type Accelerator struct {

	// The Amazon Resource Name (ARN) of the accelerator.
	AcceleratorArn *string

	// The date and time that the accelerator was created.
	CreatedTime *time.Time

	// The Domain Name System (DNS) name that Global Accelerator creates that points to
	// your accelerator's static IP addresses. The naming convention for the DNS name
	// is the following: A lowercase letter a, followed by a 16-bit random hex string,
	// followed by .awsglobalaccelerator.com. For example:
	// a1234567890abcdef.awsglobalaccelerator.com. For more information about the
	// default DNS name, see  Support for DNS Addressing in Global Accelerator
	// (https://docs.aws.amazon.com/global-accelerator/latest/dg/about-accelerators.html#about-accelerators.dns-addressing)
	// in the AWS Global Accelerator Developer Guide.
	DnsName *string

	// Indicates whether the accelerator is enabled. The value is true or false. The
	// default value is true. If the value is set to true, the accelerator cannot be
	// deleted. If set to false, accelerator can be deleted.
	Enabled *bool

	// The value for the address type must be IPv4.
	IpAddressType IpAddressType

	// The static IP addresses that Global Accelerator associates with the accelerator.
	IpSets []*IpSet

	// The date and time that the accelerator was last modified.
	LastModifiedTime *time.Time

	// The name of the accelerator. The name must contain only alphanumeric characters
	// or hyphens (-), and must not begin or end with a hyphen.
	Name *string

	// Describes the deployment status of the accelerator.
	Status AcceleratorStatus
}

type AcceleratorAttributes struct {

	// Indicates whether flow logs are enabled. The default value is false. If the
	// value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified. For more
	// information, see Flow Logs
	// (https://docs.aws.amazon.com/global-accelerator/latest/dg/monitoring-global-accelerator.flow-logs.html)
	// in the AWS Global Accelerator Developer Guide.
	FlowLogsEnabled *bool

	// The name of the Amazon S3 bucket for the flow logs. Attribute is required if
	// FlowLogsEnabled is true. The bucket must exist and have a bucket policy that
	// grants AWS Global Accelerator permission to write to the bucket.
	FlowLogsS3Bucket *string

	// The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute
	// is required if FlowLogsEnabled is true. If you don’t specify a prefix, the flow
	// logs are stored in the root of the bucket. If you specify slash (/) for the S3
	// bucket prefix, the log file bucket folder structure will include a double slash
	// (//), like the following: s3-bucket_name//AWSLogs/aws_account_id
	FlowLogsS3Prefix *string
}

type AcceleratorNotDisabledException struct {
	Message *string
}

type AcceleratorNotFoundException struct {
	Message *string
}

type AcceleratorStatus string

const (
	AcceleratorStatusDeployed   AcceleratorStatus = "DEPLOYED"
	AcceleratorStatusInProgress AcceleratorStatus = "IN_PROGRESS"
)

type AccessDeniedException struct {
	Message *string
}

type AssociatedEndpointGroupFoundException struct {
	Message *string
}

type AssociatedListenerFoundException struct {
	Message *string
}

type ByoipCidr struct {

	// The address range, in CIDR notation.
	Cidr *string

	// A history of status changes for an IP address range that you bring to AWS Global
	// Accelerator through bring your own IP address (BYOIP).
	Events []*ByoipCidrEvent

	// The state of the address pool.
	State ByoipCidrState
}

type ByoipCidrEvent struct {

	// A string that contains an Event message describing changes that you make in the
	// status of an IP address range that you bring to AWS Global Accelerator through
	// bring your own IP address (BYOIP).
	Message *string

	// A timestamp when you make a status change for an IP address range that you bring
	// to AWS Global Accelerator through bring your own IP address (BYOIP).
	Timestamp *time.Time
}

type ByoipCidrNotFoundException struct {
	Message *string
}

type ByoipCidrState string

const (
	ByoipCidrStatePendingProvisioning   ByoipCidrState = "PENDING_PROVISIONING"
	ByoipCidrStateReady                 ByoipCidrState = "READY"
	ByoipCidrStatePendingAdvertising    ByoipCidrState = "PENDING_ADVERTISING"
	ByoipCidrStateAdvertising           ByoipCidrState = "ADVERTISING"
	ByoipCidrStatePendingWithdrawing    ByoipCidrState = "PENDING_WITHDRAWING"
	ByoipCidrStatePendingDeprovisioning ByoipCidrState = "PENDING_DEPROVISIONING"
	ByoipCidrStateDeprovisioned         ByoipCidrState = "DEPROVISIONED"
	ByoipCidrStateFailedProvision       ByoipCidrState = "FAILED_PROVISION"
	ByoipCidrStateFailedAdvertising     ByoipCidrState = "FAILED_ADVERTISING"
	ByoipCidrStateFailedWithdraw        ByoipCidrState = "FAILED_WITHDRAW"
	ByoipCidrStateFailedDeprovision     ByoipCidrState = "FAILED_DEPROVISION"
)

type CidrAuthorizationContext struct {

	// The plain-text authorization message for the prefix and account.
	//
	// This member is required.
	Message *string

