service response error code
	// "InvalidParameterException".
	//
	// This error indicates one of the following:
	//
	//    * A parameter is missing.
	//
	//    * A malformed string was supplied for the request parameter.
	//
	//    * An out-of-range value was supplied for the request parameter.
	//
	//    * The target ID is invalid, unsupported, or doesn't exist.
	//
	//    * You can't access the Amazon S3 bucket for report storage. For more information,
	//    see Additional Requirements for Organization-wide Tag Compliance Reports
	//    (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies_tag-policies-prereqs.html#bucket-policies-org-report)
	//    in the AWS Organizations User Guide.
	ErrCodeInvalidParameterException = "InvalidParameterException"

	// ErrCodePaginationTokenExpiredException for service response error code
	// "PaginationTokenExpiredException".
	//
	// A PaginationToken is valid for a maximum of 15 minutes. Your request was
	// denied because the specified PaginationToken has expired.
	ErrCodePaginationTokenExpiredException = "PaginationTokenExpiredException"

	// ErrCodeThrottledException for service response error code
	// "ThrottledException".
	//
	// The request was denied to limit the frequency of submitted requests.
	ErrCodeThrottledException = "ThrottledException"
)

type Client struct {
	*aws.Client
}

type ComplianceDetails struct {

	// Whether a resource is compliant with the effective tag policy.
	ComplianceStatus *bool `type:"boolean"`

	// The tag value is noncompliant with the effective tag policy.
	KeysWithNoncompliantValues []string `type:"list"`

	// The tag key is noncompliant with the effective tag policy.
	NoncompliantKeys []string `type:"list"`
	// contains filtered or unexported fields
}

type DescribeReportCreationInput struct {
	// contains filtered or unexported fields
}

type DescribeReportCreationOutput struct {

	// Details of the common errors that all operations return.
	ErrorMessage *string `type:"string"`

	// The path to the Amazon S3 bucket where the report was stored on creation.
	S3Location *string `type:"string"`

	// Reports the status of the operation.
	//
	// The operation status can be one of the following:
	//
	//    * RUNNING - Report creation is in progress.
	//
	//    * SUCCEEDED - Report creation is complete. You can open the report from
	//    the Amazon S3 bucket that you specified when you ran StartReportCreation.
	//
	//    * FAILED - Report creation timed out or the Amazon S3 bucket is not accessible.
	//
	//    * NO REPORT - No report was generated in the last 90 days.
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeReportCreationRequest struct {
	*aws.Request
	Input *DescribeReportCreationInput
	Copy  func(*DescribeReportCreationInput) DescribeReportCreationRequest
}

type DescribeReportCreationResponse struct {
	*DescribeReportCreationOutput
	// contains filtered or unexported fields
}

type ErrorCode string

const (
	ErrorCodeInternalServiceException  ErrorCode = "InternalServiceException"
	ErrorCodeInvalidParameterException ErrorCode = "InvalidParameterException"
)

type FailureInfo struct {

	// The code of the common error. Valid values include InternalServiceException,
	// InvalidParameterException, and any valid error code returned by the AWS service
	// that hosts the resource that you want to tag.
	ErrorCode ErrorCode `type:"string" enum:"true"`

	// The message of the common error.
	ErrorMessage *string `type:"string"`

	// The HTTP status code of the common error.
	StatusCode *int64 `type:"integer"`
	// contains filtered or unexported fields
}

type GetComplianceSummaryInput struct {

	// A list of attributes to group the counts of noncompliant resources by. If
	// supplied, the counts are sorted by those attributes.
	GroupBy []GroupByAttribute `type:"list"`

	// A limit that restricts the number of results that are returned per page.
	MaxResults *int64 `min:"1" type:"integer"`

	// A string that indicates that additional data is available. Leave this value
	// empty for your initial request. If the response includes a PaginationToken,
	// use that string for this value to request an additional page of data.
	PaginationToken *string `type:"string"`

	// A list of Regions to limit the output by. If you use this parameter, the
	// count of returned noncompliant resources includes only resources in the specified
	// Regions.
	RegionFilters []string `min:"1" type:"list"`

	// The constraints on the resources that you want returned. The format of each
	// resource type is service[:resourceType]. For example, specifying a resource
	// type of ec2 returns all Amazon EC2 resources (which includes EC2 instances).
	// Specifying a resource type of ec2:instance returns only EC2 instances.
	//
	// The string for each service name and resource type is the same as that embedded
	// in a resource's Amazon Resource Name (ARN). Consult the AWS General Reference
	// for the following:
	//
	//    * For a list of service name strings, see AWS Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#genref-aws-service-namespaces).
	//
	//    * For resource type strings, see Example ARNs (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arns-syntax).
	//
	//    * For more information about ARNs, see Amazon Resource Names (ARNs) and
	//    AWS Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
	//
	// You can specify multiple resource types by using an array. The array can
	// include up to 100 items. Note that the length constraint requirement applies
	// to each resource type filter.
	ResourceTypeFilters []string `type:"list"`

