type AddressFamily string

const (
	AddressFamilyIpv4 AddressFamily = "ipv4"
	AddressFamilyIpv6 AddressFamily = "ipv6"
)

type AssociatedGateway struct {

	// The ID of the associated gateway.
	Id *string

	// The ID of the AWS account that owns the associated virtual private gateway or
	// transit gateway.
	OwnerAccount *string

	// The Region where the associated gateway is located.
	Region *string

	// The type of associated gateway.
	Type GatewayType
}

type BGPPeer struct {

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration.
	Asn *int32

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The Direct Connect endpoint on which the BGP peer terminates.
	AwsDeviceV2 *string

	// The ID of the BGP peer.
	BgpPeerId *string

	// The state of the BGP peer. The following are the possible values:
	//
	//     *
	// verifying: The BGP peering addresses or ASN require validation before the BGP
	// peer can be created. This state applies only to public virtual interfaces.
	//
	//
	// * pending: The BGP peer is created, and remains in this state until it is ready
	// to be established.
	//
	//     * available: The BGP peer is ready to be established.
	//
	//
	// * deleting: The BGP peer is being deleted.
	//
	//     * deleted: The BGP peer is
	// deleted and cannot be established.
	BgpPeerState BGPPeerState

	// The status of the BGP peer. The following are the possible values:
	//
	//     * up:
	// The BGP peer is established. This state does not indicate the state of the
	// routing function. Ensure that you are receiving routes over the BGP session.
	//
	//
	// * down: The BGP peer is down.
	//
	//     * unknown: The BGP peer status is not
	// available.
	BgpStatus BGPStatus

	// The IP address assigned to the customer interface.
	CustomerAddress *string
}

type BGPPeerState string

const (
	BGPPeerStateVerifying BGPPeerState = "verifying"
	BGPPeerStatePending   BGPPeerState = "pending"
	BGPPeerStateAvailable BGPPeerState = "available"
	BGPPeerStateDeleting  BGPPeerState = "deleting"
	BGPPeerStateDeleted   BGPPeerState = "deleted"
)

type BGPStatus string

const (
	BGPStatusUp      BGPStatus = "up"
	BGPStatusDown    BGPStatus = "down"
	BGPStatusUnknown BGPStatus = "unknown"
)

type Connection struct {

	// The Direct Connect endpoint on which the physical connection terminates.
	AwsDevice *string

	// The Direct Connect endpoint on which the physical connection terminates.
	AwsDeviceV2 *string

	// The bandwidth of the connection.
	Bandwidth *string

	// The ID of the connection.
	ConnectionId *string

	// The name of the connection.
	ConnectionName *string

	// The state of the connection. The following are the possible values:
	//
	//     *
	// ordering: The initial state of a hosted connection provisioned on an
	// interconnect. The connection stays in the ordering state until the owner of the
	// hosted connection confirms or declines the connection order.
	//
	//     * requested:
	// The initial state of a standard connection. The connection stays in the
	// requested state until the Letter of Authorization (LOA) is sent to the
	// customer.
	//
	//     * pending: The connection has been approved and is being
	// initialized.
	//
	//     * available: The network link is up and the connection is
	// ready for use.
	//
	//     * down: The network link is down.
	//
	//     * deleting: The
	// connection is being deleted.
	//
	//     * deleted: The connection has been deleted.
	//
	//
	// * rejected: A hosted connection in the ordering state enters the rejected state
	// if it is deleted by the customer.
	//
	//     * unknown: The state of the connection is
	// not available.
	ConnectionState ConnectionState

	// Indicates whether the connection supports a secondary BGP peer in the same
	// address family (IPv4/IPv6).
	HasLogicalRedundancy HasLogicalRedundancy

	// Indicates whether jumbo frames (9001 MTU) are supported.
	JumboFrameCapable *bool

	// The ID of the LAG.
	LagId *string

	// The time of the most recent call to DescribeLoa for this connection.
	LoaIssueTime *time.Time