	// The signed authorization message for the prefix and account.
	//
	// This member is required.
	Signature *string
}

type ClientAffinity string

const (
	ClientAffinityNone     ClientAffinity = "NONE"
	ClientAffinitySourceIp ClientAffinity = "SOURCE_IP"
)

type EndpointConfiguration struct {

	// Indicates whether client IP address preservation is enabled for an Application
	// Load Balancer endpoint. The value is true or false. The default value is true
	// for new accelerators. If the value is set to true, the client's IP address is
	// preserved in the X-Forwarded-For request header as traffic travels to
	// applications on the Application Load Balancer endpoint fronted by the
	// accelerator. For more information, see  Preserve Client IP Addresses in AWS
	// Global Accelerator
	// (https://docs.aws.amazon.com/global-accelerator/latest/dg/preserve-client-ip-address.html)
	// in the AWS Global Accelerator Developer Guide.
	ClientIPPreservationEnabled *bool

	// An ID for the endpoint. If the endpoint is a Network Load Balancer or
	// Application Load Balancer, this is the Amazon Resource Name (ARN) of the
	// resource. If the endpoint is an Elastic IP address, this is the Elastic IP
	// address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID. A
	// resource must be valid and active when you add it as an endpoint. An Application
	// Load Balancer can be either internal or internet-facing.
	EndpointId *string

	// The weight associated with the endpoint. When you add weights to endpoints, you
	// configure AWS Global Accelerator to route traffic based on proportions that you
	// specify. For example, you might specify endpoint weights of 4, 5, 5, and 6
	// (sum=20). The result is that 4/20 of your traffic, on average, is routed to the
	// first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20
	// is routed to the last endpoint. For more information, see Endpoint Weights
	// (https://docs.aws.amazon.com/global-accelerator/latest/dg/about-endpoints-endpoint-weights.html)
	// in the AWS Global Accelerator Developer Guide.
	Weight *int32
}

type EndpointDescription struct {

	// Indicates whether client IP address preservation is enabled for an Application
	// Load Balancer endpoint. The value is true or false. The default value is true
	// for new accelerators. If the value is set to true, the client's IP address is
	// preserved in the X-Forwarded-For request header as traffic travels to
	// applications on the Application Load Balancer endpoint fronted by the
	// accelerator. For more information, see  Viewing Client IP Addresses in AWS
	// Global Accelerator
	// (https://docs.aws.amazon.com/global-accelerator/latest/dg/introduction-how-it-works-client-ip.html)
	// in the AWS Global Accelerator Developer Guide.
	ClientIPPreservationEnabled *bool

	// An ID for the endpoint. If the endpoint is a Network Load Balancer or
	// Application Load Balancer, this is the Amazon Resource Name (ARN) of the
	// resource. If the endpoint is an Elastic IP address, this is the Elastic IP
	// address allocation ID. For EC2 instances, this is the EC2 instance ID. An
	// Application Load Balancer can be either internal or internet-facing.
	EndpointId *string

	// The reason code associated with why the endpoint is not healthy. If the endpoint
	// state is healthy, a reason code is not provided. If the endpoint state is
	// unhealthy, the reason code can be one of the following values:
	//
	// * Timeout: The
	// health check requests to the endpoint are timing out before returning a
	// status.
	//
	// * Failed: The health check failed, for example because the endpoint
	// response was invalid (malformed).
	//
	// If the endpoint state is initial, the reason
	// code can be one of the following values:
	//
	// * ProvisioningInProgress: The endpoint
	// is in the process of being provisioned.
	//
	// * InitialHealthChecking: Global
	// Accelerator is still setting up the minimum number of health checks for the
	// endpoint that are required to determine its health status.
	HealthReason *string

	// The health status of the endpoint.
	HealthState HealthState

	// The weight associated with the endpoint. When you add weights to endpoints, you
	// configure AWS Global Accelerator to route traffic based on proportions that you
	// specify. For example, you might specify endpoint weights of 4, 5, 5, and 6
	// (sum=20). The result is that 4/20 of your traffic, on average, is routed to the
	// first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20
	// is routed to the last endpoint. For more information, see Endpoint Weights
	// (https://docs.aws.amazon.com/global-accelerator/latest/dg/about-endpoints-endpoint-weights.html)
	// in the AWS Global Accelerator Developer Guide.
	Weight *int32
}

type EndpointGroup struct {

	// The list of endpoint objects.
	EndpointDescriptions []*EndpointDescription

	// The Amazon Resource Name (ARN) of the endpoint group.
	EndpointGroupArn *string

	// The AWS Region where the endpoint group is located.
	EndpointGroupRegion *string

	// The time—10 seconds or 30 seconds—between health checks for each endpoint. The
	// default value is 30.
	HealthCheckIntervalSeconds *int32