	// A list of tag keys to limit the output by. If you use this parameter, the
	// count of returned noncompliant resources includes only resources that have
	// the specified tag keys.
	TagKeyFilters []string `min:"1" type:"list"`

	// The target identifiers (usually, specific account IDs) to limit the output
	// by. If you use this parameter, the count of returned noncompliant resources
	// includes only resources with the specified target IDs.
	TargetIdFilters []string `min:"1" type:"list"`
	// contains filtered or unexported fields
}

type GetComplianceSummaryOutput struct {

	// A string that indicates that the response contains more data than can be
	// returned in a single response. To receive additional data, specify this string
	// for the PaginationToken value in a subsequent request.
	PaginationToken *string `type:"string"`

	// A table that shows counts of noncompliant resources.
	SummaryList []Summary `type:"list"`
	// contains filtered or unexported fields
}

type GetComplianceSummaryPaginator struct {
	aws.Pager
}

type GetComplianceSummaryRequest struct {
	*aws.Request
	Input *GetComplianceSummaryInput
	Copy  func(*GetComplianceSummaryInput) GetComplianceSummaryRequest
}

type GetComplianceSummaryResponse struct {
	*GetComplianceSummaryOutput
	// contains filtered or unexported fields
}

type GetResourcesInput struct {

	// Specifies whether to exclude resources that are compliant with the tag policy.
	// Set this to true if you are interested in retrieving information on noncompliant
	// resources only.
	//
	// You can use this parameter only if the IncludeComplianceDetails parameter
	// is also set to true.
	ExcludeCompliantResources *bool `type:"boolean"`

	// Specifies whether to include details regarding the compliance with the effective
	// tag policy. Set this to true to determine whether resources are compliant
	// with the tag policy and to get details.
	IncludeComplianceDetails *bool `type:"boolean"`

	// A string that indicates that additional data is available. Leave this value
	// empty for your initial request. If the response includes a PaginationToken,
	// use that string for this value to request an additional page of data.
	PaginationToken *string `type:"string"`

	// The constraints on the resources that you want returned. The format of each
	// resource type is service[:resourceType]. For example, specifying a resource
	// type of ec2 returns all Amazon EC2 resources (which includes EC2 instances).
	// Specifying a resource type of ec2:instance returns only EC2 instances.
	//
	// The string for each service name and resource type is the same as that embedded
	// in a resource's Amazon Resource Name (ARN). Consult the AWS General Reference
	// for the following:
	//
	//    * For a list of service name strings, see AWS Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#genref-aws-service-namespaces).
	//
	//    * For resource type strings, see Example ARNs (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arns-syntax).
	//
	//    * For more information about ARNs, see Amazon Resource Names (ARNs) and
	//    AWS Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
	//
	// You can specify multiple resource types by using an array. The array can
	// include up to 100 items. Note that the length constraint requirement applies
	// to each resource type filter.
	ResourceTypeFilters []string `type:"list"`

	// A limit that restricts the number of resources returned by GetResources in
	// paginated output. You can set ResourcesPerPage to a minimum of 1 item and
	// the maximum of 100 items.
	ResourcesPerPage *int64 `type:"integer"`

	// A list of TagFilters (keys and values). Each TagFilter specified must contain
	// a key with values as optional. A request can include up to 50 keys, and each
	// key can include up to 20 values.
	//
	// Note the following when deciding how to use TagFilters:
	//
	//    * If you do specify a TagFilter, the response returns only those resources
	//    that are currently associated with the specified tag.
	//
	//    * If you don't specify a TagFilter, the response includes all resources
	//    that were ever associated with tags. Resources that currently don't have
	//    associated tags are shown with an empty tag set, like this: "Tags": [].
	//
	//    * If you specify more than one filter in a single request, the response
	//    returns only those resources that satisfy all specified filters.
	//
	//    * If you specify a filter that contains more than one value for a key,
	//    the response returns resources that match any of the specified values
	//    for that key.
	//
	//    * If you don't specify any values for a key, the response returns resources
	//    that are tagged with that key irrespective of the value. For example,
	//    for filters: filter1 = {key1, {value1}}, filter2 = {key2, {value2,value3,value4}}
	//    , filter3 = {key3}: GetResources( {filter1} ) returns resources tagged
	//    with key1=value1 GetResources( {filter2} ) returns resources tagged with
	//    key2=value2 or key2=value3 or key2=value4 GetResources( {filter3} ) returns
	//    resources tagged with any tag containing key3 as its tag key, irrespective
	//    of its value GetResources( {filter1,filter2,filter3} ) returns resources
	//    tagged with ( key1=value1) and ( key2=value2 or key2=value3 or key2=value4)
	//    and (key3, irrespective of the value)
	TagFilters []TagFilter `type:"list"`

