type AddFlowOutputs420Exception struct {
	Message *string
}

type AddOutputRequest struct {
	// A description of the output. This description appears only on the AWS Elemental
	// MediaConnect console and will not be seen by the end user.
	Description *string
	// The type of key used for the encryption. If no keyType is provided, the service
	// will use the default setting (static-key).
	Encryption *Encryption
	// The name of the VPC interface attachment to use for this output.
	VpcInterfaceAttachment *VpcInterfaceAttachment
	// The remote ID for the Zixi-pull output stream.
	RemoteId *string
	// The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
	SmoothingLatency *int32
	// The stream ID that you want to use for this transport. This parameter applies
	// only to Zixi-based streams.
	StreamId *string
	// The port to use when content is distributed to this output.
	Port *int32
	// The protocol to use for the output.
	Protocol Protocol
	// The IP address from which video will be sent to output destinations.
	Destination *string
	// The name of the output. This value must be unique within the current flow.
	Name *string
	// The maximum latency in milliseconds for Zixi-based streams.
	MaxLatency *int32
	// The range of IP addresses that should be allowed to initiate output requests to
	// this flow. These IP addresses should be in the form of a Classless Inter-Domain
	// Routing (CIDR) block; for example, 10.0.0.0/16.
	CidrAllowList []*string
}

type Algorithm string

const (
	AlgorithmAes128 Algorithm = "aes128"
	AlgorithmAes192 Algorithm = "aes192"
	AlgorithmAes256 Algorithm = "aes256"
)

type BadRequestException struct {
	Message *string
}

type CreateFlow420Exception struct {
	Message *string
}

type Encryption struct {
	// The ARN of the secret that you created in AWS Secrets Manager to store the
	// encryption key. This parameter is required for static key encryption and is not
	// valid for SPEKE encryption.
	SecretArn *string
	// The type of key that is used for the encryption. If no keyType is provided, the
	// service will use the default setting (static-key).
	KeyType KeyType
	// An identifier for the content. The service sends this value to the key server to
	// identify the current endpoint. The resource ID is also known as the content ID.
	// This parameter is required for SPEKE encryption and is not valid for static key
	// encryption.
	ResourceId *string
	// The value of one of the devices that you configured with your digital rights
	// management (DRM) platform key provider. This parameter is required for SPEKE
	// encryption and is not valid for static key encryption.
	DeviceId *string
	// The AWS Region that the API Gateway proxy endpoint was created in. This
	// parameter is required for SPEKE encryption and is not valid for static key
	// encryption.
	Region *string
	// A 128-bit, 16-byte hex value represented by a 32-character string, to be used
	// with the key for encrypting content. This parameter is not valid for static key
	// encryption.
	ConstantInitializationVector *string
	// The type of algorithm that is used for the encryption (such as aes128, aes192,
	// or aes256).
	Algorithm Algorithm
	// The ARN of the role that you created during setup (when you set up AWS Elemental
	// MediaConnect as a trusted entity).
	RoleArn *string
	// The URL from the API Gateway proxy that you set up to talk to your key server.
	// This parameter is required for SPEKE encryption and is not valid for static key
	// encryption.
	Url *string
}

type Entitlement struct {
	// An indication of whether the entitlement is enabled.
	EntitlementStatus EntitlementStatus
	// The ARN of the entitlement.
	EntitlementArn *string
	// The AWS account IDs that you want to share your content with. The receiving
	// accounts (subscribers) will be allowed to create their own flow using your
	// content as the source.
	Subscribers []*string
	// The name of the entitlement.
	Name *string
	// The type of encryption that will be used on the output that is associated with
	// this entitlement.
	Encryption *Encryption
	// A description of the entitlement.
	Description *string
	// Percentage from 0-100 of the data transfer cost to be billed to the subscriber.
	DataTransferSubscriberFeePercent *int32
}

type EntitlementStatus string

const (
	EntitlementStatusEnabled  EntitlementStatus = "ENABLED"
	EntitlementStatusDisabled EntitlementStatus = "DISABLED"
)

type FailoverConfig struct {
	State State
	// Search window time to look for dash-7 packets
	RecoveryWindow *int32
}

type Flow struct {
	// The settings for the source of the flow.
	Source *Source
	// The name of the flow.
	Name *string
	// The entitlements in this flow.
	Entitlements []*Entitlement
	Sources      []*Source
	// The VPC Interfaces for this flow.
	VpcInterfaces []*VpcInterface
	// The IP address from which video will be sent to output destinations.
	EgressIp *string
	// The settings for source failover
	SourceFailoverConfig *FailoverConfig
	// The outputs in this flow.
	Outputs []*Output
	// A description of the flow. This value is not used or seen outside of the current
	// AWS Elemental MediaConnect account.
	Description *string
	// The Amazon Resource Name (ARN), a unique identifier for any AWS resource, of the
	// flow.
	FlowArn *string
	// The Availability Zone that you want to create the flow in. These options are
	// limited to the Availability Zones within the current AWS.
	AvailabilityZone *string
	// The current status of the flow.
	Status Status
}