	// The location of the connection.
	Location *string

	// The ID of the AWS account that owns the connection.
	OwnerAccount *string

	// The name of the AWS Direct Connect service provider associated with the
	// connection.
	PartnerName *string

	// The name of the service provider associated with the connection.
	ProviderName *string

	// The AWS Region where the connection is located.
	Region *string

	// The tags associated with the connection.
	Tags []*Tag

	// The ID of the VLAN.
	Vlan *int32
}

type ConnectionState string

const (
	ConnectionStateOrdering  ConnectionState = "ordering"
	ConnectionStateRequested ConnectionState = "requested"
	ConnectionStatePending   ConnectionState = "pending"
	ConnectionStateAvailable ConnectionState = "available"
	ConnectionStateDown      ConnectionState = "down"
	ConnectionStateDeleting  ConnectionState = "deleting"
	ConnectionStateDeleted   ConnectionState = "deleted"
	ConnectionStateRejected  ConnectionState = "rejected"
	ConnectionStateUnknown   ConnectionState = "unknown"
)

type DirectConnectClientException struct {
	Message *string
}

type DirectConnectGateway struct {

	// The autonomous system number (ASN) for the Amazon side of the connection.
	AmazonSideAsn *int64

	// The ID of the Direct Connect gateway.
	DirectConnectGatewayId *string

	// The name of the Direct Connect gateway.
	DirectConnectGatewayName *string

	// The state of the Direct Connect gateway. The following are the possible
	// values:
	//
	//     * pending: The initial state after calling
	// CreateDirectConnectGateway.
	//
	//     * available: The Direct Connect gateway is
	// ready for use.
	//
	//     * deleting: The initial state after calling
	// DeleteDirectConnectGateway.
	//
	//     * deleted: The Direct Connect gateway is
	// deleted and cannot pass traffic.
	DirectConnectGatewayState DirectConnectGatewayState

	// The ID of the AWS account that owns the Direct Connect gateway.
	OwnerAccount *string

	// The error message if the state of an object failed to advance.
	StateChangeError *string
}

type DirectConnectGatewayAssociation struct {

	// The Amazon VPC prefixes to advertise to the Direct Connect gateway.
	AllowedPrefixesToDirectConnectGateway []*RouteFilterPrefix

	// Information about the associated gateway.
	AssociatedGateway *AssociatedGateway

	// The ID of the Direct Connect gateway association.
	AssociationId *string

	// The state of the association. The following are the possible values:
	//
	//     *
	// associating: The initial state after calling
	// CreateDirectConnectGatewayAssociation.
	//
	//     * associated: The Direct Connect
	// gateway and virtual private gateway or transit gateway are successfully
	// associated and ready to pass traffic.
	//
	//     * disassociating: The initial state
	// after calling DeleteDirectConnectGatewayAssociation.
	//
	//     * disassociated: The
	// virtual private gateway or transit gateway is disassociated from the Direct
	// Connect gateway. Traffic flow between the Direct Connect gateway and virtual
	// private gateway or transit gateway is stopped.
	AssociationState DirectConnectGatewayAssociationState

	// The ID of the Direct Connect gateway.
	DirectConnectGatewayId *string

	// The ID of the AWS account that owns the associated gateway.
	DirectConnectGatewayOwnerAccount *string

	// The error message if the state of an object failed to advance.
	StateChangeError *string

	// The ID of the virtual private gateway. Applies only to private virtual
	// interfaces.
	VirtualGatewayId *string

	// The ID of the AWS account that owns the virtual private gateway.
	VirtualGatewayOwnerAccount *string

	// The AWS Region where the virtual private gateway is located.
	VirtualGatewayRegion *string
}

type DirectConnectGatewayAssociationProposal struct {

	// Information about the associated gateway.
	AssociatedGateway *AssociatedGateway

	// The ID of the Direct Connect gateway.
	DirectConnectGatewayId *string

	// The ID of the AWS account that owns the Direct Connect gateway.
	DirectConnectGatewayOwnerAccount *string