	// If the protocol is HTTP/S, then this value provides the ping path that Global
	// Accelerator uses for the destination on the endpoints for health checks. The
	// default is slash (/).
	HealthCheckPath *string

	// The port that Global Accelerator uses to perform health checks on endpoints that
	// are part of this endpoint group. The default port is the port for the listener
	// that this endpoint group is associated with. If the listener port is a list,
	// Global Accelerator uses the first specified port in the list of ports.
	HealthCheckPort *int32

	// The protocol that Global Accelerator uses to perform health checks on endpoints
	// that are part of this endpoint group. The default value is TCP.
	HealthCheckProtocol HealthCheckProtocol

	// Allows you to override the destination ports used to route traffic to an
	// endpoint. Using a port override lets you to map a list of external destination
	// ports (that your users send traffic to) to a list of internal destination ports
	// that you want an application endpoint to receive traffic on.
	PortOverrides []*PortOverride

	// The number of consecutive health checks required to set the state of a healthy
	// endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default
	// value is 3.
	ThresholdCount *int32

	// The percentage of traffic to send to an AWS Region. Additional traffic is
	// distributed to other endpoint groups for this listener. Use this action to
	// increase (dial up) or decrease (dial down) traffic to a specific Region. The
	// percentage is applied to the traffic that would otherwise have been routed to
	// the Region based on optimal routing. The default value is 100.
	TrafficDialPercentage *float32
}

type EndpointGroupAlreadyExistsException struct {
	Message *string
}

type EndpointGroupNotFoundException struct {
	Message *string
}

type HealthCheckProtocol string

const (
	HealthCheckProtocolTcp   HealthCheckProtocol = "TCP"
	HealthCheckProtocolHttp  HealthCheckProtocol = "HTTP"
	HealthCheckProtocolHttps HealthCheckProtocol = "HTTPS"
)

type HealthState string

const (
	HealthStateInitial   HealthState = "INITIAL"
	HealthStateHealthy   HealthState = "HEALTHY"
	HealthStateUnhealthy HealthState = "UNHEALTHY"
)

type IncorrectCidrStateException struct {
	Message *string
}

type InternalServiceErrorException struct {
	Message *string
}

type InvalidArgumentException struct {
	Message *string
}

type InvalidNextTokenException struct {
	Message *string
}

type InvalidPortRangeException struct {
	Message *string
}

type IpAddressType string

const (
	IpAddressTypeIpv4 IpAddressType = "IPV4"
)

type IpSet struct {

	// The array of IP addresses in the IP address set. An IP address set can have a
	// maximum of two IP addresses.
	IpAddresses []*string

	// The types of IP addresses included in this IP set.
	IpFamily *string
}

type LimitExceededException struct {
	Message *string
}

type Listener struct {

	// Client affinity lets you direct all requests from a user to the same endpoint,
	// if you have stateful applications, regardless of the port and protocol of the
	// client request. Client affinity gives you control over whether to always route
	// each client to the same specific endpoint. AWS Global Accelerator uses a
	// consistent-flow hashing algorithm to choose the optimal endpoint for a
	// connection. If client affinity is NONE, Global Accelerator uses the "five-tuple"
	// (5-tuple) properties—source IP address, source port, destination IP address,
	// destination port, and protocol—to select the hash value, and then chooses the
	// best endpoint. However, with this setting, if someone uses different ports to
	// connect to Global Accelerator, their connections might not be always routed to
	// the same endpoint because the hash value changes. If you want a given client to
	// always be routed to the same endpoint, set client affinity to SOURCE_IP instead.
	// When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple"
	// (2-tuple) properties— source (client) IP address and destination IP address—to
	// select the hash value. The default value is NONE.
	ClientAffinity ClientAffinity

	// The Amazon Resource Name (ARN) of the listener.
	ListenerArn *string

	// The list of port ranges for the connections from clients to the accelerator.
	PortRanges []*PortRange

	// The protocol for the connections from clients to the accelerator.
	Protocol Protocol
}

type ListenerNotFoundException struct {
	Message *string
}

type PortOverride struct {

	// The endpoint port that you want a listener port to be mapped to. This is the
	// port on the endpoint, such as the Application Load Balancer or Amazon EC2
	// instance.
	EndpointPort *int32

	// The listener port that you want to map to a specific endpoint port. This is the
	// port that user traffic arrives to the Global Accelerator on.
	ListenerPort *int32
}

type PortRange struct {

	// The first port in the range of ports, inclusive.
	FromPort *int32

	// The last port in the range of ports, inclusive.
	ToPort *int32
}

type Protocol string

const (
	ProtocolTcp Protocol = "TCP"
	ProtocolUdp Protocol = "UDP"
)

type Tag struct {

	// A string that contains a Tag key.
	//
	// This member is required.
	Key *string

	// A string that contains a Tag value.
	//
	// This member is required.
	Value *string
}