type ForbiddenException struct {
	Message *string
}

type GrantEntitlementRequest struct {
	// The name of the entitlement. This value must be unique within the current flow.
	Name *string
	// The type of encryption that will be used on the output that is associated with
	// this entitlement.
	Encryption *Encryption
	// Percentage from 0-100 of the data transfer cost to be billed to the subscriber.
	DataTransferSubscriberFeePercent *int32
	// A description of the entitlement. This description appears only on the AWS
	// Elemental MediaConnect console and will not be seen by the subscriber or end
	// user.
	Description *string
	// An indication of whether the new entitlement should be enabled or disabled as
	// soon as it is created. If you don’t specify the entitlementStatus field in your
	// request, MediaConnect sets it to ENABLED.
	EntitlementStatus EntitlementStatus
	// The AWS account IDs that you want to share your content with. The receiving
	// accounts (subscribers) will be allowed to create their own flows using your
	// content as the source.
	Subscribers []*string
}

type GrantFlowEntitlements420Exception struct {
	Message *string
}

type InternalServerErrorException struct {
	Message *string
}

type KeyType string

const (
	KeyTypeSpeke      KeyType = "speke"
	KeyTypeStatic_key KeyType = "static-key"
)

type ListedEntitlement struct {
	// The name of the entitlement.
	EntitlementName *string
	// The ARN of the entitlement.
	EntitlementArn *string
	// Percentage from 0-100 of the data transfer cost to be billed to the subscriber.
	DataTransferSubscriberFeePercent *int32
}

type ListedFlow struct {
	// The Availability Zone that the flow was created in.
	AvailabilityZone *string
	// A description of the flow.
	Description *string
	// The ARN of the flow.
	FlowArn *string
	// The name of the flow.
	Name *string
	// The current status of the flow.
	Status Status
	// The type of source. This value is either owned (originated somewhere other than
	// an AWS Elemental MediaConnect flow owned by another AWS account) or entitled
	// (originated at an AWS Elemental MediaConnect flow owned by another AWS account).
	SourceType SourceType
}

type Messages struct {
	// A list of errors that might have been generated from processes on this flow.
	Errors []*string
}

type NotFoundException struct {
	Message *string
}

type Output struct {
	// The address where you want to send the output.
	Destination *string
	// The input ARN of the AWS Elemental MediaLive channel. This parameter is relevant
	// only for outputs that were added by creating a MediaLive input.
	MediaLiveInputArn *string
	// Attributes related to the transport stream that are used in the output.
	Transport *Transport
	// The ARN of the output.
	OutputArn *string
	// The type of key used for the encryption. If no keyType is provided, the service
	// will use the default setting (static-key).
	Encryption *Encryption
	// The name of the VPC interface attachment to use for this output.
	VpcInterfaceAttachment *VpcInterfaceAttachment
	// A description of the output.
	Description *string
	// Percentage from 0-100 of the data transfer cost to be billed to the subscriber.
	DataTransferSubscriberFeePercent *int32
	// The name of the output. This value must be unique within the current flow.
	Name *string
	// The port to use when content is distributed to this output.
	Port *int32
	// The ARN of the entitlement on the originator''s flow. This value is relevant
	// only on entitled flows.
	EntitlementArn *string
}

type Protocol string

const (
	ProtocolZixi_push Protocol = "zixi-push"
	ProtocolRtp_fec   Protocol = "rtp-fec"
	ProtocolRtp       Protocol = "rtp"
	ProtocolZixi_pull Protocol = "zixi-pull"
	ProtocolRist      Protocol = "rist"
)

type ServiceUnavailableException struct {
	Message *string
}

type SetSourceRequest struct {
	// The name of the VPC interface to use for this source.
	VpcInterfaceName *string
	// The port that the flow will be listening on for incoming content.
	IngestPort *int32
	// The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.
	MaxBitrate *int32
	// The ARN of the entitlement that allows you to subscribe to this flow. The
	// entitlement is set by the flow originator, and the ARN is generated as part of
	// the originator's flow.
	EntitlementArn *string
	// The maximum latency in milliseconds. This parameter applies only to RIST-based
	// and Zixi-based streams.
	MaxLatency *int32
	// The range of IP addresses that should be allowed to contribute content to your
	// source. These IP addresses should be in the form of a Classless Inter-Domain
	// Routing (CIDR) block; for example, 10.0.0.0/16.
	WhitelistCidr *string
	// The name of the source.
	Name *string
	// The stream ID that you want to use for this transport. This parameter applies
	// only to Zixi-based streams.
	StreamId *string
	// The type of encryption that is used on the content ingested from this source.
	Decryption *Encryption
	// The protocol that is used by the source.
	Protocol Protocol
	// A description for the source. This value is not used or seen outside of the
	// current AWS Elemental MediaConnect account.
	Description *string
}