	// The existing Amazon VPC prefixes advertised to the Direct Connect gateway.
	ExistingAllowedPrefixesToDirectConnectGateway []*RouteFilterPrefix

	// The ID of the association proposal.
	ProposalId *string

	// The state of the proposal. The following are possible values:
	//
	//     * accepted:
	// The proposal has been accepted. The Direct Connect gateway association is
	// available to use in this state.
	//
	//     * deleted: The proposal has been deleted by
	// the owner that made the proposal. The Direct Connect gateway association cannot
	// be used in this state.
	//
	//     * requested: The proposal has been requested. The
	// Direct Connect gateway association cannot be used in this state.
	ProposalState DirectConnectGatewayAssociationProposalState

	// The Amazon VPC prefixes to advertise to the Direct Connect gateway.
	RequestedAllowedPrefixesToDirectConnectGateway []*RouteFilterPrefix
}

type DirectConnectGatewayAssociationProposalState string

const (
	DirectConnectGatewayAssociationProposalStateRequested DirectConnectGatewayAssociationProposalState = "requested"
	DirectConnectGatewayAssociationProposalStateAccepted  DirectConnectGatewayAssociationProposalState = "accepted"
	DirectConnectGatewayAssociationProposalStateDeleted   DirectConnectGatewayAssociationProposalState = "deleted"
)

type DirectConnectGatewayAssociationState string

const (
	DirectConnectGatewayAssociationStateAssociating    DirectConnectGatewayAssociationState = "associating"
	DirectConnectGatewayAssociationStateAssociated     DirectConnectGatewayAssociationState = "associated"
	DirectConnectGatewayAssociationStateDisassociating DirectConnectGatewayAssociationState = "disassociating"
	DirectConnectGatewayAssociationStateDisassociated  DirectConnectGatewayAssociationState = "disassociated"
	DirectConnectGatewayAssociationStateUpdating       DirectConnectGatewayAssociationState = "updating"
)

type DirectConnectGatewayAttachment struct {

	// The state of the attachment. The following are the possible values:
	//
	//     *
	// attaching: The initial state after a virtual interface is created using the
	// Direct Connect gateway.
	//
	//     * attached: The Direct Connect gateway and virtual
	// interface are attached and ready to pass traffic.
	//
	//     * detaching: The initial
	// state after calling DeleteVirtualInterface.
	//
	//     * detached: The virtual
	// interface is detached from the Direct Connect gateway. Traffic flow between the
	// Direct Connect gateway and virtual interface is stopped.
	AttachmentState DirectConnectGatewayAttachmentState

	// The type of attachment.
	AttachmentType DirectConnectGatewayAttachmentType

	// The ID of the Direct Connect gateway.
	DirectConnectGatewayId *string

	// The error message if the state of an object failed to advance.
	StateChangeError *string

	// The ID of the virtual interface.
	VirtualInterfaceId *string

	// The ID of the AWS account that owns the virtual interface.
	VirtualInterfaceOwnerAccount *string

	// The AWS Region where the virtual interface is located.
	VirtualInterfaceRegion *string
}

type DirectConnectGatewayAttachmentState string

const (
	DirectConnectGatewayAttachmentStateAttaching DirectConnectGatewayAttachmentState = "attaching"
	DirectConnectGatewayAttachmentStateAttached  DirectConnectGatewayAttachmentState = "attached"
	DirectConnectGatewayAttachmentStateDetaching DirectConnectGatewayAttachmentState = "detaching"
	DirectConnectGatewayAttachmentStateDetached  DirectConnectGatewayAttachmentState = "detached"
)

type DirectConnectGatewayAttachmentType string

const (
	DirectConnectGatewayAttachmentTypeTransitvirtualinterface DirectConnectGatewayAttachmentType = "TransitVirtualInterface"
	DirectConnectGatewayAttachmentTypePrivatevirtualinterface DirectConnectGatewayAttachmentType = "PrivateVirtualInterface"
)