	// AWS recommends using ResourcesPerPage instead of this parameter.
	//
	// A limit that restricts the number of tags (key and value pairs) returned
	// by GetResources in paginated output. A resource with no tags is counted as
	// having one tag (one key and value pair).
	//
	// GetResources does not split a resource and its associated tags across pages.
	// If the specified TagsPerPage would cause such a break, a PaginationToken
	// is returned in place of the affected resource and its tags. Use that token
	// in another request to get the remaining data. For example, if you specify
	// a TagsPerPage of 100 and the account has 22 resources with 10 tags each (meaning
	// that each resource has 10 key and value pairs), the output will consist of
	// three pages. The first page displays the first 10 resources, each with its
	// 10 tags. The second page displays the next 10 resources, each with its 10
	// tags. The third page displays the remaining 2 resources, each with its 10
	// tags.
	//
	// You can set TagsPerPage to a minimum of 100 items and the maximum of 500
	// items.
	TagsPerPage *int64 `type:"integer"`
	// contains filtered or unexported fields
}

type GetResourcesOutput struct {

	// A string that indicates that the response contains more data than can be
	// returned in a single response. To receive additional data, specify this string
	// for the PaginationToken value in a subsequent request.
	PaginationToken *string `type:"string"`

	// A list of resource ARNs and the tags (keys and values) associated with each.
	ResourceTagMappingList []ResourceTagMapping `type:"list"`
	// contains filtered or unexported fields
}

type GetResourcesPaginator struct {
	aws.Pager
}

type GetResourcesRequest struct {
	*aws.Request
	Input *GetResourcesInput
	Copy  func(*GetResourcesInput) GetResourcesRequest
}

type GetResourcesResponse struct {
	*GetResourcesOutput
	// contains filtered or unexported fields
}

type GetTagKeysInput struct {

	// A string that indicates that additional data is available. Leave this value
	// empty for your initial request. If the response includes a PaginationToken,
	// use that string for this value to request an additional page of data.
	PaginationToken *string `type:"string"`
	// contains filtered or unexported fields
}

type GetTagKeysOutput struct {

	// A string that indicates that the response contains more data than can be
	// returned in a single response. To receive additional data, specify this string
	// for the PaginationToken value in a subsequent request.
	PaginationToken *string `type:"string"`

	// A list of all tag keys in the AWS account.
	TagKeys []string `type:"list"`
	// contains filtered or unexported fields
}

type GetTagKeysPaginator struct {
	aws.Pager
}

type GetTagKeysRequest struct {
	*aws.Request
	Input *GetTagKeysInput
	Copy  func(*GetTagKeysInput) GetTagKeysRequest
}

type GetTagKeysResponse struct {
	*GetTagKeysOutput
	// contains filtered or unexported fields
}

type GetTagValuesInput struct {

	// The key for which you want to list all existing values in the specified Region
	// for the AWS account.
	//
	// Key is a required field
	Key *string `min:"1" type:"string" required:"true"`

	// A string that indicates that additional data is available. Leave this value
	// empty for your initial request. If the response includes a PaginationToken,
	// use that string for this value to request an additional page of data.
	PaginationToken *string `type:"string"`
	// contains filtered or unexported fields
}

type GetTagValuesOutput struct {

	// A string that indicates that the response contains more data than can be
	// returned in a single response. To receive additional data, specify this string
	// for the PaginationToken value in a subsequent request.
	PaginationToken *string `type:"string"`

	// A list of all tag values for the specified key in the AWS account.
	TagValues []string `type:"list"`
	// contains filtered or unexported fields
}

type GetTagValuesPaginator struct {
	aws.Pager
}

type GetTagValuesRequest struct {
	*aws.Request
	Input *GetTagValuesInput
	Copy  func(*GetTagValuesInput) GetTagValuesRequest
}

type GetTagValuesResponse struct {
	*GetTagValuesOutput
	// contains filtered or unexported fields
}

type GroupByAttribute string

const (
	GroupByAttributeTargetId     GroupByAttribute = "TARGET_ID"
	GroupByAttributeRegion       GroupByAttribute = "REGION"
	GroupByAttributeResourceType GroupByAttribute = "RESOURCE_TYPE"
)

type ResourceTagMapping struct {

	// Information that shows whether a resource is compliant with the effective
	// tag policy, including details on any noncompliant tag keys.
	ComplianceDetails *ComplianceDetails `type:"structure"`