type Source struct {
	// The ARN of the source.
	SourceArn *string
	// The name of the source.
	Name *string
	// Percentage from 0-100 of the data transfer cost to be billed to the subscriber.
	DataTransferSubscriberFeePercent *int32
	// The range of IP addresses that should be allowed to contribute content to your
	// source. These IP addresses should be in the form of a Classless Inter-Domain
	// Routing (CIDR) block; for example, 10.0.0.0/16.
	WhitelistCidr *string
	// A description for the source. This value is not used or seen outside of the
	// current AWS Elemental MediaConnect account.
	Description *string
	// The name of the VPC Interface this Source is configured with.
	VpcInterfaceName *string
	// Attributes related to the transport stream that are used in the source.
	Transport *Transport
	// The type of encryption that is used on the content ingested from this source.
	Decryption *Encryption
	// The ARN of the entitlement that allows you to subscribe to content that comes
	// from another AWS account. The entitlement is set by the content originator and
	// the ARN is generated as part of the originator's flow.
	EntitlementArn *string
	// The port that the flow will be listening on for incoming content.
	IngestPort *int32
	// The IP address that the flow will be listening on for incoming content.
	IngestIp *string
}

type SourceType string

const (
	SourceTypeOwned    SourceType = "OWNED"
	SourceTypeEntitled SourceType = "ENTITLED"
)

type State string

const (
	StateEnabled  State = "ENABLED"
	StateDisabled State = "DISABLED"
)

type Status string

const (
	StatusStandby  Status = "STANDBY"
	StatusActive   Status = "ACTIVE"
	StatusUpdating Status = "UPDATING"
	StatusDeleting Status = "DELETING"
	StatusStarting Status = "STARTING"
	StatusStopping Status = "STOPPING"
	StatusError    Status = "ERROR"
)

type TooManyRequestsException struct {
	Message *string
}

type Transport struct {
	// The remote ID for the Zixi-pull stream.
	RemoteId *string
	// The range of IP addresses that should be allowed to initiate output requests to
	// this flow. These IP addresses should be in the form of a Classless Inter-Domain
	// Routing (CIDR) block; for example, 10.0.0.0/16.
	CidrAllowList []*string
	// The maximum latency in milliseconds. This parameter applies only to RIST-based
	// and Zixi-based streams.
	MaxLatency *int32
	// The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
	SmoothingLatency *int32
	// The stream ID that you want to use for this transport. This parameter applies
	// only to Zixi-based streams.
	StreamId *string
	// The protocol that is used by the source or output.
	Protocol Protocol
	// The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.
	MaxBitrate *int32
}

type UpdateEncryption struct {
	// The AWS Region that the API Gateway proxy endpoint was created in. This
	// parameter is required for SPEKE encryption and is not valid for static key
	// encryption.
	Region *string
	// The ARN of the role that you created during setup (when you set up AWS Elemental
	// MediaConnect as a trusted entity).
	RoleArn *string
	// The URL from the API Gateway proxy that you set up to talk to your key server.
	// This parameter is required for SPEKE encryption and is not valid for static key
	// encryption.
	Url *string
	// The type of algorithm that is used for the encryption (such as aes128, aes192,
	// or aes256).
	Algorithm Algorithm
	// The type of key that is used for the encryption. If no keyType is provided, the
	// service will use the default setting (static-key).
	KeyType KeyType
	// The value of one of the devices that you configured with your digital rights
	// management (DRM) platform key provider. This parameter is required for SPEKE
	// encryption and is not valid for static key encryption.
	DeviceId *string
	// A 128-bit, 16-byte hex value represented by a 32-character string, to be used
	// with the key for encrypting content. This parameter is not valid for static key
	// encryption.
	ConstantInitializationVector *string
	// An identifier for the content. The service sends this value to the key server to
	// identify the current endpoint. The resource ID is also known as the content ID.
	// This parameter is required for SPEKE encryption and is not valid for static key
	// encryption.
	ResourceId *string
	// The ARN of the secret that you created in AWS Secrets Manager to store the
	// encryption key. This parameter is required for static key encryption and is not
	// valid for SPEKE encryption.
	SecretArn *string
}

type UpdateFailoverConfig struct {
	State State
	// Recovery window time to look for dash-7 packets
	RecoveryWindow *int32
}

type VpcInterface struct {
	// Immutable and has to be a unique against other VpcInterfaces in this Flow
	Name *string
	// IDs of the network interfaces created in customer's account by MediaConnect.
	NetworkInterfaceIds []*string
	// Security Group IDs to be used on ENI.
	SecurityGroupIds []*string
	// Subnet must be in the AZ of the Flow
	SubnetId *string
	// Role Arn MediaConnect can assumes to create ENIs in customer's account
	RoleArn *string
}

type VpcInterfaceAttachment struct {
	// The name of the VPC interface to use for this output.
	VpcInterfaceName *string
}

type VpcInterfaceRequest struct {
	// Subnet must be in the AZ of the Flow
	SubnetId *string
	// Security Group IDs to be used on ENI.
	SecurityGroupIds []*string
	// Role Arn MediaConnect can assumes to create ENIs in customer's account
	RoleArn *string
	// The name of the VPC Interface. This value must be unique within the current
	// flow.
	Name *string
}