type DirectConnectGatewayState string

const (
	DirectConnectGatewayStatePending   DirectConnectGatewayState = "pending"
	DirectConnectGatewayStateAvailable DirectConnectGatewayState = "available"
	DirectConnectGatewayStateDeleting  DirectConnectGatewayState = "deleting"
	DirectConnectGatewayStateDeleted   DirectConnectGatewayState = "deleted"
)

type DirectConnectServerException struct {
	Message *string
}

type DuplicateTagKeysException struct {
	Message *string
}

type GatewayType string

const (
	GatewayTypeVirtualprivategateway GatewayType = "virtualPrivateGateway"
	GatewayTypeTransitgateway        GatewayType = "transitGateway"
)

type HasLogicalRedundancy string

const (
	HasLogicalRedundancyUnknown HasLogicalRedundancy = "unknown"
	HasLogicalRedundancyYes     HasLogicalRedundancy = "yes"
	HasLogicalRedundancyNo      HasLogicalRedundancy = "no"
)

type Interconnect struct {

	// The Direct Connect endpoint on which the physical connection terminates.
	AwsDevice *string

	// The Direct Connect endpoint on which the physical connection terminates.
	AwsDeviceV2 *string

	// The bandwidth of the connection.
	Bandwidth *string

	// Indicates whether the interconnect supports a secondary BGP in the same address
	// family (IPv4/IPv6).
	HasLogicalRedundancy HasLogicalRedundancy

	// The ID of the interconnect.
	InterconnectId *string

	// The name of the interconnect.
	InterconnectName *string

	// The state of the interconnect. The following are the possible values:
	//
	//     *
	// requested: The initial state of an interconnect. The interconnect stays in the
	// requested state until the Letter of Authorization (LOA) is sent to the
	// customer.
	//
	//     * pending: The interconnect is approved, and is being
	// initialized.
	//
	//     * available: The network link is up, and the interconnect is
	// ready for use.
	//
	//     * down: The network link is down.
	//
	//     * deleting: The
	// interconnect is being deleted.
	//
	//     * deleted: The interconnect is deleted.
	//
	//
	// * unknown: The state of the interconnect is not available.
	InterconnectState InterconnectState

	// Indicates whether jumbo frames (9001 MTU) are supported.
	JumboFrameCapable *bool

	// The ID of the LAG.
	LagId *string

	// The time of the most recent call to DescribeLoa for this connection.
	LoaIssueTime *time.Time

	// The location of the connection.
	Location *string

	// The name of the service provider associated with the interconnect.
	ProviderName *string

	// The AWS Region where the connection is located.
	Region *string

	// The tags associated with the interconnect.
	Tags []*Tag
}

type InterconnectState string

const (
	InterconnectStateRequested InterconnectState = "requested"
	InterconnectStatePending   InterconnectState = "pending"
	InterconnectStateAvailable InterconnectState = "available"
	InterconnectStateDown      InterconnectState = "down"
	InterconnectStateDeleting  InterconnectState = "deleting"
	InterconnectStateDeleted   InterconnectState = "deleted"
	InterconnectStateUnknown   InterconnectState = "unknown"
)

type Lag struct {

	// Indicates whether the LAG can host other connections.
	AllowsHostedConnections *bool

	// The AWS Direct Connect endpoint that hosts the LAG.
	AwsDevice *string

	// The AWS Direct Connect endpoint that hosts the LAG.
	AwsDeviceV2 *string

	// The connections bundled by the LAG.
	Connections []*Connection

	// The individual bandwidth of the physical connections bundled by the LAG. The
	// possible values are 1Gbps and 10Gbps.
	ConnectionsBandwidth *string

	// Indicates whether the LAG supports a secondary BGP peer in the same address
	// family (IPv4/IPv6).
	HasLogicalRedundancy HasLogicalRedundancy

	// Indicates whether jumbo frames (9001 MTU) are supported.
	JumboFrameCapable *bool