	// The ARN of the resource.
	ResourceARN *string `min:"1" type:"string"`

	// The tags that have been applied to one or more AWS resources.
	Tags []Tag `type:"list"`
	// contains filtered or unexported fields
}

type StartReportCreationInput struct {

	// The name of the Amazon S3 bucket where the report will be stored; for example:
	//
	// awsexamplebucket
	//
	// For more information on S3 bucket requirements, including an example bucket
	// policy, see the example S3 bucket policy on this page.
	//
	// S3Bucket is a required field
	S3Bucket *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type StartReportCreationOutput struct {
	// contains filtered or unexported fields
}

type StartReportCreationRequest struct {
	*aws.Request
	Input *StartReportCreationInput
	Copy  func(*StartReportCreationInput) StartReportCreationRequest
}

type StartReportCreationResponse struct {
	*StartReportCreationOutput
	// contains filtered or unexported fields
}

type Summary struct {

	// The timestamp that shows when this summary was generated in this Region.
	LastUpdated *string `type:"string"`

	// The count of noncompliant resources.
	NonCompliantResources *int64 `type:"long"`

	// The AWS Region that the summary applies to.
	Region *string `min:"1" type:"string"`

	// The AWS resource type.
	ResourceType *string `type:"string"`

	// The account identifier or the root identifier of the organization. If you
	// don't know the root ID, you can call the AWS Organizations ListRoots (http://docs.aws.amazon.com/organizations/latest/APIReference/API_ListRoots.html)
	// API.
	TargetId *string `min:"6" type:"string"`

	// Whether the target is an account, an OU, or the organization root.
	TargetIdType TargetIdType `type:"string" enum:"true"`
	// contains filtered or unexported fields
}

type Tag struct {

	// One part of a key-value pair that makes up a tag. A key is a general label
	// that acts like a category for more specific tag values.
	//
	// Key is a required field
	Key *string `min:"1" type:"string" required:"true"`

	// The optional part of a key-value pair that make up a tag. A value acts as
	// a descriptor within a tag category (key).
	//
	// Value is a required field
	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type TagFilter struct {

	// One part of a key-value pair that makes up a tag. A key is a general label
	// that acts like a category for more specific tag values.
	Key *string `min:"1" type:"string"`

	// The optional part of a key-value pair that make up a tag. A value acts as
	// a descriptor within a tag category (key).
	Values []string `type:"list"`
	// contains filtered or unexported fields
}

type TagResourcesInput struct {

	// A list of ARNs. An ARN (Amazon Resource Name) uniquely identifies a resource.
	// You can specify a minimum of 1 and a maximum of 20 ARNs (resources) to tag.
	// An ARN can be set to a maximum of 1600 characters. For more information,
	// see Amazon Resource Names (ARNs) and AWS Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html)
	// in the AWS General Reference.
	//
	// ResourceARNList is a required field
	ResourceARNList []string `min:"1" type:"list" required:"true"`

	// The tags that you want to add to the specified resources. A tag consists
	// of a key and a value that you define.
	//
	// Tags is a required field
	Tags map[string]string `min:"1" type:"map" required:"true"`
	// contains filtered or unexported fields
}

type TagResourcesOutput struct {

	// Details of resources that could not be tagged. An error code, status code,
	// and error message are returned for each failed item.
	FailedResourcesMap map[string]FailureInfo `type:"map"`
	// contains filtered or unexported fields
}

type TagResourcesRequest struct {
	*aws.Request
	Input *TagResourcesInput
	Copy  func(*TagResourcesInput) TagResourcesRequest
}

type TagResourcesResponse struct {
	*TagResourcesOutput
	// contains filtered or unexported fields
}

type TargetIdType string

const (
	TargetIdTypeAccount TargetIdType = "ACCOUNT"
	TargetIdTypeOu      TargetIdType = "OU"
	TargetIdTypeRoot    TargetIdType = "ROOT"
)

type UntagResourcesInput struct {

	// A list of ARNs. An ARN (Amazon Resource Name) uniquely identifies a resource.
	// You can specify a minimum of 1 and a maximum of 20 ARNs (resources) to untag.
	// An ARN can be set to a maximum of 1600 characters. For more information,
	// see Amazon Resource Names (ARNs) and AWS Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html)
	// in the AWS General Reference.
	//
	// ResourceARNList is a required field
	ResourceARNList []string `min:"1" type:"list" required:"true"`

	// A list of the tag keys that you want to remove from the specified resources.
	//
	// TagKeys is a required field
	TagKeys []string `min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

type UntagResourcesOutput struct {

	// Details of resources that could not be untagged. An error code, status code,
	// and error message are returned for each failed item.
	FailedResourcesMap map[string]FailureInfo `type:"map"`
	// contains filtered or unexported fields
}

type UntagResourcesRequest struct {
	*aws.Request
	Input *UntagResourcesInput
	Copy  func(*UntagResourcesInput) UntagResourcesRequest
}

type UntagResourcesResponse struct {
	*UntagResourcesOutput
	// contains filtered or unexported fields
}