	// The ID of the LAG.
	LagId *string

	// The name of the LAG.
	LagName *string

	// The state of the LAG. The following are the possible values:
	//
	//     * requested:
	// The initial state of a LAG. The LAG stays in the requested state until the
	// Letter of Authorization (LOA) is available.
	//
	//     * pending: The LAG has been
	// approved and is being initialized.
	//
	//     * available: The network link is
	// established and the LAG is ready for use.
	//
	//     * down: The network link is
	// down.
	//
	//     * deleting: The LAG is being deleted.
	//
	//     * deleted: The LAG is
	// deleted.
	//
	//     * unknown: The state of the LAG is not available.
	LagState LagState

	// The location of the LAG.
	Location *string

	// The minimum number of physical connections that must be operational for the LAG
	// itself to be operational.
	MinimumLinks *int32

	// The number of physical connections bundled by the LAG, up to a maximum of 10.
	NumberOfConnections *int32

	// The ID of the AWS account that owns the LAG.
	OwnerAccount *string

	// The name of the service provider associated with the LAG.
	ProviderName *string

	// The AWS Region where the connection is located.
	Region *string

	// The tags associated with the LAG.
	Tags []*Tag
}

type LagState string

const (
	LagStateRequested LagState = "requested"
	LagStatePending   LagState = "pending"
	LagStateAvailable LagState = "available"
	LagStateDown      LagState = "down"
	LagStateDeleting  LagState = "deleting"
	LagStateDeleted   LagState = "deleted"
	LagStateUnknown   LagState = "unknown"
)

type Loa struct {

	// The binary contents of the LOA-CFA document.
	LoaContent []byte

	// The standard media type for the LOA-CFA document. The only supported value is
	// application/pdf.
	LoaContentType LoaContentType
}

type LoaContentType string

const (
	LoaContentTypePdf LoaContentType = "application/pdf"
)

type Location struct {

	// The available port speeds for the location.
	AvailablePortSpeeds []*string

	// The name of the service provider for the location.
	AvailableProviders []*string

	// The code for the location.
	LocationCode *string

	// The name of the location. This includes the name of the colocation partner and
	// the physical site of the building.
	LocationName *string

	// The AWS Region for the location.
	Region *string
}

type NewBGPPeer struct {

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration.
	Asn *int32

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string
}

type NewPrivateVirtualInterface struct {

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration. The valid values are 1-2147483647.
	//
	// This member is required.
	Asn *int32

	// The name of the virtual interface assigned by the customer network. The name has
	// a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a
	// hyphen (-).
	//
	// This member is required.
	VirtualInterfaceName *string

	// The ID of the VLAN.
	//
	// This member is required.
	Vlan *int32

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string

	// The ID of the Direct Connect gateway.
	DirectConnectGatewayId *string

	// The maximum transmission unit (MTU), in bytes. The supported values are 1500 and
	// 9001. The default value is 1500.
	Mtu *int32

	// The tags associated with the private virtual interface.
	Tags []*Tag

	// The ID of the virtual private gateway.
	VirtualGatewayId *string
}

type NewPrivateVirtualInterfaceAllocation struct {

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration. The valid values are 1-2147483647.
	//
	// This member is required.
	Asn *int32

	// The name of the virtual interface assigned by the customer network. The name has
	// a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a
	// hyphen (-).
	//
	// This member is required.
	VirtualInterfaceName *string

	// The ID of the VLAN.
	//
	// This member is required.
	Vlan *int32

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string

	// The maximum transmission unit (MTU), in bytes. The supported values are 1500 and
	// 9001. The default value is 1500.
	Mtu *int32

	// The tags associated with the private virtual interface.
	Tags []*Tag
}

type NewPublicVirtualInterface struct {

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration. The valid values are 1-2147483647.
	//
	// This member is required.
	Asn *int32

	// The name of the virtual interface assigned by the customer network. The name has
	// a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a
	// hyphen (-).
	//
	// This member is required.
	VirtualInterfaceName *string

	// The ID of the VLAN.
	//
	// This member is required.
	Vlan *int32

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string

	// The routes to be advertised to the AWS network in this Region. Applies to public
	// virtual interfaces.
	RouteFilterPrefixes []*RouteFilterPrefix

	// The tags associated with the public virtual interface.
	Tags []*Tag
}

type NewPublicVirtualInterfaceAllocation struct {

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration. The valid values are 1-2147483647.
	//
	// This member is required.
	Asn *int32

	// The name of the virtual interface assigned by the customer network. The name has
	// a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a
	// hyphen (-).
	//
	// This member is required.
	VirtualInterfaceName *string

	// The ID of the VLAN.
	//
	// This member is required.
	Vlan *int32

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string

	// The routes to be advertised to the AWS network in this Region. Applies to public
	// virtual interfaces.
	RouteFilterPrefixes []*RouteFilterPrefix

	// The tags associated with the public virtual interface.
	Tags []*Tag
}

type NewTransitVirtualInterface struct {

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration. The valid values are 1-2147483647.
	Asn *int32

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string

	// The ID of the Direct Connect gateway.
	DirectConnectGatewayId *string

	// The maximum transmission unit (MTU), in bytes. The supported values are 1500 and
	// 9001. The default value is 1500.
	Mtu *int32

	// The tags associated with the transitive virtual interface.
	Tags []*Tag

	// The name of the virtual interface assigned by the customer network. The name has
	// a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a
	// hyphen (-).
	VirtualInterfaceName *string

	// The ID of the VLAN.
	Vlan *int32
}

type NewTransitVirtualInterfaceAllocation struct {

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration. The valid values are 1-2147483647.
	Asn *int32

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string

	// The maximum transmission unit (MTU), in bytes. The supported values are 1500 and
	// 9001. The default value is 1500.
	Mtu *int32

	// The tags associated with the transitive virtual interface.
	Tags []*Tag

	// The name of the virtual interface assigned by the customer network. The name has
	// a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a
	// hyphen (-).
	VirtualInterfaceName *string

	// The ID of the VLAN.
	Vlan *int32
}

type ResourceTag struct {

	// The Amazon Resource Name (ARN) of the resource.
	ResourceArn *string

	// The tags.
	Tags []*Tag
}

type RouteFilterPrefix struct {

	// The CIDR block for the advertised route. Separate multiple routes using commas.
	// An IPv6 CIDR must use /64 or shorter.
	Cidr *string
}

type Tag struct {

	// The key.
	//
	// This member is required.
	Key *string

	// The value.
	Value *string
}

type TooManyTagsException struct {
	Message *string
}

type VirtualGateway struct {

	// The ID of the virtual private gateway.
	VirtualGatewayId *string

	// The state of the virtual private gateway. The following are the possible
	// values:
	//
	//     * pending: Initial state after creating the virtual private
	// gateway.
	//
	//     * available: Ready for use by a private virtual interface.
	//
	//     *
	// deleting: Initial state after deleting the virtual private gateway.
	//
	//     *
	// deleted: The virtual private gateway is deleted. The private virtual interface
	// is unable to send traffic over this gateway.
	VirtualGatewayState *string
}

type VirtualInterface struct {

	// The address family for the BGP peer.
	AddressFamily AddressFamily

	// The IP address assigned to the Amazon interface.
	AmazonAddress *string

	// The autonomous system number (ASN) for the Amazon side of the connection.
	AmazonSideAsn *int64

	// The autonomous system (AS) number for Border Gateway Protocol (BGP)
	// configuration. The valid values are 1-2147483647.
	Asn *int32

	// The authentication key for BGP configuration. This string has a minimum length
	// of 6 characters and and a maximun lenth of 80 characters.
	AuthKey *string

	// The Direct Connect endpoint on which the virtual interface terminates.
	AwsDeviceV2 *string

	// The BGP peers configured on this virtual interface.
	BgpPeers []*BGPPeer

	// The ID of the connection.
	ConnectionId *string

	// The IP address assigned to the customer interface.
	CustomerAddress *string

	// The customer router configuration.
	CustomerRouterConfig *string

	// The ID of the Direct Connect gateway.
	DirectConnectGatewayId *string

	// Indicates whether jumbo frames (9001 MTU) are supported.
	JumboFrameCapable *bool

	// The location of the connection.
	Location *string

	// The maximum transmission unit (MTU), in bytes. The supported values are 1500 and
	// 9001. The default value is 1500.
	Mtu *int32

	// The ID of the AWS account that owns the virtual interface.
	OwnerAccount *string

	// The AWS Region where the virtual interface is located.
	Region *string

	// The routes to be advertised to the AWS network in this Region. Applies to public
	// virtual interfaces.
	RouteFilterPrefixes []*RouteFilterPrefix

	// The tags associated with the virtual interface.
	Tags []*Tag

	// The ID of the virtual private gateway. Applies only to private virtual
	// interfaces.
	VirtualGatewayId *string

	// The ID of the virtual interface.
	VirtualInterfaceId *string

	// The name of the virtual interface assigned by the customer network. The name has
	// a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a
	// hyphen (-).
	VirtualInterfaceName *string

	// The state of the virtual interface. The following are the possible values:
	//
	//
	// * confirming: The creation of the virtual interface is pending confirmation from
	// the virtual interface owner. If the owner of the virtual interface is different
	// from the owner of the connection on which it is provisioned, then the virtual
	// interface will remain in this state until it is confirmed by the virtual
	// interface owner.
	//
	//     * verifying: This state only applies to public virtual
	// interfaces. Each public virtual interface needs validation before the virtual
	// interface can be created.
	//
	//     * pending: A virtual interface is in this state
	// from the time that it is created until the virtual interface is ready to forward
	// traffic.
	//
	//     * available: A virtual interface that is able to forward
	// traffic.
	//
	//     * down: A virtual interface that is BGP down.
	//
	//     * deleting: A
	// virtual interface is in this state immediately after calling
	// DeleteVirtualInterface until it can no longer forward traffic.
	//
	//     * deleted: A
	// virtual interface that cannot forward traffic.
	//
	//     * rejected: The virtual
	// interface owner has declined creation of the virtual interface. If a virtual
	// interface in the Confirming state is deleted by the virtual interface owner, the
	// virtual interface enters the Rejected state.
	//
	//     * unknown: The state of the
	// virtual interface is not available.
	VirtualInterfaceState VirtualInterfaceState

	// The type of virtual interface. The possible values are private and public.
	VirtualInterfaceType *string

	// The ID of the VLAN.
	Vlan *int32
}

type VirtualInterfaceState string

const (
	VirtualInterfaceStateConfirming VirtualInterfaceState = "confirming"
	VirtualInterfaceStateVerifying  VirtualInterfaceState = "verifying"
	VirtualInterfaceStatePending    VirtualInterfaceState = "pending"
	VirtualInterfaceStateAvailable  VirtualInterfaceState = "available"
	VirtualInterfaceStateDown       VirtualInterfaceState = "down"
	VirtualInterfaceStateDeleting   VirtualInterfaceState = "deleting"
	VirtualInterfaceStateDeleted    VirtualInterfaceState = "deleted"
	VirtualInterfaceStateRejected   VirtualInterfaceState = "rejected"
	VirtualInterfaceStateUnknown    VirtualInterfaceState = "unknown"
)

type VirtualInterfaceTestHistory struct {

	// The BGP peers that were put in the DOWN state as part of the virtual interface
	// failover test.
	BgpPeers []*string

	// The time that the virtual interface moves out of the DOWN state.
	EndTime *time.Time

	// The owner ID of the tested virtual interface.
	OwnerAccount *string

	// The time that the virtual interface moves to the DOWN state.
	StartTime *time.Time

	// The status of the virtual interface failover test.
	Status *string

	// The time that the virtual interface failover test ran in minutes.
	TestDurationInMinutes *int32

	// The ID of the virtual interface failover test.
	TestId *string

	// The ID of the tested virtual interface.
	VirtualInterfaceId *string
}